P.S. Free 2026 F5 F5CAB3 dumps are available on Google Drive shared by PassReview: https://drive.google.com/open?id=1wCVWyhwRzI1clz3WBoq8idtT5cFpuZ_J
Our F5CAB3 learning torrent helps you pass the exam in the shortest time and with the least amount of effort. And F5CAB3 guide aaterials have different versions. Besides, F5CAB3 actual exam can strengthen the weaknesses of your study habit in your practicing period. Whether you are an office worker or a student or even a housewife, time is your most important resource. We are a comprehensive service platform aiming at help you to pass F5CAB3 Exams in the shortest time and with the least amount of effort.
| Section | Objectives |
|---|---|
| Topic 1: Advanced Traffic Control | - Monitoring and Health Checks
|
| Topic 2: Traffic Management and Load Balancing | - Virtual Servers and Pools
|
| Topic 3: Traffic Processing and Policies | - Profiles and Protocol Handling
|
| Topic 4: F5 BIG-IP System Fundamentals | - Initial Configuration and System Components
|
| Topic 5: High Availability and Troubleshooting | - Device Service Clustering (DSC)
|
>> New F5CAB3 Test Materials <<
Keeping in view, the time constraints of professionals, our experts have devised F5CAB3 dumps PDF that suits your timetable and meets your exam requirements adequately. It is immensely helpful in enhancing your professional skills and expanding your exposure within a few-day times. This F5-CA brain dumps exam testing tool introduces you not only with the actual exam paper formation but also allows you to master various significant segments of the F5CAB3 syllabus.
NEW QUESTION # 38
Refer to the exhibit.
DNS queries from two internal DNS servers are being load-balanced to external DNS servers via a virtual server on a BIG-IP device. The DNS queries originate from:
192.168.10.100
192.168.10.200
and target:
192.168.2.150
All DNS queries destined for the external DNS servers fail.
Which property change should the BIG-IP Administrator make in the Virtual Server to resolve this issue?
(Choose one answer)
Answer: A
Explanation:
DNS traffic is primarily transported using UDP port 53. In the exhibit, the Virtual Server is configured with the Protocol set to TCP, which prevents standard DNS queries from being processed correctly. BIG-IP Virtual Servers must be configured with the correct Layer 4 protocol to match the application traffic they are handling.
According to the BIG-IP Administration: Data Plane Configuration documentation:
* The Protocol setting on a Virtual Server defines whether traffic is processed as TCP, UDP, or another supported transport protocol.
* Standard DNS queries and responses use UDP, while TCP is only required for DNS zone transfers (AXFR) or exceptionally large responses.
* When a DNS Virtual Server is incorrectly configured with TCP, UDP-based DNS queries are dropped, causing all requests to fail.
Why the other options are incorrect:
* A. Protocol profile (Client) to DNS_OPTIMIZEDA DNS profile enhances DNS functionality but does not correct an incorrect transport protocol configuration.
* B. Type to Performance (HTTP)Performance (HTTP) Virtual Servers are designed for HTTP traffic and are not suitable for DNS services.
* C. Source Address to 192.168.10.0/24The existing source IPs already fall within the allowed range, so this setting does not address the failure.
Correct Resolution:
Changing the Protocol to UDP aligns the Virtual Server with standard DNS transport requirements, allowing DNS queries to be successfully processed and load-balanced.
NEW QUESTION # 39
A BIG-IP Administrator creates an HTTP Virtual Server using an iApp template. After the Virtual Server is created, the user requests to change the destination IP addresses. The BIG-IP Administrator tries to change the destination IP address from 10.1.1.1 to 10.2.1.1 in Virtual Server settings, but receives the following error:
"The application service must be updated using an application management interface." What is causing this error?
Answer: B
Explanation:
In F5 BIG-IP administration, iApps are designed to manage complex application configurations as a single unit. When an iApp is deployed, it creates an "Application Service" object that owns all the associated LTM objects, such as Virtual Servers, Pools, and Nodes. By default, these iApps are created with Strict Updates enabled. Strict Updates is a safety mechanism that prevents administrators from making manual "out-of-band" changes to the individual objects created by the iApp. The system enforces this because manual changes would be overwritten the next time the iApp template is updated or re-entered.
When the administrator attempts to change the destination IP address directly on the Virtual Server object, the BIG-IP system checks the "Strict Updates" flag. If it is set to "Enabled," the system blocks the modification and generates the error message stating the service must be updated via the application management interface.
To resolve this, the administrator must navigate to the iApp >> Application Services menu, select the specific application service, and go to the "Reconfigure" tab. Within the iApp configuration form, the destination IP can be safely changed. Alternatively, if the administrator specifically wants to manage the objects manually and forgo the benefits of the iApp template management, they could disable "Strict Updates" in the iApp properties, though this is generally discouraged as it breaks the template's logic. The error is not related to subnetting or duplicate IPs, but strictly to the configuration authority assigned to the iApp service.
NEW QUESTION # 40
A configuration change is made on the standby member of a device group. What is displayed as
"Recommended Action" on the Device Management Overview screen?
Answer: D
Explanation:
The BIG-IP system uses a centralized management framework to ensure that all devices within a Sync- Failover group share a consistent configuration. When an administrator makes a change on any member of the group-whether it is the active or the standby device-the system detects a "ConfigSync" mismatch. The
"Device Management >> Overview" screen tracks these changes by comparing the commit ID and timestamps of the configurations across all peers.
If a change is made on the standby member, that device now possesses a more recent configuration than the other members of the group. Consequently, the BIG-IP GUI will display a status of "Changes Pending" and suggest a Recommended Action to resolve the discrepancy. In this scenario, the correct action is to Synchronize the standby member configuration to the group. This push operation will copy the updated configuration from the standby device to the active device (and any other peers), bringing the entire cluster back into a "In Sync" status. It is important to note that BIG-IP allows bi-directional synchronization; you do not have to be on the active device to push a configuration. However, administrators must be cautious:
choosing Option C (Synchronizing the active member to the group) would overwrite the changes just made on the standby device with the older configuration from the active device, effectively reverting the changes. The Recommended Action always points toward the direction that propagates the most recent change to the rest of the group.
NEW QUESTION # 41
Refer to the exhibit.
A BIG-IP Administrator configures a new VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device. Which VLAN setting should be changed to prevent this issue?
Answer: C
Explanation:
The exhibit shows the advanced configuration of a VLAN where the Fail-safe option is checked. VLAN Fail- safe is a high-availability feature used to monitor network connectivity on a specific VLAN. When enabled, the BIG-IP system monitors the VLAN for network traffic. If the system does not detect any "useful" traffic on the VLAN within the specified Fail-safe Timeout (which is 90 seconds in the exhibit), it attempts to generate traffic by pinging the default gateway or other devices. If it still detects no traffic, the BIG-IP concludes that the VLAN is unreachable or the network interface has failed, and it triggers a "Fail-safe Action"-in this case, "Reboot" or a failover to the peer device in the HA group.
Because the administrator has just created a new VLAN that "does NOT yet have any traffic," the Fail-safe mechanism triggers immediately after the 90-second timeout period. Since no devices are yet communicating on this VLAN, the BIG-IP incorrectly assumes there is a hardware or cabling failure and forces a failover to ensure the standby device (which might have better connectivity) takes over. To prevent this unwanted failover, the administrator should uncheck the Fail-safe box for that specific VLAN until the VLAN is fully populated with active nodes and regular traffic. Once the application is live and traffic is flowing, Fail-safe can be re-enabled to provide an additional layer of redundancy. Auto Last Hop (Option A) and Source Check (Option B) are routing and security features that do not trigger HA failover events.
NEW QUESTION # 42
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue? (Choose one answer)
Answer: C
Explanation:
SSH is a Layer 4 TCP-based protocol that operates on TCP port 22 and does not use HTTP in any capacity. In the exhibit, the Virtual Server is configured with an HTTP Profile applied, which is inappropriate for SSH traffic and causes connection failures.
According to the BIG-IP Administration: Data Plane Configuration documentation:
An HTTP profile must only be applied to Virtual Servers handling HTTP or HTTPS traffic.
When an HTTP profile is attached, BIG-IP expects HTTP headers and attempts to parse application-layer data.
Non-HTTP protocols such as SSH, FTP (control), SMTP, and other raw TCP services will fail if an HTTP profile is enabled.
Why the other options are incorrect:
A). Set Protocol to UDPSSH uses TCP, not UDP. Changing the protocol would break SSH entirely.
B). Set Source Address to 10.1.1.2The source address setting controls client access restrictions and is unrelated to protocol parsing issues.
C). Set Destination Address/Mask to 0.0.0.0/0The destination address is already valid for a specific SSH service and does not impact protocol handling.
Correct Resolution:
The BIG-IP Administrator should remove the HTTP Profile (set it to None) so the Virtual Server functions as a pure Layer 4 TCP service, allowing SSH connections to pass through successfully.
NEW QUESTION # 43
......
Our F5CAB3 exam questions just focus on what is important and help you achieve your goal. With high-quality F5CAB3 guide materials and flexible choices of learning mode, they would bring about the convenience and easiness for you. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. In your every stage of review, our F5CAB3 practice prep will make you satisfied.
F5CAB3 Reliable Exam Online: https://www.passreview.com/F5CAB3_exam-braindumps.html
DOWNLOAD the newest PassReview F5CAB3 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1wCVWyhwRzI1clz3WBoq8idtT5cFpuZ_J