To further strengthen your preparation for the Nokia NRN-522 exam, PracticeVCE provides an online Nokia Practice Test engine. With this interactive tool, you can practice the NRN-522 Exam questions in a simulated exam environment. The NRN-522 online practice test engine is designed based on the real Nokia NRN-522 Exam patterns, allowing you to familiarize yourself with the format and gain confidence for the actual Nokia NRN-522 exam. Practicing with the Nokia NRN-522 exam questions will not only increase your understanding but also boost your overall performance.
| Section | Objectives |
|---|---|
| 5G RAN Products and Solutions Management | - Network Connectivity and Access
|
| Software Management | - Base Station Software Operations
|
| Fault and Alarm Management | - Monitoring and Troubleshooting
|
| Configuration Management | - Parameter Administration
|
| Remote Operations of 5G Radio Access Networks | - 5G RAN Operations Center Procedures
|
All NRN-522 exam questions are available at an affordable cost and fulfill all your training needs. PracticeVCE knows that applicants of the Nokia NRN-522 examination are different from each other. Each candidate has different study styles and that's why we offer our Nokia NRN-522 product in three formats. These formats are NRN-522 PDF, desktop practice test software, and web-based practice exam.
NEW QUESTION # 57
What is the primary purpose of the secure IPsec VPN tunnel established between a centralized Operations Center and a remote 5G site's transport network?
Answer: A
Explanation:
Centralized Operations Centers connect to many geographically distributed 5G sites over shared transport infrastructure that may include third-party or public network segments. A secure tunnel, typically using IPsec, is established between the Operations Center's management domain and the site's security gateway to encrypt and authenticate all Operations, Administration, and Maintenance (O and M) traffic - including configuration commands, alarm and performance data, and software transfers - protecting it from interception, tampering, or unauthorized access. This secure channel has no effect on RF transmit power, which is governed by separate cell configuration parameters, and it does not perform software compression, which is a function of the software packaging process itself. It also does not replace alarm monitoring, which is handled by NetAct's Fault Management module; rather, the VPN ensures that alarm data itself reaches the Operations Center securely.
NEW QUESTION # 58
When configuring NR-NR (5G-to-5G) neighbor relations to support mobility between two 5G cells operating on different frequency bands, which type of neighbor relation must be established?
Answer: B
Explanation:
When two 5G NR cells operate on different frequency bands (or different carrier frequencies within the same band), mobility between them requires an inter-frequency neighbor relation to be configured. This relation must include the necessary frequency information identifying the target carrier, along with measurement configuration parameters that instruct the UE when and how to measure the candidate target frequency - since, unlike intra-frequency measurements, inter-frequency measurements typically require measurement gaps and are not performed continuously by the UE. An intra-frequency neighbor relation would only be appropriate if both cells operated on the same carrier frequency, which is not the case here. Inter-band 5G-to-
5G handovers are not automatic without configuration; the network must explicitly define the relation and measurement parameters to enable the UE to detect and report the target cell. EN-DC relations are specifically for LTE-NR dual connectivity scenarios and are unrelated to NR-NR mobility between two 5G cells.
NEW QUESTION # 59
A 'Loss of Synchronization Reference' alarm appears on a 5G cell. Which input to the BTS is this alarm most directly associated with?
Answer: B
Explanation:
5G base stations require accurate frequency, and for many configurations (especially TDD operation and features like carrier aggregation) phase/time synchronization, typically derived from a GNSS receiver such as GPS or from a network-distributed timing source such as Synchronous Ethernet or PTP/IEEE 1588 over the transport network. A 'Loss of Synchronization Reference' alarm indicates the BTS has lost access to its timing source. This can lead to degraded performance and, in TDD deployments, can cause uplink/downlink timing misalignment between neighboring cells (interference), and may force the cell out of service if synchronization cannot be maintained. The correct troubleshooting focus is therefore the GNSS antenna
/receiver, related cabling, satellite visibility/obstructions, or the alternative network-based synchronization path - not neighbor relation configuration, handover KPIs, or NetAct account credentials, none of which relate to the BTS's timing reference source.
NEW QUESTION # 60
A NOC team needs to apply an identical parameter change - updating a neighbor relation threshold - across
200 cells in a region. What NetAct CM capability is best suited to perform this efficiently and consistently?
Answer: C
Explanation:
NetAct's Bulk Configuration Management capability, often referred to as Mass Update, is specifically designed for scenarios where the same configuration change needs to be applied consistently across a large number of network elements or cells. Rather than requiring an engineer to manually access each cell individually - which would be slow, error-prone, and difficult to audit - Bulk CM allows the target parameter, new value, and the set of affected cells to be defined once, with the change then propagated and applied consistently across all selected targets, typically with built-in logging and the ability to verify success or failure per element. This significantly reduces the time required for large-scale changes and ensures consistency, which is particularly important for parameters like neighbor relation thresholds where inconsistent configuration across a cluster could create uneven mobility behavior. Software Management's delivery function addresses SW lifecycle, not parameter changes, and Fault Management is unrelated to configuration provisioning.
NEW QUESTION # 61
A base station has the necessary software installed to support a new advanced scheduling feature, but the feature remains inactive. The NOC engineer is informed that a license-related step is required. What is the most likely explanation?
Answer: C
Explanation:
In many telecom equipment vendors' licensing models, including Nokia's, having the software capability to support a feature installed on the base station is necessary but not always sufficient for that feature to be operational. Many advanced or optional features require a corresponding license key to be applied and activated, which represents the commercial entitlement to use that capability. This separation allows operators to purchase and activate features incrementally as needed, without requiring different software builds for different feature sets. A NOC engineer encountering an inactive feature with the correct software already installed should verify the license status for that feature and, if needed, coordinate with the appropriate team to apply or activate the required license. This is unrelated to software downgrades, hardware replacement, or waiting for a future software upgrade - none of which would resolve a licensing gap, since the underlying software already supports the feature.
NEW QUESTION # 62
......
Our website offer you the latest NRN-522 dumps torrent in pdf version and test engine version, which selected according to your study habit. You can print our NRN-522 practice questions out and share the materials with your classmates and friends. The test engine version is a way of exam simulation that helps you get used to the atmosphere of NRN-522 Real Exam and solve the problems with great confidence.
NRN-522 Latest Mock Test: https://www.practicevce.com/Nokia/NRN-522-practice-exam-dumps.html