To improve the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam questions, TrainingQuiz always upgrades and updates its NSEI_OTS_AR-7.6 dumps PDF format and it also makes changes according to the syllabus of the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam. In the Web-Based Fortinet NSEI_OTS_AR-7.6 Practice Exam, the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam dumps given are actual and according to the syllabus of the test. This Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice exam is compatible with all operating systems. Likewise, this Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice test is browser-based so it needs no special installation to function properly. Firefox, Chrome, IE, Opera, Safari, and all the major browsers support this Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice exam.
| Section | Objectives |
|---|---|
| Topic 1: Network Access Control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
| Topic 2: Network Security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
| Topic 3: Asset Management | - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC - Use Fortinet Security Fabric for an OT network |
| Topic 4: Monitoring and Risk Assessment | - Perform risk assessment and management - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers |
>> Practice NSEI_OTS_AR-7.6 Exams Free <<
The Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 certification is a valuable credential earned by individuals to validate their skills and competence to perform certain job tasks. Your Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 certification is usually displayed as proof that you’ve been trained, educated, and prepared to meet the specific requirement for your professional role. The Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 Certification enables you to move ahead in your career later.
NEW QUESTION # 13
Refer to the exhibits.
The Playbook Monitor dashboard and the analysis of the corresponding incident analysis are shown. You created the playbook with the objective of automatically attaching the report to the incident that was created.
Which two statements are correct? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are C and D .
Option D is correct because the Playbook Monitor clearly shows the starter as On_Demand and the trigger as user(admin) . The study guide states that "ON_DEMAND: The playbook runs when an administrator manually starts it" and also notes that to run it manually, you select the playbook and click Run . This exactly matches the exhibit, so the playbook was manually triggered.
Option C is also correct. The study guide explains that "tasks run one after another" and that "if needed, the output of one task can be used by the tasks that follow it." It also gives an example where workflow logic matters, such as creating an incident and then attaching details to it. In the exhibit, the sequence shown is Attach_report , then Run_report , then Create_Incident , while the incident analysis shows no report attached . Since the report must exist and the incident must already be available before it can be attached properly, the task order is wrong and must be reordered.
Option B is incorrect because the monitor shows multiple tasks completed successfully, not only Create_Incident . Option A is not the best answer because the main problem demonstrated by the exhibits is not simply waiting time, but the incorrect workflow order. The playbook completed successfully, yet the report is still not attached, which indicates a design issue in the task sequence rather than just a delay.
NEW QUESTION # 14
Refer to the exhibit.
A partial OT network is shown.
You have recently removed the air gap in the network to provide full connectivity.
What must you configure to protect your OT network from external attacks?
Answer: A
Explanation:
The correct answer is D . Removing the air gap creates connectivity between the OT environment and external networks, significantly increasing exposure to unauthorized access and cyberattacks. Fortinet explains that the expansion of remote connectivity and IT/OT interconnections increases the OT attack surface and that the modern threat landscape requires IPS to block a wider range of threats . In the shown Purdue-style topology, FortiGate_Level5 is positioned at the upper boundary toward external connectivity and is therefore the appropriate enforcement point for protecting against attacks entering from outside the OT environment. Virtual patching at Level 2 is intended primarily to compensate for known vulnerabilities on specific OT devices that cannot yet be patched. Application Control provides industrial protocol visibility and command-level control, while merely enabling OT signatures at Level 3 does not replace perimeter intrusion prevention. Consequently, IPS belongs on FortiGate_Level5 .
NEW QUESTION # 15
Refer to the exhibit. A partial OT network is shown. You must improve the security of this OT network and implement internal segmentation between network 1 and network 2. How can you achieve the segmentation?
(Choose one answer)
Answer: B
Explanation:
The correct answer is D. You can configure forward domain IDs for each network . The study guide explains that in FortiGate transparent mode, "all interfaces belong to the same broadcast domain, even interfaces with different VLAN IDs" and then states that you should "use this command to subdivide into multiple broadcast domains" with set forward-domain < domain_ID > . It further explains that
"interfaces with the same domain ID belong to the same broadcast domain" and "traffic arriving on one interface is broadcast only to interfaces in the same forward domain ID." This is exactly the mechanism used to separate one internal network from another and improve segmentation.
The other options do not match this requirement. Universal ZTNA is described as controlling user access to applications , not segmenting two internal OT networks. An explicit software switch is for controlling intra- switch or intra-VLAN traffic inside the same software switch broadcast domain, which is more aligned with microsegmentation than separating two routed internal networks. One traffic VDOM does not create segmentation by itself; segmentation with VDOMs requires multiple VDOMs, not one. Therefore, the best choice for segmenting network 1 and network 2 in this scenario is to assign separate forward domain IDs .
NEW QUESTION # 16
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: B
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 17
Match each industrial protocol to its corresponding characteristics.
Select each OT industrial protocol in the column on the left and drag and drop it into the blank space next to its corresponding characteristic in the column on the right. You must match all four industrial protocols to their characteristics in the work area.
Answer:
Explanation:
Explanation:
Industrial Protocol
Correct Characteristic
POWERLINK
Mainly used for the transmission of process data
EtherCAT
Offers real-time data transmission in a primary-secondary configuration Modbus Uses client/server communication Ethernet/IP Based entirely on Ethernet standards The correct mappings follow the industrial Ethernet characteristics defined in the OT Security 7.6 curriculum.
Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the standard Ethernet
/TCP-IP architecture. EtherCAT is designed for deterministic real-time communication and specifically operates in a primary-secondary configuration while bypassing OSI layers 3 through 6. POWERLINK is an open real-time industrial Ethernet protocol that uses OSI layers 2 and 7 and is mainly intended for transmitting process data. Modbus , by contrast, uses a client/server communication model in which the server responds only after receiving a request from a client; it is not considered a real-time transmission protocol. These distinctions uniquely determine all four drag-and-drop placements.
NEW QUESTION # 18
......
At the information age, knowledge is wealth as well as productivity. All excellent people will become outstanding one day as long as one masters skill. In order to train qualified personnel, our company has launched the NSEI_OTS_AR-7.6 Study Materials for job seekers. We are professional to help tens of thousands of the candidates get their NSEI_OTS_AR-7.6 certification with our high quality of NSEI_OTS_AR-7.6 exam questions and live a better life.
NSEI_OTS_AR-7.6 Practice Engine: https://www.trainingquiz.com/NSEI_OTS_AR-7.6-practice-quiz.html