What's more, part of that PassSureExam CWNA-109 dumps now are free: https://drive.google.com/open?id=1NJJ_jhdccOEmomlE-GoKwDTqHqXUmrRN
To cater to the different needs of different customers, our product for CWNA-109 exam have provide three different versions of practice materials. I f you are more like the paper version, then PDF version will be your choice, since this version can be printed. If you are more likely to use the computer, the Desktop version is your choice, this version can provide you the feeling of the Real CWNA-109 Exam.If you prefer to practice the materials on online, then online version is your choice, this version support all web browers, and you can practice it in your free time if you want. Just try it, there is always a version for you.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
>> CWNA-109 Interactive EBook <<
We have a lot of regular customers for a long-term cooperation now since they have understood how useful and effective our CWNA-109 actual exam is. In order to let you have a general idea about the shining points of our CWNA-109 training materials, we provide the free demos on our website for you to free download. You can check the information and test the functions by the three kinds of the free demos according to our three versions of the CWNA-109 Exam Questions.
NEW QUESTION # 166
When considering data rates available in HT and VHT PHY devices, in addition to the modulation, coding, channel width, and spatial streams, what impacts the data rate according to the MCS tables?
Answer: A
Explanation:
The guard interval is a short period of time inserted between the symbols of an OFDM signal to prevent inter-symbol interference and improve the robustness of the transmission1. The guard interval can have different values depending on the 802.11 standard and the configuration of the device. For example, 802.11n supports two guard intervals: 800 ns (normal) and 400 ns (short)2. 802.11ac supports the same guard intervals as 802.11n, plus an optional 200 ns guard interval for 80 MHz and 160 MHz channels3. 802.11ax supports three guard intervals: 800 ns, 1600 ns, and 3200 ns4.
The guard interval affects the data rate because it determines the duration of each symbol. A shorter guard interval means more symbols can be transmitted in a given time, resulting in a higher data rate. However, a shorter guard interval also means less protection against inter-symbol interference, which may degrade the signal quality and increase the error rate. Therefore, there is a trade-off between data rate and reliability when choosing the guard interval.
The MCS tables for HT and VHT PHY devices show the data rates for different combinations of modulation, coding, channel width, spatial streams, and guard intervals. For example, for a VHT device using MCS 9 with QAM-256 modulation, 5/6 coding rate, 80 MHz channel width, and one spatial stream, the data rate is 433.3 Mbps with a normal guard interval (800 ns) and 486.7 Mbps with a short guard interval (400 ns)2. Therefore, the guard interval impacts the data rate according to the MCS tables.
NEW QUESTION # 167
You are tasked with performing a throughput test on the WLAN. The manager asks that you use open source tools to reduce costs. What open source tool is designed to perform a throughput test?
Answer: C
Explanation:
iPerf is an open source tool that is designed to perform a throughput test on the WLAN. iPerf is a cross-platform command-line tool that can measure the bandwidth and quality of network links by generating TCP or UDP traffic between two endpoints. iPerf can run as either a server or a client mode, depending on whether it receives or sends traffic. iPerf can also report various metrics of network performance, such as throughput, jitter, packet loss, delay, and TCP window size. To perform a throughput test on the WLAN using iPerf, one device needs to run iPerf in server mode and another device needs to run iPerf in client mode. The devices need to be connected to the same WLAN network and have their IP addresses configured properly. The device running iPerf in client mode needs to specify the IP address of the device running iPerf in server mode as well as other parameters such as protocol, port number, duration, interval, bandwidth limit, packet size, etc. The device running iPerf in server mode will listen for incoming connections from the client device and send back acknowledgments or responses depending on the protocol used. The device running iPerf in client mode will send traffic to the server device according to the specified parameters and measure the network performance. The device running iPerf in client mode will display the results of the throughput test at the end of the test or at regular intervals during the test. The results can show the average, minimum, maximum, and instantaneous throughput of the network link, as well as other metrics such as jitter, packet loss, delay, and TCP window size.
NEW QUESTION # 168
You are a small business wireless network consultant and provide WLAN services for various companies.
You receive a call from one of your customers stating that their laptop computers suddenly started experiencing much slower data transfers while connected to the WLAN. This company is located in a multi- tenant office building and the WLAN was designed to support laptops, tablets and mobile phones. What could cause a sudden change in performance for the laptop computers?
Answer: D
Explanation:
A possible cause of a sudden change in performance for the laptop computers is that a new tenant in the building has set their AP to the same RF channel that your customer is using. This can create co-channel interference (CCI), which is a situation where two or more APs or devices use the same or overlapping channels in the same area. CCI can degrade the performance of WLANs by increasing contention, collisions, retransmissions, and latency. CCI can also reduce the effective range and throughput of WLANs by lowering the signal-to-noise ratio (SNR). To avoid or mitigate CCI, it is recommended to use non-overlapping channels, adjust transmit power levels, or implement channel management techniques such as dynamic frequency selection (DFS) or load balancing. The sky condition, antenna position, or Bluetooth headset are not likely to cause a sudden change in performance for the laptop computers. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 81; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 71.
NEW QUESTION # 169
What feature of 802.1 lax (HE) may impact design decisions related to AP placement and the spacing between same-channel BSS cells (3SAs) because it is designed to reduce overlapping BSS contention?
Answer: D
Explanation:
In the 802.11ax (High Efficiency, HE) amendment, one of the key features introduced is BSS (Basic Service Set) Coloring. This feature is designed to mitigate issues arising from overlapping BSSs (OBSS), which can lead to contention and interference in dense wireless environments.
BSS Coloring works by:
Assigning a "color" (a small number) to each BSS: This helps devices differentiate between frames from their own BSS and those from neighboring BSSs.
Reducing Inter-BSS Interference: Devices can ignore frames from different BSSs (with a different
"color") under certain conditions, reducing the impact of OBSS interference. Improving Spatial Reuse: By distinguishing between transmissions from different BSSs, devices can make more informed decisions about when to transmit, improving the efficiency of spatial reuse and reducing unnecessary contention.
This feature directly impacts design decisions related to AP placement and the spacing between same-channel BSS cells, as it allows for closer placement of APs on the same channel without significantly increasing interference, thus improving overall network capacity and efficiency. The other options, while features of 802.11ax, do not directly pertain to reducing overlapping BSS contention in the same manner:
TWT (Target Wake Time) optimizes device sleep schedules to conserve power. Uplink MU-MIMO enhances uplink data transmission capabilities but doesn't specifically address OBSS contention.
6 GHz Band Support introduces new spectrum for Wi-Fi use but is not a feature aimed at reducing OBSS contention within the 802.11ax framework.
NEW QUESTION # 170
Which IEEE 802.11 physical layer (PHY) specification includes support for and compatibility with both ERP and HR/DSSS?
Answer: D
Explanation:
The HT (802.11n) physical layer (PHY) specification includes support for and compatibility with both ERP and HR/DSSS. ERP stands for Extended Rate PHY, which is an extension of the original DSSS (Direct Sequence Spread Spectrum) PHY that supports data rates up to 54 Mbps in the 2.4 GHz band. HR/DSSS stands for High Rate/Direct Sequence Spread Spectrum, which is another extension of DSSS that supports data rates up to 11 Mbps in the 2.4 GHz band. HT stands for High Throughput, which is a new PHY that supports data rates up to 600 Mbps in both the 2.4 GHz and 5 GHz bands. HT uses OFDM (Orthogonal Frequency Division Multiplexing) as its modulation scheme, but it also supports legacy DSSS and ERP devices by using a dual preamble and header structure that allows backward compatibility.
NEW QUESTION # 171
......
Their abilities are unquestionable, besides, CWNA-109 practice materials are priced reasonably with three kinds. We also have free demo offering the latest catalogue and brief contents for your information, if you do not have thorough understanding of our materials. Many exam candidates build long-term relation with our company on the basis of our high quality CWNA-109 practice materials. So you cannot miss the opportunities this time. So as the most important and indispensable CWNA-109 practice materials in this line, we have confidence in the quality of our CWNA-109 practice materials, and offer all after-sales services for your consideration and acceptance.
CWNA-109 VCE Dumps: https://www.passsureexam.com/CWNA-109-pass4sure-exam-dumps.html
P.S. Free & New CWNA-109 dumps are available on Google Drive shared by PassSureExam: https://drive.google.com/open?id=1NJJ_jhdccOEmomlE-GoKwDTqHqXUmrRN