P.S. Free & New NSE7_FSN_AR-7.6 dumps are available on Google Drive shared by PrepAwayTest: https://drive.google.com/open?id=1Xl5Mbcflt7nNRb42kIr8iIl1BeDgCtzu
The second form is Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) web-based practice test which can be accessed through online browsing. The NSE7_FSN_AR-7.6 web-based practice test is supported by browsers like Firefox, Microsoft Edge, Fortinet Chrome, and Safari. You don't need to install any plugins or software to attempt the NSE7_FSN_AR-7.6 web-based practice test. This online Fortinet NSE7_FSN_AR-7.6 exam is also compatible with all operating systems.
| Section | Objectives |
|---|---|
| Topic 1: Enterprise Firewall | - Routing and VPN
|
| Topic 2: SD-WAN | - Traffic steering
|
>> NSE7_FSN_AR-7.6 Practice Test Fee <<
Perhaps you worry about the quality of our NSE7_FSN_AR-7.6 exam questions. We can make solemn commitment that our NSE7_FSN_AR-7.6 study materials have no mistakes. All contents are passing rigid inspection. You will never find small mistakes such as spelling mistakes and typographical errors in our NSE7_FSN_AR-7.6 learning guide. No one is willing to buy a defective product. And our NSE7_FSN_AR-7.6 practice braindumps are easy to understand for all the candidates.
NEW QUESTION # 154
Refer to the exhibit.
If the default settings are m place, what can you conclude about the conserve mode shown in the exhibit?
Answer: B
Explanation:
The exhibit shows:
* memory conserve mode: on
* memory used: 2706 MB 89% of total RAM
* memory used threshold red: 2675 MB 88% of total RAM
* memory used + freeable threshold extreme: 2887 MB 95% of total RAM
The study guide states that the default thresholds are:
* Extreme = 95%
* Red = 88%
* Green = 82%
So this FortiGate is in conserve mode because memory usage is 89% , which is above the red threshold (88%) , but it has not yet reached the extreme threshold (95%) .
The study guide then explains exactly what happens during conserve mode:
"For traffic that requires proxy-based inspection (and if memory usage has not exceeded the extreme threshold):
config system global
set av-failopen [off | pass | one-shot]
pass (default): All new sessions pass without inspection"
It also says:
"The av-failopen setting also applies to flow-based antivirus inspection." And the same page adds:
"If memory usage exceeds the extreme threshold, all new sessions that require inspection (flow-based or proxy-based) are blocked." Therefore, with default settings and with memory usage below the extreme threshold , FortiGate is allowing new sessions that require inspection, but bypassing inspection . That matches C .
Why the other options are wrong:
* A is wrong because the default behavior is not to block proxy-based inspected sessions; the default is pass , meaning they pass without inspection
* B is wrong because if memory rises another 6% , it reaches 95% , which is the extreme threshold . At that point, the study guide says all new sessions that require inspection are blocked
* D is wrong because FortiGate blocks all new inspected sessions only when memory usage exceeds the extreme threshold , and the exhibit shows it is currently at 89% , not 95%
NEW QUESTION # 155
Refer to the exhibit, which shows the output of diagnose sys session list.
If the HA ID for the primary device is 0, what happens if the primary fails and the secondary becomes the primary?
Answer: C
Explanation:
The decisive session-state flag is synced. Fortinet defines this flag as indicating that the session has been synchronized to the other HA members. The session was created on HA member 0, and a synchronized copy is available to the secondary device.
The FortiOS 7.6 Administrator Study Guide states: "When you enable session synchronization, the new primary can resume communication for sessions after a failover event." It further explains that session pickup allows existing sessions to continue through the newly elected primary with minimal or no interruption.
Therefore, the established TCP session remains usable, and the client does not need to establish a new connection.
The may_dirty flag does not mean that the session is currently dirty. It identifies an allowed session that can be marked dirty later if a firewall-policy, routing, or related configuration change requires re-evaluation. The output does not contain the separate dirty flag. Additionally, app_ntf represents block-notification handling; it does not prove that application control is inspecting the session. The fields app_list=0 and app=0 reinforce this.
The allow_err values are session statistics and do not cause session deletion. Although act=snat and act=dnat confirm NAT, the translation tuples are part of the synchronized session state and do not independently require re-evaluation after FGCP failover.
References: High Availability - Cluster Synchronization and HA Failover, pages 456 and 463; Fortinet: HA session failover; Fortinet: Session-table information.
NEW QUESTION # 156
Refer to the exhibit.
Partial output of the get vpn ipsec tunnel details command is shown. Based on the output, which two statements are correct? (Choose two.)
Answer: C,D
Explanation:
The correct answers are C and D .
The study guide's get vpn ipsec tunnel details example shows:
* replay: enabled
* inbound and outbound sections with separate SPIs
* NPU acceleration: encryption(outbound) decryption(inbound) and it labels these as "Phase 2 SAs for each direction" and "Hardware acceleration" This directly proves D. Anti-replay is enabled , because the output explicitly says replay: enabled For the NPU status, the study guide explains the exact npu_flag meanings:
* npu_flag=00 = both IPsec SAs loaded to the kernel
* npu_flag=01 = outbound IPsec SA copied to NPU
* npu_flag=02 = inbound IPsec SA copied to NPU
* npu_flag=03 = both outbound and inbound IPsec SAs copied to NPU
Because the exhibit shows hardware acceleration in both directions - encryption(outbound) and decryption(inbound) - the matching npu_flag is 03 , not 02. That makes C correct and A incorrect.
Why B is wrong:
The same study guide output labels the tunnel as having Phase 2 SAs for each direction , so different inbound and outbound SPIs are normal for the two SAs. Also, the FortiOS administration guide explains that auto-negotiate controls whether phase 2 SA negotiation is initiated automatically, not whether inbound and outbound SPIs are different: "By default the phase 2 security association (SA) is not negotiated until a peer attempts to send data... Auto-negotiate initiates the phase 2 SA negotiation automatically..." So the verified answers are: C, D .
NEW QUESTION # 157
Refer to the exhibits.
The system administrator settings configured on the root FortiGate and the Security Fabric settings configured on a downstream FortiGate are shown.
When prompted to sign in with Security Fabric to the downstream FortiGate, a user enters the single sign-on (SSO) provider credentials.
What happens next for the user?
Answer: A
Explanation:
The Enterprise Firewall 7.6 Administrator Study Guide explains: "The root FortiGate acts as the identity provider (IdP) and you configure the other devices as service providers (SP)." Therefore, the root FortiGate authenticates the credentials for the AdminSSO administrator, while the downstream FortiGate operates as the SAML service provider.
After successful authentication, the root FortiGate returns a SAML assertion to the downstream FortiGate.
The downstream device then grants access according to its configured SAML administrator profile. The exhibit shows that its Default admin profile is super_admin_readonly. Consequently, the user is logged in to the downstream FortiGate with read-only super-administrator privileges.
The browser can be redirected temporarily to the root FortiGate for identity-provider authentication, but that is not the final access outcome, so option A is incomplete. AdminSSO is the administrator account name, not an access profile, and the user is not left on the root FortiGate, eliminating option C. Because the credentials are successfully authenticated, option D is also incorrect.
References: Enterprise Firewall 7.6 Administrator Study Guide, Security Fabric - Use Case 4: Security Fabric with SAML SSO, page 266; FortiOS 7.6 - Configuring a downstream FortiGate as an SP; FortiOS 7.6 - SSO administrators.
NEW QUESTION # 158
Refer to the exhibit, which shows a truncated output of a real-time LDAP debug.
What two conclusions can you draw from the output? (Choose two.)
Answer: A,B
Explanation:
The exhibit shows these key lines:
* handle_req-Rcvd auth req ... for jsmith in Lab
* start_search_dn-base: ' DC=TAC,DC=ottawa,DC=fortinet,DC=com ' filter:sAMAccountName=jsmith
* get_all_dn-Found DN 1:CN=John Smith,CN=Users,DC=TAC,DC=ottawa,DC=fortinet,DC=com The study guide explicitly shows the same LDAP real-time debug pattern and says the request line includes the LDAP server object name:
handle_req-Rcvd auth req ... for jsmith in Lab ...
That supports A : Lab is the configured LDAP server name being used for this authentication request.
For the LDAP flow stage, the study guide states:
"An fnbamd_ldap_build_dn_search_req-base message indicates that FortiGate is performing step two:
searching for the user in the LDAP tree." It also says that if the LDAP server finds the user, the output shows the user's full DN.
That matches the exhibit's start_search_dn-base ... filter:sAMAccountName=jsmith and Found DN ...
CN=John Smith... lines, so D is correct.
Why the other options are wrong:
* B is wrong because the exhibit shows FortiOS has found the user DN CN=John Smith,..., but that does not mean the user is already authenticating with that DN in this step. The study guide says this DN is discovered in step 2 , and only in step 3 does FortiGate bind using the user DN.
* C is wrong because the exhibit is showing step 2 (Search Request) , not step 3 (Bind Request) . The study guide separates these steps clearly and shows step 3 with fnbamd_ldap_build_userbind_req- Trying DN ... and __ldap_build_bind_req-Binding to ' CN=John Smith,... '
NEW QUESTION # 159
......
If you still worry too much about purchasing professional NSE7_FSN_AR-7.6 test guide on the internet, I can tell that it is quite normal. Useful certification NSE7_FSN_AR-7.6 guide materials will help your preparing half work with double results. If you consider about our NSE7_FSN_AR-7.6 exam questoins quality, you can free downlaod the demo of our NSE7_FSN_AR-7.6 Exam Questions. We have thought of your needs and doubts considerately on the NSE7_FSN_AR-7.6 study guide. Our certification NSE7_FSN_AR-7.6 guide materials are collected and compiled by experience experts who have worked in this line more than 10 years.
NSE7_FSN_AR-7.6 Dumps Download: https://www.prepawaytest.com/Fortinet/NSE7_FSN_AR-7.6-practice-exam-dumps.html
P.S. Free & New NSE7_FSN_AR-7.6 dumps are available on Google Drive shared by PrepAwayTest: https://drive.google.com/open?id=1Xl5Mbcflt7nNRb42kIr8iIl1BeDgCtzu