BONUS!!! Download part of Dumpexams JN0-364 dumps for free: https://drive.google.com/open?id=1qiqsKA9xCIiJJMYNh9uzn0YWM6ojG8dt
We have technicians to check the website every day, and therefore if you choose us, you can enjoy a safe online shopping environment. In addition, JN0-364 exam materials are compiled and verified by professional specialists, and therefore the questions and answers are valid and correct. JN0-364 learning materials cover most of knowledge points for the exam, and you can master them as well as improve your professional ability in the process of learning. You can receive the download link and password within ten minutes after paying for JN0-364 Exam Dumps, if you don’t receive, you can contact us, and we will solve this problem for you.
| Section | Weight | Objectives |
|---|---|---|
| IPv6 | 8-12% | - Static and dynamic routing - OSPFv3 and BGP for IPv6 - Address types and format - Autoconfiguration |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Labels and LIB - Segment routing basics - Configuration and monitoring - LDP and RSVP - Terminology and forwarding |
| Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Spanning Tree Protocols | 8-12% | - STP, RSTP, MSTP, VSTP - Port roles and states - BPDU and protection features - Configuration and convergence |
| Open Shortest Path First (OSPF) | 15-20% | - Areas and router types - Link-state database - Configuration and troubleshooting - LSA types and operation |
| Protocol-Independent Routing | 10-15% | - Load balancing - Routing instances and RIB groups - Static, aggregate, and generated routes - Filter-based forwarding - Martian addresses |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - Metrics and wide metrics - Configuration and monitoring - PDUs and TLVs - Adjacencies and levels |
| Layer 2 Bridging and VLANs | 8-12% | - Service provider switching features - Bridging concepts - VLANs and trunking |
| Border Gateway Protocol (BGP) | 20-25% | - Policy and route filtering - IBGP and EBGP - Basic operation and message types - Configuration and troubleshooting - Path selection and attributes |
| High Availability | 5-8% | - Nonstop active routing - NSR and GRES concepts - Graceful restart |
>> JN0-364 Best Preparation Materials <<
Dumpexams offers Juniper JN0-364 practice tests for the evaluation of Service Provider Routing and Switching, Specialist (JNCIS-SP) exam preparation. Juniper JN0-364 practice test is compatible with all operating systems, including iOS, Mac, and Windows. Because this is a browser-based JN0-364 Practice Test, there is no need for installation.
NEW QUESTION # 66
Which two statements are correct about TLVs in IS-IS? (Choose two.)
Answer: B,C
Explanation:
In the IS-IS protocol,TLVs (Type, Length, Value)are the fundamental building blocks used to carry information withinLink-State PDUs (LSPs). Unlike some other protocols that have a fixed, rigid packet format, IS-IS was designed from the ground up to be modular and extensible. This extensibility is achieved through the use of TLVs, which allow the protocol to carry different types of data without requiring changes to the core protocol state machine.
According to Juniper Networks technical documentation,TLVs allow flexible encoding of routing information (Option C). Each TLV specifies the "Type" of information it carries (such as neighbor information or IP reachability), the "Length" of that information, and the "Value" (the actual data). This architecture is what allowed IS-IS to easily support IPv6 by simply adding new TLVs (like TLV 236 for IPv6 reachability) without redesigning the protocol. It also supports Traffic Engineering (TE) extensions used in MPLS environments by adding TLVs that describe link bandwidth and administrative groups.
Furthermore, a singleLSP can contain multiple TLVs (Option D). When a Juniper router generates an LSP, it packs all the necessary information-such as the router's area addresses, its neighbors, and its local interface prefixes-into various TLVs and places them into a single PDU. If the amount of information exceeds the Maximum Transmission Unit (MTU) of the interface, the router will generate additional LSPs (fragmented LSPs) to carry the remaining TLVs.
Options A and B are incorrect because restricting an LSP to a single TLV would make the protocol incredibly inefficient, and the very nature of IS-IS is its ability to support multiple network layer protocols (not just IPv4) through its agnostic TLV-based transport.
NEW QUESTION # 67
Exhibit:
You have configured IPv4 and IPv6 in your network and all OSPF neighbors are established. You apply the configuration shown in the exhibit. Which statement is true in this scenario?
Answer: D
Explanation:
In a Juniper Networks environment running Junos OS, understanding the interaction between different versions of OSPF is essential for multi-protocol environments.OSPFv2(defined in RFC 2328) is the standard protocol used for routing IPv4 unicast traffic.OSPFv3(defined in RFC 5340) was originally developed to support IPv6 routing. However, OSPFv3 was later extended via RFC 5838 to support multiple address families (AF), allowing it to carry IPv4 unicast, IPv4 multicast, and other address types within a single OSPF instance.
According to Juniper technical documentation, Junos OS implements this multi-AF support in OSPFv3 through the use ofrealms. When the realm ipv4-unicast statement is configured under the [edit protocols ospf3] hierarchy, the OSPFv3 process becomes capable of calculating and advertising IPv4 routes.
In the provided exhibit, routerR2has a dual-protocol configuration. First, it is running standard OSPFv2, with the ge-0/0/1.0 interface (which is directly connected to the 172.16.2.0/24 network) participating in Area 0.
This ensures that the prefix is advertised as a standard IPv4 LSA to its neighbor,R1. Second, R2 is running OSPFv3 with the realm ipv4-unicast specifically enabled on that same ge-0/0/1.0 interface. Because of this realm, OSPFv3 also treats the 172.16.2.0/24 prefix as a reachable IPv4 destination and advertises it to R1 as an OSPFv3 IPv4-unicast LSA.
As a result, whenR1(which is also running both protocols) receives these routing updates, it will see the same destination prefix advertised by two different protocols. Its routing table (inet.0) will contain one entry learned from the OSPFv2 process and a second, separate entry learned from the OSPFv3 process. While the Junos Routing Engine will ultimately select one as the "active" route based on route preference (both protocols have a default preference of 10), both entries will technically exist within the Routing Information Base (RIB). This confirms that statementBis the correct description of the operational state of the network.
=========
NEW QUESTION # 68
Which LSA type does an OSPF ABR use to advertise external routes generated by an NSSAASBR into the backbone?
Answer: B
Explanation:
In OSPF, an Area Border Router (ABR) that connects to a Not-So-Stubby Area (NSSA) will convert the Type 7 LSAs generated by an NSSA Autonomous System Boundary Router (ASBR) into Type 5 LSAs to advertise them into the OSPF backbone area (Area 0). Type 7 LSAs are specific to NSSAs and are used to advertise external routes within the NSSA.
NEW QUESTION # 69
For two or more switches to participate in the same MSTP region, which parameter must match?
Answer: B
Explanation:
For switches to participate in the same MSTP region, the MST region configuration must match across the devices. One of the required matching parameters is the region name, which identifies the MSTP region and ensures the switches treat each other as part of the same spanning-tree region.
NEW QUESTION # 70
Referring to the exhibit. You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses. Which two tasks will accomplish your objective? (Choose two.)
Answer: B,D
Explanation:
To configure OSPFv3 (the version of OSPF that supports IPv6), you would use the set protocols ospf3 command with the appropriate area and interface. OSPFv3 requires a 32-bit router ID just like OSPFv2, which is typically an IPv4 address. OSPF does not use a 128-bit router ID, so answer D is incorrect.
NEW QUESTION # 71
......
After the advent of the Dumpexams's latest Juniper certification JN0-364 exam practice questions and answers, passing Juniper certification JN0-364 exam is no longer a dream of the IT staff. All of Dumpexams's practice questions and answers about Juniper Certification JN0-364 Exam have high quality and 95% similarity with the real exam questions. Dumpexams is worthful to choose. If you choose Dumpexams's products, you will be well prepared for Juniper certification JN0-364 exam and then successfully pass the exam.
Download JN0-364 Fee: https://www.dumpexams.com/JN0-364-real-answers.html
2026 Latest Dumpexams JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1qiqsKA9xCIiJJMYNh9uzn0YWM6ojG8dt