300-110 practice exam will provide you with wholehearted service throughout your entire learning process. This means that unlike other products, the end of your payment means the end of the entire transaction our Cisco 300-110 Learning Materials will provide you with perfect services until you have successfully passed the Designing Cisco Wireless Networks 300-110 exam.
| Section | Objectives |
|---|---|
| Topic 1: RF Fundamentals and Design Principles | - Channel planning and interference mitigation - RF behavior and propagation - Antenna types and placement strategies |
| Topic 2: High Availability and Performance Optimization | - Load balancing and RF optimization - Redundancy design for controllers and APs |
| Topic 3: Wireless Site Survey and Requirements Analysis | - Physical environment assessment and constraints - Coverage and capacity planning - Business and technical requirements gathering |
| Topic 4: Troubleshooting and Validation | - Wireless performance troubleshooting methodologies - Validation tools and post-deployment testing |
| Topic 5: Wireless Security Design | - WPA2/WPA3 enterprise security design - 802.1X authentication and RADIUS integration - Guest access and segmentation strategies |
| Topic 6: Cisco Wireless Architecture | - Mobility groups and roaming design - Lightweight Access Point (LAP) deployment models - Controller-based architecture (WLC) |
Without doubt, our 300-110 practice dumps keep up with the latest information and contain the most valued key points that will show up in the real 300-110 exam. Meanwhile, we can give you accurate and instant suggestion for our customer services know every detail of our 300-110 Exam Questions. And they are pleased to give guide for 24 hours online. You can get assistant by them as long as you made your inquire.
NEW QUESTION # 72
A network engineer must review the design for a Cisco wireless deployment at a hospital. The deployment will have two Cisco 9800 WLCs configured with SSO, one Cisco 9800 WLC joined to the SSO controllers using a mobility tunnel, and one Cisco 9800 WLC that will be used as a service/dev controller and not joined using a mobility tunnel. Which high availability option must be incorporated in the design to ensure that APs choose the service/dev controller last when trying to associate?
Answer: D
Explanation:
In Cisco ' s AP controller preference hierarchy, each AP can be configured with a primary, secondary, and tertiary controller designation. The AP will attempt to join controllers in this exact order: primary first, secondary second, and tertiary third. When no controllers from the preference list are available, the AP may fall back to any reachable controller through standard CAPWAP discovery. In this hospital deployment, the service/development controller must be the controller of last resort - it should only receive AP associations when all other options are exhausted. Configuring the service/dev controller as the tertiary controller in the APs ' preference configuration ensures exactly this behavior: APs will attempt the SSO pair (primary) first, then the third production WLC joined via mobility tunnel (secondary), and only then the service/dev controller (tertiary). This prevents development traffic from disrupting production service, and ensures production APs do not inadvertently join the service environment during partial outages. Configuring it as primary (Option A) or secondary (Option C) would allow APs to join the service controller before exhausting production options. AP failover priority (Option D) governs which APs are processed during controller recovery, not the controller preference order during join. Reference: WLSD Study Guide - AP Controller Preference Configuration, Primary/Secondary/Tertiary WLC Assignment, Hospital WLAN High Availability Design.
NEW QUESTION # 73
A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?
Answer: C
Explanation:
The requirement for users to retain their session state and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco's wireless architecture, IP address preservation across controller boundaries is achieved through inter- controller mobility -- specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client's traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires a mobility tunnel between WLC-A and WLC-B with both controllers configured in the same mobility group name -- the group name is the trust identifier that permits the mobility tunnel and anchor- foreign relationship to form. Without the same group name, the controllers will not form a trusted mobility peer relationship.
NEW QUESTION # 74
A network engineer must review the design for a Cisco wireless deployment at a hospital. The deployment will have two Cisco 9800 WLCs configured with SSO, one Cisco 9800 WLC joined to the SSO controllers using a mobility tunnel, and one Cisco 9800 WLC that will be used as a service/dev controller and not joined using a mobility tunnel. Which high availability option must be incorporated in the design to ensure that APs choose the service/dev controller last when trying to associate?
Answer: D
Explanation:
In Cisco's AP controller preference hierarchy, each AP can be configured with a primary, secondary, and tertiary controller designation. The AP will attempt to join controllers in this exact order: primary first, secondary second, and tertiary third. When no controllers from the preference list are available, the AP may fall back to any reachable controller through standard CAPWAP discovery. In this hospital deployment, the service/development controller must be the controller of last resort -- it should only receive AP associations when all other options are exhausted.
Configuring the service/dev controller as the tertiary controller in the APs' preference configuration ensures exactly this behavior:
APs will attempt the SSO pair (primary) first, then the third production WLC joined via mobility tunnel (secondary), and only then the service/dev controller (tertiary). This prevents development traffic from disrupting production service, and ensures production APs do not inadvertently join the service environment during partial outages.
NEW QUESTION # 75
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?
Answer: D
Explanation:
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity -- it must remain in Client Serving mode to maintain uninterrupted 5 GHz WLAN service. The XOR radio (slot 0), currently either idle or operating as a secondary 5 GHz radio, can be repurposed without impacting client service. Setting the XOR radio to Monitor mode enables it to continuously scan all channels across both the 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. In Monitor mode, the XOR radio operates full-time as a dedicated scanner, providing rogue detection coverage on 2.4 GHz (previously uncovered since all services were 5 GHz) and supplementary scanning on 5 GHz.
This eliminates the need for additional dedicated monitor mode APs.
NEW QUESTION # 76
A small customer has a legacy autonomous mode Wi-Fi deployment that provides a low-density and low- capacity service. The customer wants to update and replace this deployment with the latest Wi-Fi technology but has a fixed budget that will pay only to replace the APs. Which architectural controller deployment model suits this requirement?
Answer: D
Explanation:
Cisco ' s Embedded Wireless Controller (EWC) architecture is the ideal solution for small deployments with strict budget constraints where only the access points can be replaced. EWC is a controller function that runs directly within the Cisco Catalyst 9100 Series access point itself - eliminating the need for a dedicated physical or virtual WLC appliance. The APs serve dual roles as both the wireless radio infrastructure and the controller platform. The unified model (Option B) requires a dedicated hardware WLC such as the 9800 series, exceeding the customer ' s budget. Fabric (Option C) requires Cisco DNA Center and SD-Access infrastructure, making it cost-prohibitive for a small deployment. Cloud (Option D) requires ongoing subscription fees that may not fit a fixed one-time budget. EWC provides enterprise-grade features including centralized SSID management, RRM, and client mobility within the AP cluster - all without additional controller hardware investment. This makes it the canonical solution for SMB migrations from autonomous deployments. Reference: WLSD Study Guide - Controller Deployment Models, Embedded Wireless Controller Architecture, SMB and Branch Wireless Design.
NEW QUESTION # 77
......
Additionally, students can take multiple Cisco 300-110 exam questions, helping them to check and improve their performance. Three formats are prepared in such a way that by using them, candidates will feel confident and crack the Designing Cisco Wireless Networks (300-110) actual exam. These three formats suit different preparation styles of 300-110 test takers.
Latest 300-110 Test Report: https://www.braindumpspass.com/Cisco/300-110-practice-exam-dumps.html