If you face any hitch while using the Microsoft AZ-802 practice exam software of Exam4Labs, contact our customer support. Our team is available for the assistance of Microsoft AZ-802 updated exam dumps users. Many candidates of the AZ-802 examination pay extra money because Microsoft weaks the content of the test.
| Section | Objectives |
|---|---|
| Secure and manage Windows Server environments | - Security and compliance
|
| Networking and high availability | - Networking infrastructure
|
| Hybrid infrastructure management | - Azure integration
|
| Compute, storage, and virtualization | - Virtual machines and containers
|
>> Reliable AZ-802 Test Notes <<
In informative level, we should be more efficient. In order to take the initiative, we need to have a strong ability to support the job search. And how to get the test AZ-802 certification in a short time, which determines enough AZ-802 qualification certificates to test our learning ability and application level. Our AZ-802 Exam Questions are specially designed to meet this demand for our worthy customers. As long as you study with our AZ-802 learning guide, you will pass the exam and get the certification for sure.
NEW QUESTION # 34
Your network contains the segments shown in the following table.
You have servers that run Windows Server and are configured as shown in the following table.
You deploy a server named Server4 that runs Windows Server and has a static IP address of 172.16.1.1. You connect Server4 to Segment1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Server1 can successfully ping Server2 by using the name of Server2: No. Server2 can successfully ping Server3 by using the IP address of Server3: No. Running ipconfig /all on Server4 will display an IP address from the 169.254.0.0/16 IPv4 address space: No.
A host decides whether a destination is local by comparing the destination IP against its own subnet mask; if the destination falls outside its own subnet, the host forwards through its default gateway, and if within its own subnet, it uses ARP directly on the local segment. Server2 is physically cabled to Segment1 but has been configured with an IP address (172.16.2.2/24) that places it in the 172.16.2.0/24 network -- a subnet that is physically Segment2. When Server1 (172.16.1.10/24) resolves and pings Server2 ' s name, it gets back
172.16.2.2, which Server1 treats as a remote address (outside its own 172.16.1.0/24) and forwards to its gateway, 172.16.1.1; the router then forwards toward the 172.16.2.0/24 network (physically Segment2), where Server2 is not actually present, so the ping fails. Likewise, when Server2 (believing itself to be on
172.16.2.0/24) tries to reach Server3 (172.16.2.20), it thinks the destination is local and issues an ARP request on the wire it ' s actually attached to (Segment1); ARP requests never cross a router, so the request never reaches Server3 (physically on Segment2), and the ping fails. Server4 was given a static IP address (172.16.1.1); APIPA (169.254.0.0/16) is assigned only to interfaces configured for automatic (DHCP) addressing when no DHCP server responds -- a statically configured interface never receives an APIPA address regardless of any conflict, so ipconfig /all on Server4 will show its configured static address,
172.16.1.1 (which incidentally also collides with Segment1 ' s gateway address, a separate misconfiguration), not an APIPA address.
NEW QUESTION # 35
You have an Azure subscription. The subscription contains a Microsoft Sentinel workspace named Workspace1 and 100 virtual machines that run Windows Server. You configure Workspace1 to collect logs from the virtual machines. You need to query the collected logs for failed logon events. Which table should you query?
Answer: D
Explanation:
When Windows Server virtual machines send Windows Security event log data into a Log Analytics
/Microsoft Sentinel workspace, those events (including failed logon Event ID 4625) land in the SecurityEvent table. SigninLogs and AuditLogs hold Microsoft Entra ID sign-in and directory audit data rather than Windows OS security log events, and SecurityIncident stores Sentinel incidents created from analytics rules rather than raw event data, so querying failed logons directly requires the SecurityEvent table. A query such as SecurityEvent | where EventID == 4625 against Workspace1 would return the failed logon attempts recorded on the monitored virtual machines. This table is populated when the Log Analytics agent or Azure Monitor Agent is configured, via a data collection rule, to collect Windows Security events, and it is also the table that Microsoft Sentinel analytics rules typically reference when building failed-logon or brute-force detection logic. The SecurityEvent schema also carries the account name, source workstation, and logon type for each event, letting an analyst pivot from raw failed-logon counts to identifying which accounts or source hosts are the target of a credential-guessing attempt across the 100 monitored servers.
NEW QUESTION # 36
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and east.contoso.com and the servers shown in the following table. DC1: contoso.com, Domain controller Server1: contoso.com, Member server DC2: east.contoso.com, Domain controller Server2: east.contoso.com, Member server Contoso.com contains a user named User1. You add User1 to the built-in Backup Operators group in contoso.com. Which servers can User1 back up?
Server/domain table
Answer: A
Explanation:
The built-in Backup Operators group is a domain local security group that exists separately in every domain of a forest; membership in contoso.com ' s Backup Operators group has no effect outside that domain. The backup/restore user rights that Backup Operators grants (SeBackupPrivilege and SeRestorePrivilege) are assigned through the Default Domain Controllers Policy GPO, which links only to the Domain Controllers OU within contoso.com -- so those rights apply only to DC1, the domain controller of contoso.com. Backup Operators membership in contoso.com does not grant any rights on Server1, because Server1 is a member server, not a domain controller, and the Default Domain Controllers Policy does not apply to member servers; a member server ' s local Backup Operators group (or local security policy) would need to be configured separately for that server. It also grants no rights on DC2 or Server2 in east.contoso.com, because Backup Operators group membership and its associated GPO-derived rights are scoped entirely to the domain in which the group exists (contoso.com) and do not extend across a parent/child domain trust boundary to another domain ' s domain controllers or member servers, even within the same forest. Therefore, adding User1 to contoso.com ' s Backup Operators group allows User1 to back up only DC1 -- the sole domain controller governed by the Default Domain Controllers Policy of that same domain.
NEW QUESTION # 37
You have an Azure subscription. The subscription contains a virtual machine named VM1 that runs Windows Server. The subscription contains the storage accounts shown in the following table: storage1 (Standard, GRS), storage2 (Standard, ZRS), storage3 (Premium, Block blobs, LRS), storage4 (Premium, File shares, LRS). You plan to enable boot diagnostics for VM1. You need to configure storage for the boot diagnostics logs and snapshots. Which storage account should you use?
Storage accounts table
Answer: B
Explanation:
The storage account used for Azure virtual machine boot diagnostics must be a standard-performance-tier account, since Microsoft documents that attempting to use a premium storage account for boot diagnostics returns a StorageAccountTypeNotSupported error when the virtual machine is started, and it also cannot use zone-redundant storage, since ZRS is likewise unsupported for this specific resource and produces the same class of error. Looking at the four accounts in the table, storage3 and storage4 are both Premium-tier accounts, which immediately rules both of them out regardless of their redundancy setting, and storage2, despite being Standard tier, uses zone-redundant storage, which independently rules it out as well. That leaves storage1, which is both Standard performance tier and uses geo-redundant storage rather than zone-redundant storage, satisfying both documented requirements simultaneously. Because storage1 is the only one of the four accounts that avoids both the premium-tier restriction and the ZRS restriction at the same time, it is the only valid choice among the options offered for configuring VM1 ' s boot diagnostics storage.
NEW QUESTION # 38
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. You implement a central store. You create a new Group Policy Object (GPO) named GPO1. When you attempt to edit GPO1, you see that the " Administrative Templates: Policy definitions (ADMX files) retrieved from the central store " node shows only two settings (far fewer than the normal full set of Administrative Template settings). You need to ensure that all settings are available. Solution: You modify the properties of GPO1.
Does this meet the goal?
Answer: B
Explanation:
The root cause of this symptom is that the Central Store ' s PolicyDefinitions folder is missing the full default set of Windows ADMX/ADML administrative template files -- it currently contains only a couple of custom (ActiveX-related) template files. This is entirely a matter of which ADMX/ADML files physically exist in the Central Store; it has nothing to do with GPO1 as an object. Modifying GPO1 ' s own properties -- its GPO status, link enforcement, security filtering, WMI filtering, or any of the other properties exposed on a GPO -- does not add, remove, or change any ADMX/ADML file, and therefore cannot cause the Group Policy Management Editor to display any additional Administrative Template settings that aren ' t already present as files in the Central Store. The Administrative Templates settings displayed when editing any GPO are sourced purely from whatever ADMX files exist in the Central Store (once one exists) -- this is a property of the store itself, shared identically across every GPO edited from a machine pointed at that store, not a per-GPO setting that can be toggled via GPO1 ' s own properties. Because the actual fix requires adding the missing ADMX
/ADML files to the Central Store, and modifying GPO1 ' s properties does not touch the Central Store ' s contents at all, this solution does not meet the goal.
NEW QUESTION # 39
......
Exam4Labs's Microsoft AZ-802 web-based and desktop practice tests provide you with an Microsoft actual test scenario, allowing you to experience the AZ-802 final test conditions. Customizable Microsoft AZ-802 Practice Tests (desktop and web-based) allow you to change the time and quantity of Microsoft AZ-802 practice questions.
AZ-802 Latest Braindumps Pdf: https://www.exam4labs.com/AZ-802-practice-torrent.html