P.S. Free & New H19-404_V1.0 dumps are available on Google Drive shared by Test4Cram: https://drive.google.com/open?id=1k1QXJKKcESKPgCxqiKpzxRsCBI_Mphun
As the labor market becomes more competitive, a lot of people, of course including students, company employees, etc., and all want to get H19-404_V1.0 authentication in a very short time, this has developed into an inevitable trend. Each of them is eager to have a strong proof to highlight their abilities, so they have the opportunity to change their current status, including getting a better job, have higher pay, and get a higher quality of material, etc. It is not easy to qualify for a qualifying exam in such a short period of time. Our company's H19-404_V1.0 learning material is very good at helping customers pass the exam and obtain a certificate in a short time, and now I'm going to show you our H19-404_V1.0 Learning materials.
| Section | Objectives |
|---|---|
| Topic 1: Huawei Campus Network Solutions | - iMaster NCE-Campus management platform - CloudCampus solution architecture |
| Topic 2: Switching and Routing in Campus Networks | - VLAN and segmentation design - Layer 2 and Layer 3 design principles |
| Topic 3: WLAN Planning and Design | - Capacity and performance design considerations - Wireless coverage planning |
| Topic 4: Presales Solution Design | - Solution proposal and design methodology - Customer requirement analysis |
| Topic 5: Campus Network Fundamentals | - Enterprise campus network architecture principles - Typical campus network deployment models |
| Topic 6: Network Security Design | - Access control strategies - Campus security architecture considerations |
>> H19-404_V1.0 Practice Questions <<
After purchasing the H19-404_V1.0 exam dumps from Test4Cram, you will have access to three formats designed by Test4Cram for the preparation of the Huawei H19-404_V1.0 exam. These HCSE-Presales-Campus Network Planning and Design V1.0 exam dumps formats will provide actual Huawei H19-404_V1.0 PDF Questions to help you prepare for the Huawei H19-404_V1.0 exam.
NEW QUESTION # 33
Which of the following wireless security standards was proposed by China?
Answer: D
Explanation:
WAPI, or WLAN Authentication and Privacy Infrastructure, is the wireless LAN security standard proposed by China. It provides wireless link authentication and data-protection mechanisms and was developed as an alternative security framework for WLAN environments. Huawei's training material explicitly identifies WAPI as a WLAN security standard proposed in China and states that it provides stronger protection than legacy WEP and WPA mechanisms.
WPA, WPA2, and WPA3 belong to the Wi-Fi Protected Access family maintained through Wi-Fi industry certification. WPA was introduced as an interim improvement over WEP. WPA2 adopted stronger IEEE
802.11i security mechanisms, including AES-based CCMP. WPA3 later introduced stronger password- authentication and enterprise-security options.
WAPI incorporates authentication and encryption as part of an integrated wireless security architecture. Its deployment depends on regional requirements, terminal compatibility, AP support, and the organization's regulatory or cryptographic-policy obligations. The question asks which standard originated as a Chinese wireless security standard, not which standard is most widely deployed internationally. Therefore, WAPI is the only correct choice, making option B the verified answer.
NEW QUESTION # 34
Which of the following statements is true about MACsec?
Answer: A
Explanation:
Hardware-based encryption is the unambiguously correct statement. MACsec protects Ethernet frames at Layer 2 using AES-GCM-based authenticated encryption. On enterprise switches and routers, the encryption and integrity operations are commonly implemented in forwarding ASICs or dedicated hardware so that frames can be protected at high throughput with low latency.
Option A is incorrect because complex manual configuration is not an inherent requirement. MACsec can use manually configured connectivity-association keys, but IEEE 802.1X MACsec Key Agreement can automate peer authentication, secure-channel establishment, key distribution, and rekeying. The operational complexity therefore depends on the deployment model and management platform.
Option C is also inaccurate. MACsec is media-independent, meaning it can operate over supported copper or fiber Ethernet; however, it does not eliminate the requirement for appropriate Layer 2 connectivity between participating MACsec entities. Standard hop-by-hop MACsec protects Ethernet links or LAN connectivity between peers and is not a general Layer 3 tunneling mechanism.
MACsec supplies Layer 2 confidentiality, integrity, origin authentication, and replay protection. Its encryption can be performed directly in network-device hardware, enabling substantially better forwarding performance than software-only encryption implementations.
NEW QUESTION # 35
Which of the following statements are true about wireless traffic forwarding modes on a fabric wireless network?
Answer: A,B,C,D
Explanation:
All four statements correctly describe the trade-offs between direct and tunnel forwarding. With direct forwarding, an AP sends service traffic directly to the upstream network rather than encapsulating it in a CAPWAP data tunnel to the WAC. This eliminates unnecessary detours, avoids creating a WAC bandwidth bottleneck, reduces WAC load, and generally provides higher forwarding efficiency.
However, on a fabric network, Layer 3 roaming across different edge nodes may require the original edge or another designated device to remain the home agent. The resulting forwarding path and state synchronization can slightly affect roaming performance, making direct forwarding less suitable for extremely roaming- sensitive deployments. Huawei's material explains that after Layer 3 roaming in direct-forwarding mode, traffic may continue to be forwarded through the home agent.
Tunnel forwarding sends AP service traffic through CAPWAP tunnels to the WAC. This simplifies centralized policy enforcement, security control, and traffic management. Its disadvantage is that all wireless traffic may detour through the WAC, increasing forwarding pressure and potentially creating a performance bottleneck.
NEW QUESTION # 36
Which of the following are WAN interconnection models for multi-branch campus networks?
Answer: A,B,C
Explanation:
Huawei SD-WAN supports full-mesh, hub-spoke, and partial-mesh interconnection models. In a full-mesh topology, every site can communicate directly with the other sites. This model minimizes intermediate forwarding and is appropriate when branches frequently exchange latency-sensitive traffic such as voice, video, or collaborative application data.
In a hub-spoke topology, branch sites communicate with a central headquarters or data-center hub. Branch-to- branch traffic normally traverses that hub. The model is simple, scalable, and suitable for enterprises whose applications and shared resources are concentrated at headquarters.
Partial-mesh is used when most sites can communicate directly but some sites lack direct underlay connectivity or do not require direct tunnels. Those sites can communicate through a redirect or intermediate site. Huawei describes full-mesh, hub-spoke, and partial-mesh as supported topology designs and explains the role of a redirect site in partial-mesh networking.
"Partial-spoke" is not a defined SD-WAN topology model. A spoke is a role within hub-spoke networking rather than an independent partial-spoke topology. Therefore, A, B, and D are correct.
NEW QUESTION # 37
Huawei provides an innovative technology that can maintain smooth video when traffic packet loss between enterprise branches reaches up to 20%. Which technology provides this capability?
Answer: D
Explanation:
A-FEC, or Adaptive Forward Error Correction, is the correct technology. It protects delay-sensitive traffic by adding calculated redundant packets to the original packet stream. If some original packets are lost during WAN transmission, the receiving edge device can reconstruct them using the surviving original and redundant packets rather than waiting for end-to-end retransmission.
The key distinction between ordinary FEC and A-FEC is adaptation. With A-FEC, the receiving device reports real-time packet-loss and continuous-loss information to the transmitting device through FEC acknowledgement messages. The transmitting edge then dynamically increases or decreases the redundancy ratio according to actual network conditions. This provides stronger recovery during severe loss while avoiding unnecessary bandwidth overhead when link quality improves. Huawei describes this feedback- controlled adjustment as a mechanism that can alleviate or eliminate the impact of packet loss.
IFIT and IPCA are primarily measurement and service-quality analysis technologies; they do not reconstruct lost video packets. Fixed FEC does not adapt its redundancy level as effectively to changing loss conditions.
Therefore, the technology intended for smooth video under packet loss of up to 20% is A-FEC.
NEW QUESTION # 38
......
We provide varied functions to help the learners learn our H19-404_V1.0 study materials and prepare for the exam. The self-learning and self-evaluation functions of our H19-404_V1.0 exam questions help the learners check their learning results and the statistics and report functions help the learners find their weak links and improve them promptly. And you will be more confident as you know the inform of the H19-404_V1.0 Exam and the questions and answers.
Test H19-404_V1.0 Assessment: https://www.test4cram.com/H19-404_V1.0_real-exam-dumps.html
DOWNLOAD the newest Test4Cram H19-404_V1.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1k1QXJKKcESKPgCxqiKpzxRsCBI_Mphun