DOWNLOAD the newest PrepAwayETE 93-Tall-Mass-Timber-Buildings PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1tpub51JqMz592Bu1HJdzy2SPhuSvOATd
The certification of International Code Council 93-Tall-Mass-Timber-Buildings exam is what IT people want to get. Because it relates to their future fate. International Code Council 93-Tall-Mass-Timber-Buildings exam training materials are the learning materials that each candidate must have. With this materials, the candidates will have the confidence to take the exam. Training materials in the PrepAwayETE are the best training materials for the candidates. With PrepAwayETE's International Code Council 93-Tall-Mass-Timber-Buildings Exam Training materials, you will pass the exam easily.
| Section | Objectives |
|---|---|
| Topic 1: Tall Mass Timber Building Code Provisions | - Applicable Codes and References
- Fire Safety and Fire Resistance
|
>> International Code Council 93-Tall-Mass-Timber-Buildings Trustworthy Exam Torrent <<
For candidates who are going to buy 93-Tall-Mass-Timber-Buildings training materials online, they may pay much attention to the quality of the exam dumps, since it will depend on whether they may pass the exam or not. 93-Tall-Mass-Timber-Buildings exam braindumps of us are reviewed by experienced specialists, therefore the quality can be guaranteed. They also check 93-Tall-Mass-Timber-Buildings Training Materials at times to ensure the timely update. Moreover, we offer you free demo to have a try, and you can have a try before buying. You will know the mode of the complete version of the 93-Tall-Mass-Timber-Buildings exam dumps.
NEW QUESTION # 15
Proprietary nails can be used by referencing which ICC-ES Evaluation Report?
Answer: D
Explanation:
ICC-ES ESR-1539 is the applicable evaluation report, making option C correct. ESR-1539 addresses nails and staples manufactured by participating companies and evaluates their use in engineered and nonengineered structural connections.
An ICC-ES Evaluation Report provides evidence that a proprietary product or system complies with specified building-code requirements where the product does not rely solely on the generic prescriptive provisions of the IBC. For proprietary nails, the report provides the technical basis needed to establish characteristics such as dimensions, materials, recognized structural applications, allowable design values, installation limitations, and conditions of use.
The current ICC-ES document is published as ESR-1539P, reflecting subsequent administrative updates to the report, but the identifying evaluation-report number remains 1539 , matching option C and the examination question.
For special inspection, merely recognizing the ESR number is not enough. The inspector should verify that the installed proprietary fastener is actually included in the report, that its diameter and length correspond to the approved construction documents, and that installation spacing, penetration, orientation, substrate, and other report conditions are satisfied.
References/Topics: ICC-ES ESR-1539, structural nails and staples; proprietary fastener evaluation and installation requirements. ICC-ES states that the nails and staples covered by ESR-1539 are used in engineered and prescriptive structural connections.
NEW QUESTION # 16
Refer to the exhibit by clicking on the EXHIBIT button above.
In the detail shown, if the connections at the glulam beam and the steel plate required a fire-resistance rating of one (1) hour and the wood cover is designed per AWC Technical Report 10 to provide the entire one (1) hour of protection, the minimum required thickness for the wood block member providing protection for the bolt connections is _____ inches.
Answer: B
Explanation:
The required minimum wood protection thickness is 1.75 inches , making option B correct. AWC Technical Report No. 10 establishes a thermal-separation methodology for protecting steel connectors and fasteners with sacrificial wood cover. Because the question specifies that the wood cover itself must provide the entire 60- minute fire-protection period, the protection thickness must be calculated using the thermal-separation provisions rather than relying on residual fire resistance from the connector or steel plate.
TR10 applies a reduction to the protection contribution of the base wood layer. Its connection examples use the relationship in Section 4.4.1.3, with the required thermal protection time divided by 0.85. For a 60-minute requirement, back-calculating the prescribed nonlinear wood charring equation gives approximately 1.71 inches of required wood thickness. The practical minimum corresponding to the available choices is therefore
1.75 inches.
The principle is critical for special inspection: steel connection components have high thermal conductivity and must remain below the temperature limits assumed by the connection fire design. The inspector must verify actual wood-cover thickness, fastening, continuity, and any gaps before concealment.
References/Topics: AWC Technical Report No. 10, Sections 4.4.1.3 and 4.5; connection thermal separation; wood protection of steel connectors. TR10 demonstrates the same calculation methodology for wood-covered steel connections.
NEW QUESTION # 17
Both surfaces of a two-hour-rated mass timber wall that serves as a required separation between a Group R and Group I-2 occupancy in a Type IV-C building must be protected by at least which of the following?
Answer: B
Explanation:
The minimum additional protection is 1/2-inch gypsum board or an approved equivalent thermal barrier
, making option C correct.
The wall in the question functions as an occupancy separation. Under IBC Section 508.4.4.1, mass timber elements serving as fire barriers or horizontal assemblies separating occupancies in Type IV-B or IV-C construction must be separated from the building interior by an approved thermal barrier consisting of gypsum board at least 1/2 inch thick , or a material satisfying both applicable NFPA 275 thermal-barrier tests.
Because the wall separates two interior occupancies, each face is exposed to interior space; consequently, the thermal-barrier requirement applies to both surfaces .
This requirement must not be confused with the wall ' s two-hour fire-resistance rating. The underlying mass timber wall must independently satisfy the required two-hour assembly performance. The 1/2-inch gypsum protection is an additional thermal-barrier condition imposed because the rated separation is constructed of mass timber in Type IV-C.
Option D would provide substantially more gypsum protection than the specific occupancy-separation provision requires.
References/Topics: 2021 IBC Sections 508.4.4 and 508.4.4.1; Type IV-B/IV-C mass timber occupancy separations; approved thermal barriers; NFPA 275.
NEW QUESTION # 18
Given: Sealants or adhesives need not be provided where they are not a required component of a tested fire resistance rated assembly.
If a sealant is required, it must meet the requirement of ASTM:
Answer: D
Explanation:
A sealant required to resist air passage between qualifying mass timber elements must comply with ASTM C920. Therefore, option C is correct. ASTM C920 is the recognized specification for elastomeric joint sealants and establishes requirements for properties such as movement capability, adhesion, cohesion, hardness, weathering, and durability.
IBC Section 703.7 differentiates between the two materials: sealants must meet ASTM C920, while adhesives must meet ASTM D3498. Option D therefore applies to an adhesive rather than a sealant. ASTM E119 is the standard fire test used to establish the fire-resistance rating of structural members and assemblies; it does not serve as the product specification for the sealant. ASTM E114 is not the applicable standard under this provision.
The stated exception is important. Section 703.7 does not require an additional sealant or adhesive where it is not a required component of the tested fire-resistance-rated assembly. Where the approved assembly or code provision does require it, however, the specified product, location, joint preparation, backing material, depth, width, and tooling must match the approved construction documents.
References/Topics: 2021 IBC Section 703.7; ASTM C920 sealants; ASTM D3498 adhesives; tested fire- resistance-rated assemblies.
NEW QUESTION # 19
Sealants used to resist passage of air in construction Type IV-A, shall be in accordance with which of the following standards?
Answer: C
NEW QUESTION # 20
......
With the pass rate reaching 98.65%, our 93-Tall-Mass-Timber-Buildings training materials have gained popularity in the international market. If you choose us, we can ensure that you can pass the exam in your first attempt. We are pass guarantee and money back guarantee for 93-Tall-Mass-Timber-Buildings exam dumps. If you fail to pass the exam, we will give you refund. You can try free demo before buying 93-Tall-Mass-Timber-Buildings Exam Materials, so that you can have deeper understanding of what you are going to buy. Free update for one year is available, the update version for 93-Tall-Mass-Timber-Buildings exam braindumps will be sent to your email automatically.
93-Tall-Mass-Timber-Buildings Fresh Dumps: https://www.prepawayete.com/International-Code-Council/93-Tall-Mass-Timber-Buildings-practice-exam-dumps.html
P.S. Free & New 93-Tall-Mass-Timber-Buildings dumps are available on Google Drive shared by PrepAwayETE: https://drive.google.com/open?id=1tpub51JqMz592Bu1HJdzy2SPhuSvOATd