UpdateDumps is a leading platform that has been helping the Fortinet NSE5_FSW_AD-7.6 exam candidates for many years. Over this long time period, countless Fortinet NSE5_FSW_AD-7.6 exam candidates have passed their dream Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) certification and they all got help from valid, updated, and Real NSE5_FSW_AD-7.6 Exam Questions. So you can also trust the top standard of Fortinet NSE5_FSW_AD-7.6 exam dumps and start NSE5_FSW_AD-7.6 practice questions preparation without wasting further time.
| Section | Objectives |
|---|---|
| Deployment and management | - Configure and provision FortiSwitch - Deploy FortiSwitch supported deployment topologies - Deploy and configure FortiSwitch in a multi-tenancy environment |
| FortiSwitch concepts | - Configure switching and routing on FortiSwitch - Configure the ports required for stack deployment - Configure STP to prevent network loops - Use QoS and LLDP-MED on FortiSwitch - Configure VLANs using FortiSwitch - Configure switch ports, split port, and available transceivers |
| Layer 2 control and security | - Use port security options on FortiSwitch - Use filtering and antispoofing techniques on FortiSwitch - Use ACLs, security profiles, and VLAN security mechanisms on FortiSwitch |
| Monitoring and troubleshooting | - Use tools to view and extract network information from FortiSwitch - Use packet capturing methods to monitor and troubleshoot traffic issues - Interpret system logs, monitor port statistics, and diagnose connectivity issues - Troubleshoot FortiLink issues |
>> Free Sample NSE5_FSW_AD-7.6 Questions <<
Choosing our NSE5_FSW_AD-7.6 real dumps as your study guide means you choose a smart and fast way to get succeed in the certification exam. There are accurate NSE5_FSW_AD-7.6 test answers and some explanations along with the exam questions that will boost your confidence to solve the difficulty of NSE5_FSW_AD-7.6 Practice Test. You will enjoy great benefits if you buy our NSE5_FSW_AD-7.6 braindumps now and free update your study materials one-year.
NEW QUESTION # 93
Refer to the exhibits.
Port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
Answer: A,B
Explanation:
When loop guard is enabled on port1 and port2 configured with the same native VLAN (VLAN 10), there are specific scenarios under which port1 can be shut down due to loop guard operation:
A).port1 was shut down by loop guard protection.Loop guard is a specific feature used in network environments to prevent alternative or redundant loops. When loop guard is active, it can shut down a port if it stops receiving BPDU (Bridge Protocol Data Units) on a port that is expected to receive them, assuming a loop or link failure and putting the port into an inconsistent state to prevent potential loops.
B).STP triggered a loop and applied loop guard protection on port1.If the Spanning Tree Protocol (STP) detects a loop or loss of BPDU transmissions while loop guard is enabled, it will proactively shut down the port to prevent network instability or a broadcast storm. This is an essential function of loop guard within the context of STP, providing additional protection against topology changes that could introduce loops.
References:
Additional details about loop guard functionality and STP interaction can be found in the FortiSwitch administration guides, accessible viaFortinet Documentation.
NEW QUESTION # 94
Which two statements about managing a FortiSwitch stack on FortiGate are true? (Choose two.)
Answer: B,C
Explanation:
* A FortiLink interface must be enabled on FortiGate (A): To manage a FortiSwitch stack, a dedicated FortiLink interface on the FortiGate is required. This interface is used to manage the communication between FortiGate and the FortiSwitch stack, enabling centralized control and configuration of the switches directly from the FortiGate.
* The switch controller feature must be enabled on FortiGate (B): Enabling the switch controller feature on FortiGate allows it to manage connected FortiSwitch units. This feature provides tools and interfaces on the FortiGate for overseeing FortiSwitch configurations, monitoring switch status, and managing network policies across the stack.
NEW QUESTION # 95
Refer to the exhibit.
Port24 is the only uplink port connected to the network where you need access to FortiSwitch management services. However, FortiSwitch is not accessible on its management interface with IP address 10.0.13.3.
Based on the configuration shown in the exhibit, which two actions should you take to fix the issue and access FortiSwitch? (Choose two answers)
Answer: B,C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guide (Page 320), management traffic on a FortiSwitch is associated with a specific logical interface, which in this case is the"internal"interface. The exhibit shows that the"internal"interface is configured onVLAN 4094(both as native and allowed). This means that for any management traffic (such as HTTPS, SSH, or SNMP) to reach the switch CPU, it must be able to traverse the physical uplink on VLAN 4094.
However, the configuration forport24(the uplink) is currently restricted. It is set withnative VLAN 100and an allowed-vlans list that only includes100 and 200. Because VLAN 4094 is not included in the allowed list of port24, all frames belonging to the management VLAN (4094) are dropped by the switch's ingress/egress filters on the uplink.
To resolve this and restore management access, the administrator has two valid configuration paths based on the provided options:
* Option B:Change thenative VLAN on port24 to VLAN 4094. By making 4094 the native VLAN, untagged management traffic can traverse the port, effectively allowing the "internal" interface to communicate with the network.
* Option D:Add VLAN 4094 to the allowed VLANs on port24. This ensures that VLAN 4094 is no longer filtered out, allowing management frames to pass through the uplink while maintaining the current native VLAN for other traffic.
Option C is irrelevant as removing a working VLAN (200) does not help the management traffic. While Option A describes an alternate architectural approach (moving management into an already-allowed VLAN), Options B and D represent the direct fixes for the mismatch described in the 7.6 administration documentation.
NEW QUESTION # 96
Refer to the exhibit.
The command diagnose switch physical-ports summary is executed on FortiSwitch.
Based on the VLAN assignments shown in the output, what is the most likely management configuration of this FortiSwitch? (Choose one answer)
Answer: D
Explanation:
The output of the diagnose switch physical-ports summary command provides critical insight into how a FortiSwitch is being managed by examiningVLAN assignments,tag protocol identifiers (TPID), andinternal port behavior. In the provided exhibit, several ports-includingport1,port5, and theinternalport-are assigned toVLAN 4094.
According to the FortiSwitchOS 7.6 Administrator Guide,VLAN 4094 is reserved for FortiLink management trafficwhen a FortiSwitch is managed by a FortiGate. FortiLink uses this dedicated VLAN to carry control- plane traffic such as configuration synchronization, monitoring data, LLDP-based discovery, and keepalive messages between the FortiGate and FortiSwitch. The presence of VLAN 4094 on physical interfaces is a strong and explicit indicator ofFortiGate-managed mode.
In standalone or local management mode, FortiSwitch ports typically default toVLAN 1or administrator- defined VLANs, andVLAN 4094 is not automatically assigned. Similarly, FortiSwitch Cloud-managed devices do not use VLAN 4094 in this manner, as cloud management relies on IP connectivity to FortiEdge Cloud rather than FortiLink encapsulation.
Additionally, the internal port showing VLAN 4094 further confirms FortiLink operation, as this internal interface is used by the switch ASIC to communicate with the FortiGate over the FortiLink tunnel. This behavior is documented in FortiOS 7.6 and FortiSwitchOS 7.6 design guides as characteristic of FortiGate- managed FortiSwitch deployments.
Therefore, based on the VLAN assignments shown-specifically the use ofVLAN 4094-the most accurate and fully verified conclusion is thatthe FortiSwitch is managed by FortiGate, makingOption Bthe correct answer.
NEW QUESTION # 97
Refer to the exhibit.
After reviewing the CLI command output, which two conclusions can you make about the Dynamic Host Configuration Protocol (DHCP) snooping configuration? (Choose two answers)
Answer: B,C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, DHCP snooping is a security feature that acts as a firewall between untrusted hosts and trusted DHCP servers. It validates DHCP messages from untrusted sources and filters out invalid messages.
The provided debug output reveals specific configuration details that support the correct answers:
* Option 82 Support (Option C):The output line option82-enabled-vlans : 10 explicitly indicates that DHCP Option 82 is active for that specific VLAN. When Option 82 is enabled on a VLAN, the FortiSwitch (acting as a relay agent or snooping device) inserts information about the physical port and VLAN into the DHCP request packet before it is forwarded to the server. This allows the server to apply location-based IP address allocation policies.
* Broadcast Traffic Handling (Option D):In the " DHCP Global Configuration " section, theDHCP Broadcast Modeis set toAll. In FortiSwitchOS 7.6, the default behavior for DHCP snooping is to forward DHCP broadcast traffic to all ports in the VLAN unless explicitly restricted. Setting the mode to " All " means the switch does not limit the propagation of DHCP broadcast packets solely to trusted interfaces; instead, they are flooded to both trusted and untrusted ports within the broadcast domain. To restrict broadcasts, the mode would need to be changed to " Trusted-Only " .
Regarding the incorrect options:Option Ais false because the output shows snoop-enabled-vlans : 10, confirming it is active.Option Bis incorrect because the trusted ports list includes port2, FlInK1, and MLAG0, meaning multiple interfaces are trusted, not just port2.
NEW QUESTION # 98
......
Every working person knows that NSE5_FSW_AD-7.6 is a dominant figure in the field and also helpful for their career. If NSE5_FSW_AD-7.6 reliable exam bootcamp helps you pass NSE5_FSW_AD-7.6 exams and get a qualification certificate you will obtain a better career even a better life. Our NSE5_FSW_AD-7.6 Study Guide materials cover most of latest real NSE5_FSW_AD-7.6 test questions and answers. If you are certainly determined to make something different in the field, a useful certification will be a stepping-stone for your career.
Valid NSE5_FSW_AD-7.6 Exam Cram: https://www.updatedumps.com/Fortinet/NSE5_FSW_AD-7.6-updated-exam-dumps.html