P.S. Free 2026 Nutanix NCP-BC-7.5 dumps are available on Google Drive shared by ActualTestsIT: https://drive.google.com/open?id=1iMNIEMFpOZLySlLCXl7woMg_Rpl82Jx6
With vast experience in this field, ActualTestsIT always comes forward to provide its valued customers with authentic, actual, and genuine NCP-BC-7.5 exam dumps at an affordable cost. All the Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 (NCP-BC-7.5) questions given in the product are based on actual examination topics. ActualTestsIT provides three months of free updates if you purchase the Nutanix NCP-BC-7.5 Questions and the content of the examination changes after that.
| Section | Objectives |
|---|---|
| Monitoring, Testing and Troubleshooting | - Non-disruptive recovery testing - Resolving third-party backup integration problems - Documenting runbooks for incident response - Diagnosing network, storage and replication failures - Troubleshooting permission issues and misconfigured DR environments - Setting up alerts for replication lag |
| Nutanix Disaster Recovery Solutions | - Failover procedures and execution - Metro Availability configuration and management - Integration with third-party backup solutions - Configuring and managing replication policies - Recovery workflows using Nutanix native tools |
| BCDR Fundamentals and Requirements Interpretation | - Defining recovery strategies aligned to business requirements and risk tolerance - Selecting appropriate replication types (async, near-sync, synchronous, metro) - Availability metrics and SLA definitions - Translating business requirements into resilient recovery architectures - Understanding RTO and RPO concepts and business impact analysis |
| Security and Hardening | - Security best practices for replication - RBAC implementation for disaster recovery - Approval policies configuration - Designing secure BCDR environments |
| Replication and Failover Architecture | - Asynchronous replication planning - Network segmentation for BCDR environments - Failover readiness validation - Recovery site capacity management - Synchronous replication across sites |
| Data Protection and Snapshots | - Snapshot scheduling and management - Data restoration at VM and application level - Snapshot retention policies design - Incremental backup implementation - Storage configuration for BCDR |
>> NCP-BC-7.5 Certification Dump <<
Practicing with Nutanix NCP-BC-7.5 Exam questions will help you to become an expert in and acquire the Nutanix NCP-BC-7.5. Nutanix NCP-BC-7.5 Exam Questions allow you to verify your skills as a professional. You have to pass the Nutanix NCP-BC-7.5 to achieve the associate-level certification.
NEW QUESTION # 21
An administrator incorrectly used the " Activate " functionality on the PD to test failover of VMs from production to DR cluster. The VMs were successfully restored on the DR side. What steps are needed to clean up the VMs on the DR side and resume normal operations on the Production cluster?
Answer: A
Explanation:
In Nutanix Disaster Recovery using Protection Domains (PDs), " Activate " is a high-level command used to promote a remote site to an active state. This is typically reserved for an unplanned failover scenario when the primary site is completely offline. If an administrator mistakenly uses " Activate " for a test instead of the proper " Test Failover " workflow, the secondary cluster will begin treating the replicated snapshots as active, live virtual machines. This process involves promoting the storage and registering the VMs to the local hypervisor.
To return to a steady state where the production cluster is the only active site, the administrator must perform a cleanup on the DR cluster. The " Deactivate " command on the DR cluster serves two main purposes: it changes the Protection Domain status from " Active " back to " Standby " and provides an option to " Destroy VMs " associated with that PD. Choosing to destroy the VMs on the DR cluster is essential to prevent duplicate VM instances or IP address conflicts when production resumes. Simply deleting the VMs manually (Option C) is insufficient because it does not reset the PD ' s metadata status in the Nutanix Cerebro service.
By deactivating the PD and destroying the VMs at the DR site, the administrator ensures that the DR site returns to its role as a passive replication target, allowing the primary production cluster to continue its operations without being impacted by the accidental activation.
NEW QUESTION # 22
An administrator recently expanded a Nutanix cluster by adding several new nodes. Shortly after, multiple backup jobs began failing. The following error is consistently reported: " Failed to perform backup: Cannot complete process ' iscsiadm --mode discovery --type sendtargets --portal X.X.X.X ' within timeout " . What is the most likely cause of the failure?
Answer: A
Explanation:
Nutanix storage is often accessed by external backup solutions (like Veeam, Commvault, or HYCU) using the iSCSI protocol. This allows the backup server to mount snapshots and read data directly from the storage tier.
The error message " iscsiadm... discovery... timeout " specifically indicates that the backup server ' s iSCSI initiator is unable to communicate with the Nutanix Data Services IP or the Controller VMs (CVMs) over the network.
When a Nutanix cluster is expanded, it is essential that all networking and firewall configurations applied to the existing nodes are also applied to the new nodes. The iSCSI protocol relies on specific TCP ports: port
3260 is the standard port for iSCSI traffic, and port 3205 is often used for iSCSI discovery and metadata operations within Nutanix. If these ports are not open in the physical firewall or the host-based security rules for the newly added nodes, the backup server will be unable to discover the targets on those specific nodes, leading to the timeout errors . This highlights a common " Day 2 " operational trap: cluster expansion requires careful auditing of network security groups and firewall whitelists to ensure that external integrations- especially BCDR and backup services-continue to have uninterrupted access to the expanded storage fabric.
Verifying and opening ports 3205 and 3260 for the new node IPs is the first step to resolving this timeout issue.
NEW QUESTION # 23
An administrator executes an Unplanned Failover. The VMs recover at the Recovery Site and are powered on.
However, the application owners report that the VMs are completely isolated and cannot communicate with any other services on the network. The administrator checks the Recovery Plan and notices the Network Mapping section was left blank.
What is the expected configuration for VMs recovered without a valid Network Mapping?
Answer: A
Explanation:
In the Nutanix Disaster Recovery orchestration workflow, Network Mapping is a critical step that tells the system which production VLAN at the primary site corresponds to which VLAN at the recovery site. This ensures that when a VM is recovered, its virtual NIC (vNIC) is " plugged in " to a functional and valid network at the new location.
If an administrator leaves the Network Mapping section blank, the Nutanix orchestrator has no information about where to connect the VM ' s network interface. In this scenario, the priority of the system is to ensure the VM can boot and start its services without causing a " network storm " or security risk. If the system were to simply attach the VM to a random or default network, it could cause IP address conflicts or expose the VM to the wrong security zone. Therefore, the built-in behavior for a failover without a valid mapping is to recover the VM with all its network adapters in a " disconnected " state. The vNIC still exists on the VM, but the " connected " checkbox in the hypervisor is unchecked. This explains why the application owners report that the VMs are " isolated. " To fix this, the administrator must either update the Recovery Plan with the correct mappings and re-run the task or manually connect each VM ' s vNIC to the correct local VLAN in the recovery site ' s Prism interface.
NEW QUESTION # 24
An administrator executes a Recovery Plan for a set of high-performance VMs configured with SR-IOV network adapters. The VMs failover successfully to the Recovery Cluster.
What is the state of these VMs immediately after the planned failover completes?
Answer: A
Explanation:
Single Root I/O Virtualization (SR-IOV) allows a virtual machine to bypass the hypervisor ' s virtual switch and communicate directly with a physical network adapter ' s virtual functions. This is commonly used for high-performance applications that require extremely low latency and high throughput. However, SR-IOV creates a " hard " dependency between the virtual machine and the specific physical hardware (NIC) of the host it is running on.
Disaster Recovery involves moving a VM to an entirely different cluster, which likely has different physical network adapters or a different SR-IOV configuration. Nutanix Disaster Recovery orchestration is designed to ensure that VMs can always boot at the recovery site, even if specialized hardware resources are unavailable.
For VMs configured with SR-IOV, the recovery process includes a built-in fallback mechanism. During failover, the system will recover the VM and power it on, but it will disable the SR-IOV attachment. To ensure connectivity, it automatically adds or falls back to a standard virtio-net virtual adapter. This allows the VM to have network access immediately, though at a potentially lower performance level. The administrator must then manually re-configure SR-IOV at the recovery site if the local hardware supports it. This design prioritizes service availability (powering on and communicating) over specialized hardware performance during a disaster recovery event.
NEW QUESTION # 25
A security team has detected a ransomware attack that began encrypting files on the primary site at 2:00 AM.
By 2:45 AM, the primary site is still accessible but workloads are compromised. The administrator needs to recover to a known-good state from before the attack.
Which statement shows the action and reasoning that the administrator should consider?
Answer: B
Explanation:
In a Nutanix Disaster Recovery context, choosing the right failover type is critical during a ransomware event.
A " Planned Failover " is designed for maintenance scenarios. Its first step is to synchronize the current data state to the recovery site to ensure zero data loss. In a ransomware attack, the " current state " is encrypted or corrupted data. If an administrator performs a Planned Failover at 2:45 AM, the system will capture and replicate the encrypted files, effectively " backing up " the ransomware to the recovery site.
To successfully recover from ransomware, the administrator must perform an " Unplanned Failover. " Despite the name, this failover type is the correct choice for this scenario because it allows the administrator to manually select a historical recovery point from the destination cluster ' s storage. By choosing a recovery point from 1:00 AM (before the attack began), the administrator can restore the virtual machines to a known- good, unencrypted state. This is a primary use case for maintaining a multi-day or multi-week snapshot retention policy. While a " Test Failover " (Option A) could be used to verify the 1:00 AM snapshot in an isolated network first, the ultimate production recovery is achieved via an Unplanned Failover that specifically targets a point-in-time snapshot that predates the infection.
NEW QUESTION # 26
......
Our NCP-BC-7.5 exam questions are unlike other study materials that are available on the market, NCP-BC-7.5 guide quiz specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. And if you buy the value pack, you have all of the three versions, the price is quite preferential and you can enjoy all of the study experiences. This means you can NCP-BC-7.5 Practice Engine anytime and anyplace for the convenience these three versions bring.
NCP-BC-7.5 Exam Overview: https://www.actualtestsit.com/Nutanix/NCP-BC-7.5-exam-prep-dumps.html
DOWNLOAD the newest ActualTestsIT NCP-BC-7.5 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1iMNIEMFpOZLySlLCXl7woMg_Rpl82Jx6