What's more, part of that Prep4sureGuide NCP-MCI-7.5 dumps now are free: https://drive.google.com/open?id=1vh81KIMd16NeMlLCXAzU6kXy2g7ZBAU9
The Prep4sureGuide recognizes that students invest significant time and resources in their Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 (NCP-MCI-7.5) certification preparation. Therefore, the Prep4sureGuide is committed to save their money with up to 365 days of free questions updates. The Prep4sureGuide regularly updates its practice material to ensure that users have the most up-to-date questions. The Prep4sureGuide also offers a money-back guarantee (terms and conditions apply) for those who fail to get success, which demonstrates its commitment to users' success.
| Section | Weight | Objectives |
|---|---|---|
| Storage Configuration | 10-15% | - Volume groups - Data reduction and compression - Storage pools and containers - Storage tiering |
| Troubleshooting and Monitoring | 10-15% | - Log collection and analysis - Prism alerts and notifications - Performance monitoring - Common issue resolution |
| Networking Concepts | 15-20% | - IP address management - Flow networking (Nutanix Flow) - Network security policies - Network virtualization with AHV |
| Security and Authentication | 15-20% | - Audit logging - Authentication integration (LDAP/AD) - Role-Based Access Control (RBAC) - SSL certificate management |
| Multi-Cluster Operations | 20-25% | - Centralized management across multiple clusters - Cluster discovery and registration - Cluster health monitoring |
| Prism Central | 20-25% | - Prism Central overview and deployment - Prism Central navigation and dashboard - Managing clusters via Prism Central |
| Infrastructure Lifecycle Management | 20-25% | - AHV hypervisor management - Lifecycle Manager (LCM) operations - Node addition and removal - Upgrading AOS and firmware |
>> NCP-MCI-7.5 Test Score Report <<
During the prolonged review, many exam candidates feel wondering attention is hard to focus. But our NCP-MCI-7.5 real exam is high efficient which can pass the NCP-MCI-7.5 exam during a week. To prevent you from promiscuous state, we arranged our NCP-MCI-7.5 Learning Materials with clear parts of knowledge. Besides, without prolonged reparation you can pass the NCP-MCI-7.5 exam within a week long. Everyone's life course is irrevocable, so missing the opportunity of this time will be a pity.
NEW QUESTION # 81
An administrator needs to enable Marketplace in Prism Central before deploying Nutanix apps.
Which prerequisite must be met on the Prism Element cluster hosting Prism Central to enable Marketplace?
Answer: D
Explanation:
Nutanix documentation for enabling Marketplace in Prism Central explicitly states that a unique data services IP address (DSIP) must be configured on the Prism Element cluster that hosts Prism Central. This is a hard prerequisite for Marketplace enablement and application deployment workflows. In exam terms, the presence of DSIP is not optional convenience; it is a setup requirement Nutanix calls out directly before Marketplace can be used. ( Nutanix ) The other answers are not Marketplace prerequisites in the same direct sense. SMTP is useful for email notifications, LDAP for external authentication, and LACP for network design, but none of those is the documented enabling requirement for Marketplace. Nutanix separates platform application management prerequisites from general infrastructure best practices, and DSIP falls into the former category. So when the exam asks what must already be in place on the Prism Element cluster before enabling Marketplace, the correct answer is A: Data services IP must be configured. ( Nutanix )
NEW QUESTION # 82
An administrator needs to configure the virtual switch on a Nutanix AHV cluster to maximize both per-VM and per-host network throughput with LACP support. Which bond type should the administrator configure?
Answer: A
Explanation:
Nutanix networking documentation is explicit that LACP on AHV requires the Active-Active bond type, also described as balance-tcp. Nutanix further explains that this mode increases host and VM bandwidth utilization beyond a single uplink by balancing VM NIC TCP and UDP sessions across multiple physical adapters. That directly addresses both parts of the requirement in the question: maximizing per-host throughput and per-VM throughput while also providing LACP support. For that reason, B is the correct answer.
The other options do not satisfy the stated requirement. Active-Backup gives redundancy but does not aggregate active bandwidth. Active-Active with MAC pinning (balance-slb) can use multiple adapters without switch configuration, but Nutanix documents that it must not be used with LACP. "No Uplink Bond" obviously cannot maximize throughput or provide aggregation. This question is testing a core AHV networking distinction: if the user explicitly wants LACP, then the answer is always the Active-Active / balance-tcp model. That is why B is the authentic Nutanix answer.
NEW QUESTION # 83
An administrator is troubleshooting intermittent network connectivity issues on an AHV host and runs the following command:
ethtool -S eth0 | grep error
Output:
rx_crc_errors: 4389675534
rx_missed_errors: 0
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_window_errors: 0
rx_long_length_errors: 0
rx_short_length_errors: 0
rx_align_errors: 0
rx_errors: 0
tx_errors: 0
rx_length_errors: 0
rx_over_errors: 0
rx_frame_errors: 0
rx_fifo_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
The command is executed multiple times and it is observed that the CRC errors are incrementing.
What is the most likely cause of the high rx_crc_errors observed on the interface?
Answer: D
Explanation:
Incrementing rx_crc_errors usually point to a Layer 1 or physical-path problem, not a CPU or memory issue.
CRC errors mean frames are arriving corrupted, and the most common reasons are a faulty cable, damaged transceiver, bad port, or another physical medium issue between the AHV host and the switch. Because the CRC counter is specifically increasing while other counters like missed, FIFO, and general rx errors remain low, this strongly suggests corruption during transmission rather than host overload. That makes B the correct answer.
A duplex mismatch can cause broader link-performance problems, but the pattern of steadily rising CRC errors is much more classically tied to bad physical media. MTU issues usually show fragmentation or packet- handling problems, not CRC corruption itself. CPU saturation does not create on-the-wire checksum corruption. In Nutanix troubleshooting, when CRC counters rise repeatedly, the correct operational response is to inspect and swap the cable or optics, verify switch-port health, and test the NIC path physically. So B is the strongest technical match.
NEW QUESTION # 84
An administrator needs to enable software data-at-rest encryption on a 2-node ROBO cluster. The organization requires that encryption keys are stored on-premises outside of the cluster. Which KMS type should the administrator configure?
Answer: D
Explanation:
Here the uploaded answer key says D, but official Nutanix documentation supports B. Nutanix documents that for enhanced security of ROBO environments (typically 1- or 2-node clusters), administrators should select Native KMS (remote) for software-based encryption. Nutanix also states in KMS considerations that software encryption using Native KMS is supported for ROBO deployments using the Native KMS (remote) KMS type. Because the question explicitly describes a 2-node ROBO cluster and requires the keys to be stored outside the cluster, the Nutanix-authentic answer is B. Native KMS (remote).
An external KMS is valid in many enterprise encryption designs, but this question is more specific: it asks for the KMS type Nutanix supports and recommends for software encryption on a ROBO cluster. On that narrow requirement, the official docs point to Native KMS (remote) rather than External KMS. So for an authentic study guide aligned to Nutanix documentation, B is the correct answer.
NEW QUESTION # 85
An administrator would like to upgrade LCM (Life Cycle Management) to the latest version on an AHV cluster. Which step should the administrator take to guarantee LCM is upgraded to the latest version?
Answer: C
Explanation:
Nutanix documentation states that when you perform an LCM inventory, Life Cycle Manager first checks and updates its own framework before presenting other upgrade options. Nutanix's guidance for framework updates and recommended upgrade order repeatedly references Perform Inventory as the step that ensures the system discovers and updates the LCM framework itself. That is why A is the correct answer when the goal is specifically to guarantee LCM is upgraded to the latest version. ( Nutanix ) The other actions may be valid parts of broader maintenance, but they do not ensure the LCM framework itself is brought to the latest version. Upgrading AHV or AOS addresses platform components, not the LCM service logic. Running NCC is good pre-upgrade hygiene, but it is not the mechanism that causes LCM to update. Nutanix intentionally ties framework currency to the inventory process, so the correct operational answer is to perform an inventory first. ( Nutanix )
NEW QUESTION # 86
......
Are you an exam jittering? Are you like a cat on hot bricks before your driving test? Do you have put a test anxiety disorder? If your answer is yes, we think that it is high time for you to use our NCP-MCI-7.5 Exam Question. Our study materials have confidence to help you pass exam successfully and get related certification that you long for, and we can guarantee that if you don’t pass the exam, we will give you full refund.
Test NCP-MCI-7.5 Quiz: https://www.prep4sureguide.com/NCP-MCI-7.5-prep4sure-exam-guide.html
P.S. Free 2026 Nutanix NCP-MCI-7.5 dumps are available on Google Drive shared by Prep4sureGuide: https://drive.google.com/open?id=1vh81KIMd16NeMlLCXAzU6kXy2g7ZBAU9