BTW, DOWNLOAD part of BraindumpsPass NSE6_OTS_AR-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=17lwesjOrUIduRnNfTf0_oXPC6I_l1yjQ
We all need some professional certificates such as NSE6_OTS_AR-7.6 to prove ourselves in different working or learning condition. So making right decision of choosing useful practice materials is of vital importance. Here we would like to introduce our NSE6_OTS_AR-7.6 practice materials for you with our heartfelt sincerity. With passing rate more than 98 percent from exam candidates who chose our NSE6_OTS_AR-7.6 study guide, we have full confidence that your NSE6_OTS_AR-7.6 exam will be a piece of cake by them.
| Section | Weight | Objectives |
|---|---|---|
| OT Security Fundamentals and Standards | 20% | - Industry standards and compliance frameworks (ISA-95, IEC 62443, NIST) - OT vs IT environments and convergence - Purdue Reference Model and zone-conduit model |
| Monitoring, Threat Detection and Response | 15% | - FortiAnalyzer, FortiSIEM usage for OT security - Threat detection and incident response - Continuous monitoring and logging - Risk assessment and mitigation |
| Network Security and Segmentation | 25% | - Industrial protocol security (Modbus, DNP3, OPC, S7) - Firewall policies and inspection for OT traffic - Secure OT network design and segmentation strategies - Virtual patching and vulnerability protection |
| Network Access Control | 15% | - FortiNAC integration in OT environments - OT-specific NAC design and deployment - Authentication and authorization for OT devices |
| Asset Management and Visibility | 25% | - Fortinet Security Fabric integration for asset visibility - Asset inventory and lifecycle management - Device detection and classification |
>> Latest NSE6_OTS_AR-7.6 Test Question <<
Please select our BraindumpsPass to achieve good results in order to pass Fortinet certification NSE6_OTS_AR-7.6 exam, and you will not regret doing so. It is worth spending a little money to get so much results. Our BraindumpsPass can not only give you a good exam preparation, allowing you to pass Fortinet Certification NSE6_OTS_AR-7.6 Exam, but also provide you with one-year free update service.
NEW QUESTION # 76
Refer to the exhibits.
The network topology and the software-switch configuration are shown.
Why is Engineering Workstation not able to access the PLCs?
Answer: A
Explanation:
The software switch is configured with intra-switch-policy explicit, which means traffic between member interfaces is not allowed automatically. Communication from the Engineering Workstation on port3 to the PLC on port2 requires an explicit firewall policy permitting that access.
NEW QUESTION # 77
Refer to the exhibit. PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT cannot send traffic to each other.
Which two statements about the traffic between PCL-1 and PLC-2 are true? (Choose two.)
Answer: A,B
Explanation:
Micro-segmentation prevents direct traffic flow between devices at the same VLAN or switch level, such as PLC-3 and CLIENT connected on FGT-2's software switch.
FGT-2 enforces this control by applying firewall policies on its interfaces to control intra-VLAN (east-west) traffic within the OT network.
The switch on FGT-2 does not need to be hardware; software switches can also enforce micro- segmentation.
Traffic inspection by FGT-EDGE is possible but local intra-VLAN traffic segmentation and control are the responsibility of FGT-2.
NEW QUESTION # 78
Refer to the exhibit.
The Core Network Security Connectors page of the FortiGate-2 device is shown. Which statement is correct? (Choose one answer)
Answer: A
Explanation:
Based on the provided exhibit and the OT Security 7.6 Architect curriculum regarding the Fortinet Security Fabric :
* Fabric Role : The exhibit clearly shows that FortiGate-2 has the role set to Join Fabric . This confirms it is a downstream device and not the Fabric Root (eliminating Option A).
* Upstream Connection : The device is configured to point to an Upstream FortiGate at IP address
10.1.2.254 .
* Fabric Status : The status is currently displayed as Not Connected . In a standard Fortinet Security Fabric deployment, once a downstream device is configured to join the fabric, it sends a request to the upstream root device. The root FortiGate must then explicitly authorize the downstream unit before the connection is established and the status changes to " Connected. "
* Authorization Requirement : The " Not Connected " status, while having the upstream IP correctly configured, is the classic indicator that the authorization step is pending on the root FortiGate.
Furthermore, under the LAN Edge Devices section, it shows another downstream FortiGate requiring authorization on this specific unit, highlighting that authorization is a manual security requirement for all stages of the Fabric hierarchy.
* FortiAnalyzer Status : While the Logging & Analytics section shows FortiAnalyzer is Disabled , this is a configuration choice and does not prevent the Security Fabric from connecting; therefore, configuring it is not the solution to the connectivity status shown (eliminating Option C).
In summary, FortiGate-2 cannot join the fabric until an administrator logs into the Root FortiGate (10.1.2.254) and authorizes the join request from FortiGate-2.
NEW QUESTION # 79
An OT supervisor has configured LDAP and FSSO for authentication. The goal is that all users be authenticated against passive authentication first and. if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
Answer: A
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 80
Refer to the exhibit. An operational technology (OT) architect has implemented Modbus TCP with a simulation Conpot server to identify and control Modbus traffic in their OT network. The FortiGate-Edge device is configured with a software switch interface, SSW-01.
Based on the topology shown in the exhibit, which two statements must be true for the simulation of traffic between client and server to be successful? (Choose two.)
Answer: A,D
Explanation:
In the FortiGate firewall policy, NAT must be enabled from port3 to SSW-01: To ensure successful communication between the client and the Conpot server through FortiGate, Network Address Translation (NAT) must be configured in the firewall policy. This allows the client to access the server via the FortiGate interface by properly routing the traffic.
The FortiGate-Edge device must be in network address translation (NAT) operation mode:
FortiGate in NAT operation mode ensures that traffic between different subnets (e.g., client and server) is routed correctly, enabling communication and simulation in the given topology.
NEW QUESTION # 81
......
There are free demos giving you basic framework of NSE6_OTS_AR-7.6 practice materials. All are orderly arranged in our practice materials. After all high-quality demos rest with high quality NSE6_OTS_AR-7.6 practice materials, you can feel relieved with help from then. We offer free demos as your experimental tryout before downloading our real NSE6_OTS_AR-7.6 practice materials. For more textual content about practicing exam questions, you can download our NSE6_OTS_AR-7.6 practice materials with reasonable prices and get your practice begin within 5 minutes.
NSE6_OTS_AR-7.6 Reliable Test Simulator: https://www.braindumpspass.com/Fortinet/NSE6_OTS_AR-7.6-practice-exam-dumps.html
BONUS!!! Download part of BraindumpsPass NSE6_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=17lwesjOrUIduRnNfTf0_oXPC6I_l1yjQ