We can provide you with efficient online services during the whole day, no matter what kind of problems or consultants about our AZ-802 quiz torrent; we will spare no effort to help you overcome them sooner or later. First of all, we have professional staff with dedication to check and update out AZ-802 exam torrent materials on a daily basis, so that you can get the latest information from our AZ-802 Exam Torrent at any time. Besides our after-sales service engineers will be always online to give remote guidance and assistance for you if necessary. If you make a payment for our AZ-802 test prep, you will get our study materials in 5-10 minutes and enjoy the pleasure of your materials.
| Section | Objectives |
|---|---|
| Hybrid infrastructure management | - Monitoring and update management
|
| Secure and manage Windows Server environments | - Identity and access management
|
| Compute, storage, and virtualization | - Virtual machines and containers
|
| Networking and high availability | - Networking infrastructure
|
>> Reliable AZ-802 Real Test <<
The objective of AZ-802 is to assist candidates in preparing for the Administering Windows Server (AZ-802) certification test by equipping them with the actual Microsoft AZ-802 questions PDF and AZ-802 practice exams to attempt the prepare for your AZ-802 Exam successfully. The Administering Windows Server (AZ-802) practice material comes in three formats, desktop AZ-802 practice test software, web-based AZ-802 practice exam, and AZ-802 Dumps PDF that cover all exam topics.
NEW QUESTION # 86
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains the domains shown in the following table.
You are implementing Microsoft Defender for Identity sensors.
You need to install the sensors on the minimum number of domain controllers. The solution must ensure that Defender for Identity will detect all the security risks in both the domains.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Exhibit
Exhibit
Exhibit
Answer:
Explanation:
Explanation:
Microsoft Defender for Identity sensors capture and analyze authentication and directory traffic locally on each domain controller they are installed on, so detecting all security risks that touch either domain -- including risks involving the read-only domain controllers DC3 and DC6, which also process authentication traffic for their respective domains -- requires a sensor on every domain controller in the forest, DC1 through DC6, rather than only the PDC emulators or infrastructure masters; installing sensors on a subset would leave authentication traffic on the uncovered domain controllers unmonitored, creating a detection gap. Therefore the minimum number of domain controllers that still achieves full coverage of both domains is, in fact, all six
-- there is no smaller subset that captures every domain controller ' s local traffic. During each sensor ' s initial installation, it must be registered to the Defender for Identity workspace using the one-time access key that is generated and copied from the Microsoft Defender portal; after this initial registration, subsequent sensor-to- cloud communication is secured using certificates rather than requiring the access key, a gMSA, or a cloud- only Azure AD/Microsoft Entra user account again.
NEW QUESTION # 87
You need to meet the technical requirement for HyperV1. Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
hvc.exe, ssh User2@VM2
The requirement is to use a direct SSH session to manage all the supported virtual machines on HyperV1, without relying on a network path to the guest. Hyper-V provides hvc.exe, a helper used as an SSH ProxyCommand, that opens an SSH session to a virtual machine over the VMBus (the internal Hyper-V socket
/console channel) rather than over the network, which works even when the guest has no reachable IP configuration and only default management tools installed, matching the stated environment. Direct SSH management this way requires the guest to run an SSH server; of the three VMs, only VM2 runs Red Hat Enterprise Linux, which includes OpenSSH server support out of the box, so it is the only VM realistically " supported " for this direct SSH scenario as described, and the account to use is User2, the local account that exists on VM2. VM1 and VM3 both run Windows Server, so " direct SSH, " as intended by this requirement, targets the Linux guest. Connect-PSSession and Connect-WSMan are PowerShell remoting tools, not SSH, and mstsc.exe launches a graphical Remote Desktop session rather than a console-mode SSH session, so none of those alternatives fit. The correct combination is hvc.exe used as the SSH proxy, connecting as User2@VM2.
NEW QUESTION # 88
You have an Azure subscription. The subscription contains a virtual machine named VM1 that runs Windows Server. VM1 contains a 128-GB operating system disk.
You need to increase the size of volume C on VM1 to 250 GB.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Stop VM1. 2. Resize the operating system disk. 3. Start VM1. 4. Resize volume C.
Resizing an existing Azure managed disk ' s provisioned capacity, unlike attaching or detaching an additional data disk, requires the virtual machine using that disk to be stopped (deallocated) first; Azure does not permit a disk resize operation against a disk that is currently attached to a running VM. The first step is therefore to stop VM1. With the VM deallocated, the operating system disk can be resized (increased from 128 GB up to
250 GB) through the Azure portal, CLI, or PowerShell. Once the resize completes, VM1 must be started again so that Windows can see and use the newly enlarged disk. Growing the underlying managed disk only makes additional unallocated space available at the disk level; it does not automatically grow the NTFS volume sitting on that disk, so the final step is to resize volume C from within the guest operating system (using Disk Management ' s Extend Volume wizard or diskpart ' s extend command) to actually claim that unallocated space into the C: volume. Resizing VM1 (changing its compute size/SKU) and redeploying VM1 (moving it to different underlying hardware) are unrelated operations that do not participate in a disk-capacity-increase workflow at all. The correct order is: stop VM1, resize the operating system disk, start VM1, then resize volume C.
NEW QUESTION # 89
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains the domain controllers shown in the following exhibit, including a read-only domain controller named RODC1.
You need to ensure that if an attacker compromises the computer account of RODC1, the attacker cannot view the Employee-Number AD DS attribute. Which partition should you modify?
Answer: A
Explanation:
A read-only domain controller caches only the passwords (and, depending on the Password Replication Policy, credentials) of a limited set of accounts, but by default it still holds a full read-only copy of every other attribute ' s value for objects in its domain partition, including custom or sensitive attributes such as Employee-Number, unless that attribute has been specifically excluded. The mechanism for excluding a specific attribute from ever being replicated to any RODC is the RODC Filtered Attribute Set (FAS), which is configured by setting a bit in the searchFlags property of that attribute ' s attributeSchema object - and the schema, including every attributeSchema object, lives in the forest-wide schema partition, not in the domain, configuration, or global catalog partition. Marking Employee-Number as confidential/filtered in the schema partition causes it to be excluded from replication to any RODC in the forest going forward, meaning RODC1 would never hold that attribute ' s value at all, so even a full compromise of RODC1 ' s computer account (and therefore its cached directory data) could not expose it. Modifying the domain partition would not affect what an RODC caches, since the RODC FAS is a schema-level, forest-wide setting, not a domain-level one; the configuration partition manages forest-wide configuration data unrelated to attribute filtering; and there is no separate, independently modifiable global catalog partition - global catalog status is a server property, not a directory partition. The schema partition is therefore the one to modify.
NEW QUESTION # 90
Your network contains an on-premises Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.
For each server. Windows Defender Firewall is configured to allow only communication between servers on the same segment. Server! has the following connection security rule:
* Name: Rule1
* Rule type: Isolation
* Requirement: Require authentication for inbound connections and request authentication for outbound connections
* Authentication method: Computer (Kerberos V5)
* Profile: Domain. Private. Public
Server2 does not have any connection security rules.
Server3 has the following connection security rule:
* Name: Rute3
* Rule type: Server-to-server
* Endpoints:
o Computers in Endpoint 1:192.168.50/24
o Computers in Endpoint 2: 192.168.1.0/24
* Requirement Request authentication (or inbound and outbound connections
* Authentication method: Computer (Kerberos V5)
* Profile: Domain. Private. Public
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Exhibit
Answer:
Explanation:
Explanation:
A connection security rule only adds an authentication (IPsec) requirement to traffic that a firewall rule already permits; it does not, by itself, open or expand what a firewall rule allows. Because each server ' s Windows Defender Firewall is configured to allow communication only between servers on the same network segment, Server1 and Server2 (both on 192.168.1.0/24) are already permitted to communicate, so Server1 ' s Isolation rule, which only requests (not requires) outbound authentication, does not block that traffic even without a matching rule on Server2. Server3 sits on a different segment (192.168.5.0/24) from both Server1 and Server2, and because the firewall ' s same-segment scope restriction governs whether traffic is allowed at all, neither Server2 ' s attempt to reach Server3 nor Server3 ' s attempt to reach Server1 succeeds, regardless of the Server-to-server connection security rule configured on Server3, since that rule can only add authentication to already-permitted traffic and cannot bypass the firewall ' s segment-based scope restriction.
NEW QUESTION # 91
......
The Administering Windows Server (AZ-802) certification exam is a valuable credential that is designed to validate the candidates' skills and knowledge level. The AZ-802 certification exam is one of the high in demand industrial recognized credentials to prove your skills and knowledge level. With the Microsoft AZ-802 Certification Exam everyone can upgrade their skills and become competitive and updated in the market.
AZ-802 Updated Demo: https://www.vceprep.com/AZ-802-latest-vce-prep.html