P.S. Free & New NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by Prep4SureReview: https://drive.google.com/open?id=1u10-Y-QeXgjaYWAlJXNkUJJI68aWNRie
The Fortinet NSEI_OTS_AR-7.6 certification exam is one of the top-rated and valuable credentials in the Fortinet world. This Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 exam questions is designed to validate the candidate's skills and knowledge. With Fortinet NSEI_OTS_AR-7.6 exam dumps everyone can upgrade their expertise and knowledge level. By doing this the successful Fortinet NSEI_OTS_AR-7.6 Exam candidates can gain several personal and professional benefits in their career and achieve their professional career objectives in a short time period.
| Section | Objectives |
|---|---|
| Asset management | - Fortinet Security Fabric for an OT network - Explain OT standard and Fortinet compliance - Implement device detection on FortiGate and FortiNAC |
| Monitoring and risk assessment | - Perform risk assessment and management - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer |
| Network access control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Network security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
>> Free NSEI_OTS_AR-7.6 Updates <<
However, preparing for the NSEI_OTS_AR-7.6 exam is not an easy job until they have real Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam questions that are going to help them achieve this target. They have to find a trusted source such as Prep4SureReview to reach their goals. Get NSEI_OTS_AR-7.6 Certified, and then apply for jobs or get high-paying job opportunities. If you think that NSEI_OTS_AR-7.6 certification exam is easy to crack, you are mistaken.
NEW QUESTION # 14
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 15
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: A,D
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 16
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: C
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 17
Refer to the exhibit.
Based on the information provided on the partial Event Monitor page shown in the exhibit, how was the attack detected? (Choose one answer)
Answer: A
Explanation:
The correct answer is D. Automatically by an event handler . The study guide explicitly states that "Event handlers generate events on FortiAnalyzer" and "FortiAnalyzer uses event handlers to filter all incoming logs. If the logs received match the conditions set in the event handlers, FortiAnalyzer generates an event." It also says "You can view all generated events on the Event Monitor page." This directly matches the exhibit, which is showing entries on the Event Monitor page. Therefore, the attack shown there was detected automatically through an event handler .
The guide also explains the detection flow: "FortiAnalyzer receives logs," "FortiAnalyzer parses logs," and "FortiAnalyzer generates an event if a rule is matched in an event handler." In addition, the Event Monitor view includes the Handler column, which identifies the event handler that generated the event. That is why the attack is not considered manually detected, and it is not primarily detected by a playbook or stitch.
Playbooks and stitches are used for subsequent automation actions, but the event appearing in Event Monitor is created by the event handler mechanism.
NEW QUESTION # 18
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 19
......
Our technology and our staff are the most professional. What are the NSEI_OTS_AR-7.6 practice materials worthy of your choice, I hope you spend a little time to find out. First of all, after you make a decision, you can start using our NSEI_OTS_AR-7.6 Exam Questions soon. We will send you an email within five to ten minutes after your payment is successful. You can choose any version of NSEI_OTS_AR-7.6 study guide, as long as you find it appropriate.
Top NSEI_OTS_AR-7.6 Exam Dumps: https://www.prep4surereview.com/NSEI_OTS_AR-7.6-latest-braindumps.html
BTW, DOWNLOAD part of Prep4SureReview NSEI_OTS_AR-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1u10-Y-QeXgjaYWAlJXNkUJJI68aWNRie