2026 Latest Prep4King JN0-352 PDF Dumps and JN0-352 Exam Engine Free Share: https://drive.google.com/open?id=1f5NzlK5HByLghm57kZNVgxUdUU_jcCL-
In the era of information, everything around us is changing all the time, so do the JN0-352 exam. But you don’t need to worry it. We take our candidates’ future into consideration and pay attention to the development of our Enterprise Routing and Switching, Specialist (JNCIS-ENT) study training dumps constantly. Free renewal is provided for you for one year after purchase, so the JN0-352 Latest Questions won’t be outdated. The latest JN0-352 latest questions will be sent to you email, so please check then, and just feel free to contact with us if you have any problem. Our reliable JN0-352 exam material will help pass the exam smoothly.
| Section | Weight | Objectives |
|---|---|---|
| Protocol Independent Routing | 10-15% | - Routing instances and route selection criteria - Routing tables, static routes and route preference - Basic routing policy and filter operation |
| BGP | 15-20% | - Route advertisement, attributes and path selection - Neighbor relationships and session establishment - Routing policies, filtering and common troubleshooting |
| IP Multicast | 5-10% | - IGMP operation and configuration - Multicast routing monitoring and troubleshooting - PIM Dense Mode, Sparse Mode and RP mechanisms |
| IS-IS | 10-15% | - Scalable enterprise deployment and troubleshooting - Adjacency establishment, levels and metrics - Configuration and route exchange |
| Layer 2 Switching and VLANs | 15-20% | - VLAN concepts, configuration, trunking and tagging - Link Aggregation Groups (LAG) and Virtual Chassis - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration |
| Tunnels and Overlays | 5-10% | - Overlay network design and connectivity - GRE, IP-IP and dynamic tunnel configuration - Tunnel types, encapsulation and operation |
| Layer 2 Security | 10-15% | - Port security, MAC limiting and storm control - Layer 2 firewall filters and security features - DHCP snooping, Dynamic ARP Inspection and IP Source Guard |
| High Availability and Resiliency | 5-10% | - Graceful restart and non-stop routing - Redundancy protocols and failover mechanisms - Network resiliency design and troubleshooting |
| OSPF | 15-20% | - Route summarization and redistribution - Configuration, verification and troubleshooting - Neighbor formation, area design and LSA types |
>> New Braindumps JN0-352 Book <<
You will never be afraid of the JN0-352 exam, we believe that our JN0-352 preparation materials will help you change your present life. It is possible for you to start your new and meaningful life in the near future, if you can pass the JN0-352 exam and get the certification. So it is very important for you to prepare for the JN0-352 Practice Exam, you must pay more attention to the JN0-352 certification guide to help you. And our JN0-352 exam questions can give you all the help to obtain the certification.
NEW QUESTION # 105
You want to use filter-based forwarding (FBF) to forward traffic sourced from subnet 10.0.0.0/24 to a specific destination.
Which two routing instance types would enable you to accomplish this task? (Choose two.)
Answer: A,B
NEW QUESTION # 106
An update to your organization's network security requirements document requires management traffic to be isolated in a non-default routing-instance. You want to implement this requirement on your Junos-based devices.
Which two commands enable this behavior? (Choose two.)
Answer: C,D
Explanation:
To isolate management traffic in a non-default routing-instance on Junos-based devices, you can use the set system management-instance and set routing-instances mgmt_junos commands. set system management-instance: This command associates the management interface (usually named fxp0 or em0 for Junos OS, or re0:mgmt-* or re1:mgmt-* for Junos OS Evolved) with the non- default virtual routing and forwarding (VRF) instance. After you configure the non-default management VRF instance, management traffic no longer has to share a routing table with other control traffic or protocol traffic.
set routing-instances mgmt_junos: This command creates a new routing instance named mgmt_junos. The name of the dedicated management VRF instance is reserved and hardcoded as mgmt_junos; you cannot configure any other routing instance by the name mgmt_junos.
Therefore, options C and D are correct. Options A and B are not correct because they attempt to assign an interface to the mgmt_junos routing instance, which is not necessary for isolating management traffic.
NEW QUESTION # 107
You have configured the four EX Series switches with RSTP, as shown in the exhibit. You discover that whenever a link between switches goes up or down, the switches take longer than expected for RSTP to converge, using the default settings.
In this scenario, which action would solve the delay in RSTP convergence?
Answer: A
Explanation:
The exhibit shows the configuration of RSTP on EX-4, which has the command force-version stp.
This command forces the switch to use the legacy STP protocol instead of RSTP, even though the switch supports RSTP. This means that EX-4 will not be able to take advantage of the faster convergence and enhanced features of RSTP, such as edge ports, link type, and proposal/agreement sequence. The other switches in the network are likely to be running RSTP, as it is the default protocol for EX Series switches. Therefore, there will be a compatibility issue between EX-4 and the other switches, which will result in longer convergence times and suboptimal performance. The switch will also generate a warning message that says "Warning:
STP version mismatch with neighbor" when it receives a BPDU from a RSTP neighbor.
To solve this problem, the force-version command must be removed from EX-4, so that it can run RSTP natively and interoperate with the other switches in the network. This will enable faster convergence and better stability for the network topology. To remove the command, you can use the delete protocols rstp force-version command in configuration mode.
NEW QUESTION # 108
You have configured a GRE tunnel. To reduce the risk of dropping traffic, you have configured a keepalive OAM probe to monitor the state of the tunnel; however, traffic drops are still occurring.
Referring to the exhibit, what is the problem?
Answer: D
Explanation:
For GRE tunnel keepalive to function properly, the hold time should be set to at least twice the keepalive interval to ensure proper detection and recovery of the tunnel state. In the exhibit, both keepalive-time and hold-time are set to 10 seconds, which is not optimal. The hold-time should be at least double the keepalive-time value.
So, to fix the issue, you should configure the hold-time to be 20 seconds or more.
NEW QUESTION # 109
Which two multicast IP addresses are used for link-state update packets? (Choose two.)
Answer: C,D
NEW QUESTION # 110
......
The JN0-352 desktop-based practice exam is compatible with Windows-based computers and only requires an internet connection for the first-time license validation. The web-based JN0-352 practice test is accessible on any browser without needing to install any separate software. Finally, the JN0-352 Dumps PDF is easily portable and can be used on smart devices or printed out. We constantly update the JN0-352 pdf file to ensure customers receive the latest version of Juniper JN0-352 questions, based on the actual Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) exam content.
JN0-352 Free Exam Dumps: https://www.prep4king.com/JN0-352-exam-prep-material.html
What's more, part of that Prep4King JN0-352 dumps now are free: https://drive.google.com/open?id=1f5NzlK5HByLghm57kZNVgxUdUU_jcCL-