素晴らしいNSE7_OTS-7.2テスト問題集一回合格-高品質なNSE7_OTS-7.2問題トレーリング

無料でクラウドストレージから最新のFast2test NSE7_OTS-7.2 PDFダンプをダウンロードする：https://drive.google.com/open?id=1Es_LBFO-mcoWnOp94WOwHy63S2sy9iNb

あるFortinetのNSE7_OTS-7.2テストトレントに関しては、Fast2testのNSE7_OTS-7.2ガイドトレントが有効であるかどうかを示す最も強力な証拠となるのはパスレートのみであるため、パスレートが最高の広告になるというのが常識です。有用かどうか。すべてのお客様のフィードバックからの統計によると、NSE7_OTS-7.2テストトレントの指導の下で試験を準備したお客様の間でのNSE7_OTS-7.2試験問題のFortinet NSE 7 - OT Security 7.2合格率は、 98％から100％に達しました。

FortinetのNSE7_OTS-7.2認定資格は、OTセキュリティに特化したITプロフェッショナルにとって貴重な資格です。この認定資格は、候補者がOTネットワークやデバイスを安全に保護するために必要なスキルや知識を持っていることを証明します。この認定は、グローバルに認められ、OTネットワークを管理および維持するための資格を持つ有資格者を求める雇用主に高く評価されています。さらに、Fortinet NSE7_OTS-7.2認定資格は、高度なネットワークセキュリティ概念に焦点を当てたFortinet NSE8認定資格などの上位の認定資格に向けた足がかりになります。

>> NSE7_OTS-7.2テスト問題集 <<

素晴らしいNSE7_OTS-7.2テスト問題集一回合格-ハイパスレートのNSE7_OTS-7.2問題トレーリング

もし君がFortinetのNSE7_OTS-7.2に参加すれば、良い学習のツルを選ぶすべきです。FortinetのNSE7_OTS-7.2認定試験はIT業界の中でとても重要な認証試験で、合格するために良い訓練方法で準備をしなければなりません。。

Fortinet NSE7_OTS-7.2試験の主な目的は、安全なOTネットワークを設計、構成、および管理する能力を測定することです。試験は、リスク評価、脅威検出、およびインシデント対応を含むOTセキュリティの概念に対する受験者の理解をテストします。さらに、試験は、ネットワークセグメンテーション、アクセス制御、およびデータ保護を含むOTネットワーク設計の知識を評価することを目的としています。

Fortinet NSE 7 - OT Security 7.2 認定 NSE7_OTS-7.2 試験問題 (Q23-Q28):

質問 # 23
Refer to the exhibit, which shows a non-protected OT environment.

An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)

A. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
B. Deploy a FortiGate device within each ICS network.
C. Use segmentation
D. Configure firewall policies with web filter to protect the different ICS networks.
E. Configure firewall policies with industrial protocol sensors

正解：B、C、E

質問 # 24
Refer to the exhibit. PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT cannot send traffic to each other. Which two statements about the traffic between PCL-1 and PLC-2 are true? (Choose two.)

A. Micro-segmentation on FGT-2 prevents direct device-to-device communication.
B. FGT-2 controls intra-VLAN traffic through firewall policies.
C. The switch on FGT-2 must be hardware to implement micro-segmentation.
D. Traffic must be inspected by FGT-EDGE in OT networks.

正解：A、B

質問 # 25
Refer to the exhibits. Which statement about some of the generated report elements from FortiAnalyzer is true?

A. The report confirms Modbus and IEC 104 are the key applications crossing the network.
B. FortiGate collects the logs and generates the report to FortiAnalyzer.
C. This report is predefined and is not available for customization.
D. The file types confirm the infected applications on the PLCs.

正解：A

質問 # 26
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic?
(Choose three.)

A. Destination defined as internet services in the firewall policy
B. Lowest to highest policy ID number
C. Source defined as internet services in the firewall policy
D. Services defined in the firewall policy.
E. Highest to lowest priority defined in the firewall policy

正解：A、D、E

解説：
Explanation
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
A: Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
D: Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
E: Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.

質問 # 27
Refer to the exhibit. An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?

A. Set all application categories to apply default actions.
B. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
C. Change the security action of the industrial category to monitor.
D. Set the priority of the C.BO.NA.1 signature override to 1.

正解：D

解説：
The application sensor settings allow you to configure the security action for each application category and network protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection. Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack. The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10. In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category. The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol. The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol. The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol. The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol. The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network. To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.

質問 # 28
......

NSE7_OTS-7.2問題トレーリング: https://jp.fast2test.com/NSE7_OTS-7.2-premium-file.html

P.S. Fast2testがGoogle Driveで共有している無料かつ新しいNSE7_OTS-7.2ダンプ：https://drive.google.com/open?id=1Es_LBFO-mcoWnOp94WOwHy63S2sy9iNb