International Code Council 93-Tall-Mass-Timber-Buildings Exam provided by Prep4sureExam is of the highest quality, and it enables participants to pass the exam on their first try. For successful preparation, it is essential to have good International Code Council 93-Tall-Mass-Timber-Buildings exam dumps and to prepare questions that may come up in the exam. Prep4sureExam helps candidates overcome all the difficulties they may encounter in their exam preparation. To ensure the candidates' satisfaction, Prep4sureExam has a support team that is available 24/7 to assist with a wide range of issues.
| Section | Objectives |
|---|---|
| Tall Mass Timber Building Code Provisions | - Structural and Connection Requirements
- Type IV Construction
|
>> 93-Tall-Mass-Timber-Buildings Pdf Files <<
For candidates who will attend an exam, some practice for it is necessary. 93-Tall-Mass-Timber-Buildings Exam Dumps of us will give you the practice you need. 93-Tall-Mass-Timber-Buildings exam dumps of us contain the knowledge point of the exam. Skilled professionals will verify the questions and answers, which will guarantee the correctness. Besides, we also offer you free update for one year after purchasing, and the update version will send to your email address automatically.
NEW QUESTION # 30
Proprietary nails can be used by referencing which ICC-ES Evaluation Report?
Answer: C
Explanation:
ICC-ES ESR-1539 is the applicable evaluation report, making option C correct. ESR-1539 addresses nails and staples manufactured by participating companies and evaluates their use in engineered and nonengineered structural connections.
An ICC-ES Evaluation Report provides evidence that a proprietary product or system complies with specified building-code requirements where the product does not rely solely on the generic prescriptive provisions of the IBC. For proprietary nails, the report provides the technical basis needed to establish characteristics such as dimensions, materials, recognized structural applications, allowable design values, installation limitations, and conditions of use.
The current ICC-ES document is published as ESR-1539P, reflecting subsequent administrative updates to the report, but the identifying evaluation-report number remains 1539 , matching option C and the examination question.
For special inspection, merely recognizing the ESR number is not enough. The inspector should verify that the installed proprietary fastener is actually included in the report, that its diameter and length correspond to the approved construction documents, and that installation spacing, penetration, orientation, substrate, and other report conditions are satisfied.
References/Topics: ICC-ES ESR-1539, structural nails and staples; proprietary fastener evaluation and installation requirements. ICC-ES states that the nails and staples covered by ESR-1539 are used in engineered and prescriptive structural connections.
NEW QUESTION # 31
Given: A building of Type IV-B construction is designed to be greater than six stories above grade plane.
At least one layer of required noncombustible protection shall be installed on all of the following building elements except _____ on all floor levels more than four levels below active mass timber construction before erecting additional floor levels during construction.
Answer: B
Explanation:
The intended code exception is shafts and vertical exit enclosures , making option B correct. The governing construction-phase provision is 2021 IFC Section 3303.5, which applies to buildings of Types IV-A, IV-B, and IV-C designed to exceed six stories above grade plane.
Where Section 602.4 of the IBC requires noncombustible protection, at least one layer must be installed on building elements located on floor levels-including mezzanines-more than four levels below active mass timber construction before additional floor levels can be erected. The provision is intended to prevent a tall mass timber project from accumulating an excessive number of substantially unprotected combustible stories during erection.
Section 3303.5 expressly states that shafts and vertical exit enclosures are not considered part of the active mass timber construction for application of this construction-progress requirement. Therefore, B is the examination answer.
Mezzanines are expressly included in the protected-level requirement. Required protection for floors, walls, and ceilings under IBC Section 602.4 progresses with construction subject to the IFC provision. The same section also requires standpipes, an approved water supply for fire department operations, and timely installation of required exterior wall coverings.
References/Topics: 2021 IFC Section 3303.5; 2021 IBC Section 602.4; fire safety during construction of tall mass timber buildings.
NEW QUESTION # 32
All of the following combustible elements may be used in mass timber buildings except:
Answer: D
Explanation:
A conventional 2 ร 6 solid-sawn stud is a light-frame member and does not satisfy the minimum cross- sectional dimensions associated with mass timber or heavy-timber construction. Therefore, option A is the exception.
The IBC defines mass timber as Type IV structural elements primarily composed of solid, built-up, panelized or engineered wood products that meet the minimum cross-sectional dimensions required for Type IV construction. A nominal 2 ร 6 stud is substantially smaller than those dimensions and is ordinarily classified as conventional light-frame construction. Its use might be permitted in a particular nonstructural partition or another specifically authorized application, but it is not itself a qualifying mass timber structural element.
CLT is expressly recognized as a mass timber panel product. Parallel-strand lumber is a form of structural composite lumber and can qualify where it satisfies the applicable minimum dimensions, product-standard requirements and approved structural design. Dowel-laminated timber is a built-up panelized timber product and may likewise serve as a mass timber element when its dimensions, engineering and approval satisfy the construction documents and code.
The classification depends on the completed element's dimensions and approved structural function-not merely on the fact that it is manufactured from wood.
References/Topics: 2021 IBC Chapter 2 definitions of "Mass Timber" and "Conventional Light-Frame Construction"; Sections 602.4 and 2304.11.
NEW QUESTION # 33
Where Type X gypsum board serves as noncombustible protection for interior surfaces of wall and ceiling assemblies, all of the following code provisions are correct except:
Answer: A
Explanation:
Option D is the incorrect statement. IBC Section 722.7.2.1 requires the panel edges of the face layer , rather than the base layer, to be taped and finished with joint compound. Fastener heads on the face layer must also be covered with joint compound.
The other three provisions accurately reproduce the code. Each gypsum-board layer must be secured with Type S drywall screws long enough to penetrate the mass timber at least 1 inch when driven flush. Screws for the base layer are installed at 12 inches on center in both directions . Subsequent layers use the same general spacing but are offset from screws in the preceding layer. In addition, the panel edges of each succeeding layer must be offset 18 inches from the panel edges of the previous layer.
These details are not merely workmanship recommendations. They form part of the installation conditions under which the protection contributions in Table 722.7.1(2) can be credited.
References/Topics: 2021 IBC Section 722.7.2.1, Items 1-9; fastening, panel-edge offset, and finishing of Type X gypsum protection.
NEW QUESTION # 34
Refer to the exhibit by clicking on the EXHIBIT button above.
In the detail shown, the 2x2 block is intended for what purpose according to AWC Technical Report 10?
Answer: D
Explanation:
The 2 ร 2 block is intended to protect the abutting wood edges from the effects of char contraction. Therefore, option D is correct.
During fire exposure, wood chars and the char layer can shrink or contract. At an interface between two abutting timber components, that contraction can create a gap that allows heat and flames to penetrate deeper than predicted for a continuous exposed surface. AWC connection-fire-design methodology therefore requires additional protection at susceptible joints and interfaces. The block shields the abutting edges and maintains the sacrificial wood-cover path around the protected connection.
Its primary function is not decorative, nor is it simply an air-sealing component. Although limiting airflow can be a secondary consequence of closing the interface, the design purpose addressed by the technical guidance is control of premature fire penetration caused by char contraction. The block also should not be interpreted independently as a generic one-hour protective membrane for the steel ledger; the connection's total rating depends on the complete approved protection assembly.
The inspector should confirm the block's dimensions, species or product designation, fastening, continuity, and tight installation before the connection is concealed.
References/Topics: AWC Technical Report 10; AWC Fire Design Specification provisions addressing char contraction and gaps between abutting wood members.
NEW QUESTION # 35
......
Nowadays, so many internet professionals agree that International Code Council exam certificate is a stepping stone to the peak of our life. 93-Tall-Mass-Timber-Buildings exam is an exam concerned by lots of internet professionals. Close to 100% passing rate is the best gift that our customers give us. We also hope our 93-Tall-Mass-Timber-Buildings exam materials can help more and more ambitious people pass the 93-Tall-Mass-Timber-Buildings exam. Our professional team checks the update of exam materials every day, so please rest assured that the 93-Tall-Mass-Timber-Buildings Exam software you are using must contain the latest and most information. We are a team of the exam questions providers 93-Tall-Mass-Timber-Buildings exam in internet that ensured you can pass actual test 100%. We have experienced and professional experts to create the latest 93-Tall-Mass-Timber-Buildings exam questions and answers many times which are approach to the 93-Tall-Mass-Timber-Buildings exam.
93-Tall-Mass-Timber-Buildings Preparation Store: https://www.prep4sureexam.com/93-Tall-Mass-Timber-Buildings-dumps-torrent.html