Do not worry because Fortinet NSEI_OTS_AR-7.6 exams are here to provide you with the exceptional Fortinet NSEI_OTS_AR-7.6 Dumps exams. Fortinet NSEI_OTS_AR-7.6 dumps Questions will help you secure the Fortinet NSEI_OTS_AR-7.6 certificate on the first go. As stated above, Fortinet NSE I - OT Security 7.6 Architect resolve the issue the aspirants encounter of finding reliable and original certification Exam Questions.
| Section | Objectives |
|---|---|
| Network Access Control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
| Monitoring and Risk Assessment | - Perform risk assessment and management - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer |
| Asset Management | - Use Fortinet Security Fabric for an OT network - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC |
| Network Security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
>> Reliable NSEI_OTS_AR-7.6 Exam Camp <<
Our NSEI_OTS_AR-7.6 learning materials help you to easily acquire the NSEI_OTS_AR-7.6 certification even if you have never touched the relative knowledge before. With our NSEI_OTS_AR-7.6 exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. You will have higher wages and a better development platform. What are you waiting for? Come and buy NSEI_OTS_AR-7.6 Study Guide now!
NEW QUESTION # 57
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 58
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 59
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 60
Refer to the exhibit.
A partial OT network is shown. You must improve the security of this OT network and implement internal segmentation between network 1 and network 2. How can you achieve the segmentation? (Choose one answer)
Answer: C
Explanation:
The correct answer is D. You can configure forward domain IDs for each network .
The study guide explains that in FortiGate transparent mode, all interfaces belong to the same broadcast domain, even interfaces with different VLAN IDs , and then states that you can "subdivide into multiple broadcast domains" by configuring set forward-domain < domain_ID > . It also states that "interfaces with the same domain ID belong to the same broadcast domain" and, with multiple forward domains,
"traffic arriving on one interface is broadcast only to interfaces in the same forward domain ID." That is the mechanism used to separate internal networks and confine traffic between network segments.
The other options do not fit this requirement. Universal ZTNA is for application access control, not segmentation between two OT networks. One traffic VDOM does not create segmentation by itself; multiple VDOMs would be needed for that type of isolation. An explicit software switch controls intraswitch traffic inside the same software-switch domain, not segmentation between separate networks like network 1 and network 2. Therefore, the correct way to implement the internal segmentation asked in the question is to assign different forward domain IDs to each network.
NEW QUESTION # 61
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 62
......
Time is very important for everyone. As the saying goes, time is life so spend it wisely. We believe that you also don’t want to spend much time on preparing for your Fortinet NSE I - OT Security 7.6 Architect exam. How can you pass your exam and get your certificate in a short time? Our NSEI_OTS_AR-7.6 exam torrent will be your best choice to help you achieve your aim. According to customers’ needs, our product was revised by a lot of experts; the most functions of our Fortinet NSE I - OT Security 7.6 Architect exam dumps are to help customers save more time, and make customers relaxed. If you choose to use our NSEI_OTS_AR-7.6 Test Quiz, you will find it is very easy for you to pass your exam in a short time. You just need to spend 20-30 hours on studying; you will have more free time to do other things.
NSEI_OTS_AR-7.6 Free Download Pdf: https://www.examprepaway.com/Fortinet/braindumps.NSEI_OTS_AR-7.6.ete.file.html