P.S. Free 2026 EDGE EDGE-Expert dumps are available on Google Drive shared by RealExamFree: https://drive.google.com/open?id=1Ql1o6N2PdCQtcAS406uP-2-RSvUryl7q
Our experts offer help by diligently working on the content of EDGE-Expert learning questions more and more accurate. Being an exam candidate in this area, we believe after passing the exam by the help of our EDGE-Expert practice materials, you will only learn a lot from this EDGE-Expert Exam but can handle many problems emerging in a long run. You can much more benefited form our EDGE-Expert study guide. Don't hesitate, it is worthy to purchase!
| Section | Weight | Objectives |
|---|---|---|
| Energy Efficiency | 25% | - Energy Consumption
|
| Software & Methodology | 25% | - Climate Zones & Weather Data
|
| EDGE System Overview | 15% | - EDGE Certification Process
|
| Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
>> EDGE-Expert Valid Exam Format <<
Success in the EDGE EDGE-Expert exam paves the way toward high-paying jobs, promotions, and skills verification. Hundreds of EDGE EDGE-Expert test takers do not get success because of using EDGE EDGE-Expert outdated dumps. Due to failure, they lose money, time, and confidence. All these losses can be prevented by using updated and real EDGE-Expert exam.
NEW QUESTION # 73
When must the registration fee be paid?
Answer: D
Explanation:
The EDGE certification process involves specific steps and fees, including a registration fee, to formally enter a project into the certification system. The EDGE Certification Protocol outlines the timing of the registration fee: "The registration fee must be paid prior to registration of the project in the EDGE system. This fee is required to activate the project in the EDGE App, allowing the Client to begin the self-assessment process and proceed toward certification" (EDGE Certification Protocol, Section 2.1: Registration). Option B, prior to registration, directly matches this requirement, as payment is a prerequisite for starting the certification process. Option A (prior to site audit) is incorrect, as the site audit occurs later, at the post-construction stage:
"The site audit takes place after practical completion, well after registration, so the registration fee is not tied to this stage" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option C (after the registration) is also incorrect, as payment must precede registration: "Registration cannot be completed without payment of the registration fee, ensuring the project is officially entered into the system" (EDGE User Guide, Section 6.1: Project Preparation). Option D (after certification has been awarded) is wrong, as certification occurs at the end of the process, after registration and audits: "Certification fees may be paid after certification, but the registration fee is required at the outset, before any assessment begins" (EDGE Certification Protocol, Section 3.3: Certification Decision). The EDGE User Guide further clarifies: "Paying the registration fee prior to registration ensures that the project is formally recognized by the EDGE system, enabling access to the software and certification resources" (EDGE User Guide, Section 6.1: Project Preparation). Thus, the registration fee must be paid prior to registration (Option B).
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 3.4: Post-Construction Requirements, Section 3.3: Certification Decision; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
NEW QUESTION # 74
Which of the following is a required measure?
Answer: D
Explanation:
In EDGE, certain measures are mandatory to ensure a baseline level of resource efficiency, while others are optional depending on the project's goals. The EDGE User Guide specifies mandatory measures for certification: "To achieve EDGE certification, projects must meet minimum requirements, including mandatory measures such as insulation of the roof to reduce heat gain or loss, ensuring a basic level of energy efficiency across all building typologies in climates where thermal performance is relevant" (EDGE User Guide, Section 4.1: Insulation Measures). Option B, insulation of roof, is identified as a required measure in EDGE, particularly in climates where heating or cooling loads are significant, which applies to most regions.
Option A (green roof) is an optional measure, not mandatory: "Green roofs are an optional measure in EDGE, contributing to energy and water savings but not required for certification" (EDGE User Guide, Section 4.5:
Additional Energy Measures). Option C (lighting controls) is also optional, as EDGE allows flexibility in lighting strategies: "Lighting controls, such as occupancy sensors, are optional measures that can enhance energy savings but are not mandatory" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures).
Option D (efficient lighting for internal areas) is encouraged but not required: "Efficient lighting for internal areas (EEM22) is an optional measure, requiring at least90% of lamps to be efficient, but projects can achieve certification without it if other energy measures meet the 20% savings threshold" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). The EDGE Certification Protocol reinforces this: "Mandatory measures like roof insulation ensure a minimum standard of energy efficiency, while measures like green roofs, lighting controls, and efficient lighting are optional and contribute to overall savings" (EDGE Certification Protocol, Section 2.2: Certification Requirements). Therefore, insulation of the roof (Option B) is the required measure among the options.
Reference:EDGE User Guide Version 2.1, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 4.5: Additional Energy Measures; EDGE Certification Protocol, Section 2.2: Certification Requirements.
NEW QUESTION # 75
An EDGE Auditor is auditing a hospital design for Preliminary Certification. The EDGE Client has included photovoltaics as one of the energy measures resulting in an overall 21% saving in energy. The Auditor observes the photovoltaics are facing the wrong direction. What action should the Auditor take?
Answer: B
Explanation:
The role of an EDGE Auditor is to verify the project's self-assessment as submitted, not to modify or redesign the project. The EDGE Expert and Auditor Protocols clearly define the Auditor's responsibilities: "During an audit, the EDGE Auditor must assess the energy measures as presented in the self-assessment, without altering the design or selections made by the Client. If discrepancies are found, such as incorrect orientation of photovoltaics, the Auditor should note the issue in the audit report but proceed with the assessment as submitted, allowing the Certification Provider to make the final decision" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C, assess the energy measures as they are presented without changing the photovoltaic selection, aligns with this protocol. Option A (contact the design team and suggest a better orientation) oversteps the Auditor's role, as they are not to provide design advice: "Auditors must not engage in design consultancy during an audit to avoid conflicts of interest" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option B (adjust the area of photovoltaic panels) involves modifying the assessment, which is prohibited: "Auditors cannot modify the Client's self-assessment; they must evaluate it as submitted" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (reject photovoltaics and notify the Client) is also incorrect, as Auditors do not have the authority to reject measures outright: "Rejection of measures is the responsibility of the Certification Provider, not the Auditor" (EDGE Certification Protocol, Section 3.3: CertificationDecision). Thus, the Auditor should assess as presented (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision.
NEW QUESTION # 76
A building achieved EDGE certification three years ago and obtained 30% energy savings. Solar panels have been added, which increased the energy savings to 60%. If carbon offsets are purchased for the remainder of the energy use, when should an EDGE Zero Carbon certification application be filed?
Answer: D
Explanation:
EDGE Zero Carbon certification requires specific prerequisites and operational data to verify performance.
The EDGE Certification Protocol details the requirements: "To apply for EDGE Zero Carbon certification, a project must first achieve EDGE Advanced certification, which requires at least 40% energy savings.
Additionally, EDGE Zero Carbon certification mandates at least one year of operational data at 75% occupancy to confirm energy performance, after which carbon offsets can be purchased for the remaining energy use to achieve zero carbon status" (EDGE Certification Protocol, Section 2.3: Certification Levels). In this scenario, the building's energy savings have increased to 60% with solar panels, qualifying it for EDGE Advanced (40% minimum). The next step is to gather one year of operational data before applying for EDGE Zero Carbon, making Option C (after achieving EDGE Advanced certification and gathering one year of operational data) correct. Option A (as soon as one year of operational data) skips the EDGE Advanced requirement: "EDGE Advanced is a prerequisite for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option B (no wait time) is incorrect, as operational data is mandatory:
"Operational data is required to verify performance for Zero Carbon certification" (EDGE User Guide, Section 6.3: Advanced Certifications). Option D (at the same time as EDGE Advanced and after two years) is wrong, as only one year of data is needed: "One year of operational data at 75% occupancy is sufficient for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Thus, Option C is the correct timeline.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications.
NEW QUESTION # 77
In EDGE software, which of the following is a water saving measure?
Answer: C
Explanation:
In the CBCI EDGE curriculum, irrigation strategies are evaluated based on their efficiency in delivering water to plants while minimizing evaporation, runoff, and overspray. Drip irrigation is recognized as a water-saving measure because it delivers water directly to the root zone of plants through a network of low-flow emitters.
This targeted application significantly reduces water losses due to evaporation and wind drift compared to conventional surface watering methods. As a result, drip irrigation reduces overall irrigation demand and contributes to measurable water savings in the EDGE software.
Hose pipe irrigation and conventional sprinkler irrigation are less efficient because they distribute water over a broader area, increasing the likelihood of evaporation and runoff. These systems typically require more water to achieve the same landscaping results. While water efficient landscaping is an important design strategy that reduces irrigation demand through plant selection and site planning, the specific irrigation system recognized as a direct water-saving measure in EDGE among the options provided is drip irrigation.
Therefore, drip irrigation is the correct answer as it aligns with EDGE water efficiency strategies and directly reduces potable water consumption for landscaping.
NEW QUESTION # 78
......
As is known to us, a suitable learning plan is very important for all people. For the sake of more competitive, it is very necessary for you to make a learning plan. We believe that our EDGE-Expert actual exam will help you make a good learning plan. You can have a model test in limited time by our EDGE-Expert Study Materials, if you finish the model test, our system will generate a report according to your performance. And in this way, you can have the best pass percentage on your EDGE-Expert exam.
EDGE-Expert Exam Study Guide: https://www.realexamfree.com/EDGE-Expert-real-exam-dumps.html
BTW, DOWNLOAD part of RealExamFree EDGE-Expert dumps from Cloud Storage: https://drive.google.com/open?id=1Ql1o6N2PdCQtcAS406uP-2-RSvUryl7q