What's more, part of that Pass4sureCert HPE7-A01 dumps now are free: https://drive.google.com/open?id=1ndapTf1ccAw3NDkIM1oyjUbA08YIPIjl
So you rest assured that with the HP HPE7-A01 actual questions you will not only ace the HP HPE7-A01 exam predation but also boost confidence to perform well in the final HP HPE7-A01 test. With the HP HPE7-A01 pdf questions you can experience the type and pattern of the final HPE7-A01 exam. In this way, you will be confident on the day of the Aruba Certified Campus Access Professional Exam HPE7-A01 Exam and solve all the HP HPE7-A01 exam questions. The HP wants to make the HPE7-A01 exam preparation simple and quick. To achieve this objective the HP is offering the top-notch and top-rated HPE7-A01 practice test questions in three user-friendly and compatible formats.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Connectivity & Architecture | 8% | - Connectivity
|
| Topic 2: Monitoring & Management | 6% | - Network Monitoring Tools
|
| Topic 3: WLAN Technologies | 17% | - Wireless LAN Implementation
|
| Topic 4: Troubleshooting | 6% | - Wired and Wireless Troubleshooting
|
| Topic 5: Performance Optimization | 7% | - QoS and Optimization
|
| Topic 6: Authentication & Authorization | 8% | - AAA Configuration
|
| Topic 7: Switching & Layer 2/3 Technologies | 14% | - Campus Switching
|
| Topic 8: Security | 9% | - Network Security
|
| Topic 9: Routing | 13% | - Routing Implementation
|
| Topic 10: Network Fundamentals | 4% | - Network Stack
|
>> New HP HPE7-A01 Practice Materials <<
Our HPE7-A01 exam guide question is recognized as the standard and authorized study materials and is widely commended at home and abroad. Our HPE7-A01 study materials boost superior advantages and the service of our products is perfect. We choose the most useful and typical questions and answers which contain the key points of the test and we try our best to use the least amount of questions and answers to showcase the most significant information. Our HPE7-A01 learning guide provides a variety of functions to help the clients improve their learning. For example, the function to stimulate the exam helps the clients test their learning results of the HPE7-A01 learning dump in an environment which is highly similar to the real exam.
NEW QUESTION # 142
You need to drop excessive broadcast traffic on an ingress port or an ArubaOS-CX switch. What is the best feature to use for this task?
Answer: A
Explanation:
Explanation
According to the Aruba Documentation Portal1, the ArubaOS-CX switch supports various features to control the ingress traffic on specific ports, such as rate limiting, QoS shaping, and access control. These features can help reduce the impact of excessive broadcast traffic on the network performance and availability.
This is because rate limiting is a feature that allows you to limit the inbound or outbound traffic on a port based on a percentage of the port capacity or a fixed amount of bytes per second. Rate limiting can help prevent broadcast storms by reducing the amount of broadcast packets that enter or leave a port
https://www.arubanetworks.com/techdocs/central/latest/content/nms/aos-cx/cfg/conf-cx-access-control.htm 2:
https://community.arubanetworks.com/blogs/esupport1/2021/02/08/broadcast-storm-containment-in-aruba-pvos-
https://techhub.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/15-18/5998-8160_ssw_mcg/content/ch0
NEW QUESTION # 143
For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?
Answer: C
Explanation:
The Aruba CX 6400 switch is a modular switch that supports high-performance and high-density Ethernet switching for campus and data center networks. One of the features that distinguishes the Aruba CX 6400 switch from most typical campus switches is virtual output queueing (VOQ). VOQ is a technique that implements large ingress packet buffers on each port to prevent head-of-line blocking and packet loss due to congestion2. VOQ allows each port to have multiple queues for different output ports and prioritize packets based on their destination and QoS class2. VOQ enables the Aruba CX 6400 switch to achieve high throughput and low latency for various traffic types and scenarios.References: 2
https://www.arubanetworks.com/assets/ds/DS_CX6400Series.pdf
NEW QUESTION # 144
A customer is using stacked Aruba CX 6200 and CX 6300 switches for access and a VSX pair of Aruba CX 8325 as a collapsed core 802.1X is implemented for authentication. Due to the lack of cabling, some unmanaged switches are still in use Sometimes devices behind these switches cause network outages. The switch should send a warning to the helpdesk when the problem occurs. You have been asked to implement an effective solution to the problem.
What is the solution for this?
Answer: C
Explanation:
This is the correct solution to the problem of devices behind unmanaged switches causing network outages due to loops. Loop protection is a feature that allows an Aruba CX switch to detect and prevent loops by sending loop protection packets on each port, LAG, or VLAN on which loop protection is enabled. If a loop protection packet is received by the same switch that sent it, it indicates a loop exists and an action is taken based on the configuration. Loop protection should be configured on all edge ports of the Aruba CX 6200 and CX 6300 switches, which are the ports that connect to end devices or unmanaged switches. The trap-option should be set up to send a warning to the helpdesk when a loop is detected. The other options are incorrect because they either do not configure loop protection or do not set up the trap-option.
NEW QUESTION # 145
A company deployed Dynamic Segmentation with their CX switches and Gateways After performing a security audit on their network, they discovered that the tunnels built between the CX switch and the Aruba Gateway are not encrypted. The company is concerned that bad actors could try to insert spoofed messages on the Gateway to disrupt communications or obtain information about the network. Which action must the administrator perform to address this situation?
Answer: B
Explanation:
To address the situation of unencrypted tunnels between the CX switch and the Aruba Gateway, the administrator must enable Enhanced security on both devices. Enhanced security is a feature that provides encryption and authentication for GRE tunnels between CX switches and Aruba Gateways using IPSec.
Enhanced security can be enabled globally or per tunnel on both devices using CLI commands or Web UI options. The other options are incorrect because they either do not provide encryption or authentication for GRE tunnels or do not exist as features.
NEW QUESTION # 146
With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?
Answer: D
Explanation:
The active gateway feature is used to provide active-active layer 3 default gateway for hosts on the same subnet. It allows the switch to convert multicast streams into unicast streams over the wireless link, which improves the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients. The active gateway feature is unique to VSX configuration because it eliminates the need for VRRP and avoids traffic being pushed over the ISL link, which can cause latency in the network12.
The correct answer to the question is C. Sixteen different VMACs are supported for each IPv4 and IPv6 stack simultaneously. This means that you can have a maximum of eight VMACs for IPv4, and a maximum of eight VMACs for IPv6, on a VSX pair. Only 15 VMACs are supported on 6400 switch series2.
The other options are incorrect because:
A) Sixteen different VMACs are not supported total as shared. They are supported for each IPv4 and IPv6 stack separately.
B) Active gateway can be used without MSTP instances. MSTP is a protocol that allows multiple spanning tree instances to coexist on the same switch, but it does not affect how active gateway works.
D) Active gateway does not copy traffic over the ISL link for an optimized path. It avoids using the ISL link for routed traffic and uses the local switch interface MAC instead of the virtual MAC address (VMAC) for source address1.
NEW QUESTION # 147
......
There may be a lot of people feel that the preparation process for HPE7-A01 exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our HPE7-A01 Exam Materials will radically change this. High question hit rate makes you no longer aimless when preparing for the exam, so you just should review according to the content of our HPE7-A01 study guide prepared for you.
HPE7-A01 Valid Dump: https://www.pass4surecert.com/HP/HPE7-A01-practice-exam-dumps.html
2026 Latest Pass4sureCert HPE7-A01 PDF Dumps and HPE7-A01 Exam Engine Free Share: https://drive.google.com/open?id=1ndapTf1ccAw3NDkIM1oyjUbA08YIPIjl