BONUS!!! Fast2test JN0-336 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1m2QsvnSA457H-fD6MjEzRW5P_cjeybeq
Fast2test의Juniper JN0-336 인증시험덤프는 자주 업데이트 되고, 오래 되고 더 이상 사용 하지 않는 문제들은 바로 삭제해버리며 새로운 최신 문제들을 추가 합니다. 이는 응시자가 확실하고도 빠르게Juniper JN0-336덤프를 마스터하고Juniper JN0-336시험을 패스할수 있도록 하는 또 하나의 보장입니다. 매력만점Juniper JN0-336덤프 강력 추천합니다.
| Section | Objectives |
|---|---|
| SSL Proxy | - SSL inspection concepts
|
| Identity-Aware Security Policies | - Identity concepts
|
| Juniper Advanced Threat Prevention (ATP) Cloud | - Operations
|
| High Availability (HA) Clustering | - Chassis cluster operations
|
| Security Director (Junos Space) | - Management platform
|
| IPsec VPN | - Operations and troubleshooting
|
| Intrusion Detection and Prevention (IDP) | - IDP concepts and architecture
|
Fast2test의 Juniper인증 JN0-336덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는Fast2test의 Juniper인증 JN0-336덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Juniper인증 JN0-336덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
질문 # 24
You are asked to configure your company SRX Series device to use identity-aware security policies.
Information about your Active Directory network is shown in the exhibit.
In this scenario, why must you configure JIMS instead of Active Directory as an identity source?
정답：D
설명：
The correct answer is D. You have too many domain controllers. The exhibit shows 15 Active Directory domain controllers. Juniper's integrated Active Directory identity-source configuration for SRX identity- aware firewall supports a limited number of domain controllers; Juniper documentation states that an SRX Series device can configure a maximum of 10 domain controllers for Active Directory identity-source integration. Because this environment has 15 domain controllers, the direct Active Directory identity-source method exceeds the supported scale and JIMS must be used instead.
Option A is wrong because SRX devices can use Active Directory directly as an identity source; JIMS is not the only possible method. Option B is wrong because 1,500 users does not exceed the relevant identity-source scale shown here; Juniper documentation also notes probe functionality support well above this number.
Option C is wrong because the issue being tested is not the Windows Server version. JIMS is designed for larger identity-aware deployments and can centralize identity collection from Active Directory, domain controllers, Exchange servers, and syslog sources, then provide identity mappings to SRX firewalls. Juniper's JIMS datasheet shows much higher scale, including up to 100 active directories, 25 domains, and 500,000 user entries. Reference topics: Identity-Aware Security Policies, Active Directory identity source limits, JIMS scalability, domain controller scale limitations.
질문 # 25
You administer a JSA host and want to include a rule that sets a threshold for excessive firewall denies and sends an SNMP trap after receiving related syslog messages from an SRX Series firewall.
Which JSA rule type satisfies this requirement?
정답：A
설명：
An offense rule in JSA is designed to aggregate multiple events or log entries based on specified criteria into a single offense, which can then trigger responses such as notifications or actions like sending an SNMP trap. This type of rule is well-suited for scenarios where you need to monitor for patterns or rates of events, such as excessive firewall denies, and take action when these exceed defined thresholds.
Offense rules can analyze both event and flow data, making them highly versatile for comprehensive security monitoring.
질문 # 26
You want to show tabular data for operational mode commands.
In this scenario, which logging parameter will provide this function?
정답：A
설명：
The correct answer is B. count. In Junos security policy configuration, count is the policy parameter used for accounting and tabular operational visibility. Juniper's security policy configuration rules state that accounting and auditing elements can be specified with count and log, while logging itself is enabled at either session-init or session-close.
The operational result is visible through commands such as show security policies hit-count, which displays a table of policy hit counters, including fields such as index, from-zone, to-zone, policy name, policy count, and action. Juniper defines this command as displaying the number of times a security policy rule matches traffic, and the sample output is explicitly tabular. Option A, permit, is an action, not a counter or logging/accounting parameter. Option C, session-init, logs at the beginning of a session, and option D, session-close, logs at session teardown. Those two parameters generate logs, but they do not provide the tabular policy-count view being asked about. Reference topics: security policy accounting, count parameter, hit-count, operational-mode policy monitoring, session-init/session-close logging.
질문 # 27
Which two statements are correct about Juniper Secure Connect? (Choose two.)
정답：B,D
설명：
The correct answers are B and C. Juniper Secure Connect uses route-based VPN connectivity, not policy- based VPN connectivity. Juniper's Secure Connect user guide contrasts Dynamic VPN and Juniper Secure Connect and identifies Juniper Secure Connect as using route-based VPN connectivity, with a tunnel interface selected or created to bind the VPN. This is why SRX configurations for Juniper Secure Connect use an st0 tunnel interface and routing/security policy logic, rather than policy-based encryption tied directly to individual firewall policies.
Option B is also correct because Juniper Secure Connect can use a self-signed certificate. Juniper's certificate deployment guidance states that before deploying Juniper Secure Connect, the SRX should use an appropriate certificate, which can be a signed certificate, a self-signed certificate, or a Let's Encrypt-signed certificate.
The documentation also shows generating a self-signed certificate and binding it to the SRX for Secure Connect use.
Option A is wrong because policy-based VPN describes older Dynamic VPN behavior, not Juniper Secure Connect. Option D is directly contradicted by Juniper's certificate guidance. Reference topics: Juniper Secure Connect, route-based VPN, st0 tunnel interface, certificate deployment, self-signed certificate support.
질문 # 28
How does the SSL proxy detect if encryption is being used?
정답：C
설명：
The SSL proxy can detect if encryption is being used by looking at the destination port number of the packet. If the port number is 443, then the proxy can assume that the packet is being sent over an encrypted connection. If the port number is different, then the proxy can assume that the packet is not encrypted. For more information, please refer to the Juniper Networks JNCIS-SEC Study Guide.
질문 # 29
......
많은 사이트에서 Juniper인증 JN0-336시험대비덤프를 제공해드리는데Fast2test를 최강 추천합니다. Fast2test의Juniper인증 JN0-336덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는Fast2test에 있습니다.
JN0-336유효한 덤프문제: https://kr.fast2test.com/JN0-336-premium-file.html
BONUS!!! Fast2test JN0-336 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1m2QsvnSA457H-fD6MjEzRW5P_cjeybeq