It is known to us that getting the AZ-802 certification is not easy for a lot of people, but we are glad to tell you good news. The study materials from our company can help you get the AZ-802 certification in a short time. Now we are willing to introduce our AZ-802 practice questions to you in detail, we hope that you can spare your valuable time to have a look to our AZ-802 Exam questoins. Please believe that we will not let you down. You can just free download the demo of our AZ-802 training guide on the web to know the excellent quality.
| Section | Objectives |
|---|---|
| Monitoring and troubleshooting | - System monitoring
|
| Implement and manage high availability | - Load balancing and redundancy
|
| Secure Windows Server hybrid infrastructures | - Security configuration
|
| Networking and storage infrastructure | - Storage management
|
| Manage hybrid compute and virtualization | - Virtual machines
|
| Disaster recovery and migration | - Backup and restore
|
We will be happy to assist you with any questions regarding our products. Our Microsoft AZ-802 practice exam software helps to prepare applicants to practice time management, problem-solving, and all other tasks on the standardized exam and lets them check their scores. The Microsoft AZ-802 Practice Test results help students to evaluate their performance and determine their readiness without difficulty.
NEW QUESTION # 457
You need to meet the technical requirements for VM3. On which volume can you enable Data Deduplication?
Answer: C
Explanation:
Data Deduplication is a Windows Server file-and-storage feature that can only be enabled on NTFS-formatted data volumes; it cannot be enabled on the operating system (boot/system) volume, and it does not support ReFS or FAT/exFAT volumes at all. VM3 ' s volumes are C (NTFS, the operating system volume), D (NTFS, a data volume), E (ReFS), and F (exFAT). Volume C is excluded because Deduplication is never supported on the volume that hosts the operating system, even though its file system is NTFS. Volume E is excluded because Data Deduplication has no ReFS support in general-purpose deployments; ReFS uses its own separate storage-efficiency mechanisms such as block cloning, not the Deduplication feature. Volume F is excluded because exFAT is a lightweight file system with no support for Windows Server roles or features such as Deduplication, which depends on NTFS-specific metadata structures. That leaves volume D as the only NTFS data volume that is neither the boot volume nor formatted with an unsupported file system, so it is the only volume on which Data Deduplication can currently be enabled, making option C correct.
NEW QUESTION # 458
You have three servers named Server1, Server2, and Server3 that run Windows Server and have the Hyper-V server role installed. Server1 hosts an Azure Migrate appliance named Migrate1. You plan to migrate virtual machines to Azure. You need to ensure that any new virtual machines created on Server1, Server2, and Server3 are available in Azure Migrate. What should you do?
Answer: D
Explanation:
The Azure Migrate appliance only continuously discovers the specific hosts and clusters that have been explicitly registered with it as discovery sources through the appliance ' s own configuration manager; it does not automatically expand its discovery scope to cover additional Hyper-V hosts on the network just because they exist. Migrate1 is currently hosted on Server1, but for virtual machines created on Server2 and Server3 to also show up and be tracked in Azure Migrate alongside those on Server1, an administrator must explicitly add Server2 and Server3, or their respective Hyper-V hosts, as additional discovery sources on Migrate1, which causes the appliance to begin enumerating and continuously tracking their virtual machine inventory as well. Creating a GlobalName zone on the DNS server, setting the Computer Browser service ' s startup type to Automatic, and deploying a WINS server are all legacy NetBIOS name-resolution mechanisms from an earlier era of Windows networking, and none of them has any role whatsoever in how the Azure Migrate appliance discovers hosts or virtual machines. Therefore, adding a discovery source on Migrate1 is the correct action to take.
NEW QUESTION # 459
Your network contains an Active Directory Domain Services (AD DS) domain.
The domain contains three servers named DHCP1, DHCP2, and DHCP3 that run Windows Server and have the DHCP Server role installed. The servers host IPv4 scopes only. Shared storage is unavailable.
Your company has a main datacenter that contains DHCP1 and DHCP2. The company has a disaster-recovery datacenter that contains DHCP3 and connects to the main datacenter by using a WAN link.
You have two scopes named Scope1 and Scope2.
You need to provide DHCP service continuity for the scopes. The solution must meet the following requirements:
* Scope1: DHCP3 must provide leases only if a DHCP server in the a main datacenter is unavailable.
* Scope2: DHCP! and DHCP2 must each lease from separate parts of the IP address range. DHCP2 must wait before responding to client computer requests.
How should you configure high availability for each scope? To answer, drag the appropriate configurations to the correct scopes. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Scope1: DHCP failover in hot standby mode. Scope2: A split scope that uses delayed responses.
DHCP failover in hot standby mode designates one partner as active, normally answering all client requests for a scope, while the second partner remains passive and only begins leasing addresses once it detects the active partner is unavailable, which exactly matches Scope1 ' s requirement that DHCP3 (in the disaster- recovery site) leases addresses only when a main-datacenter server is down; hot standby is also the mode Microsoft recommends specifically for main-site-to-DR-site failover pairings, as opposed to load-balance mode, which splits live traffic between both partners simultaneously and is intended for two servers on the same local, low-latency network segment. Scope2 ' s requirement, that DHCP1 and DHCP2 each lease from separate parts of the address range with DHCP2 waiting before responding, describes the classic split-scope configuration, in which the address range is divided (commonly 80/20) between two independent, non- partnered DHCP servers, and a delay is configured on one server ' s scope options so it only replies to a DHCPDISCOVER broadcast if the other, undelayed server fails to respond first; this delayed-response split scope predates the failover feature and is still used when two DHCP servers should operate independently rather than as a coordinated failover pair. Neither scope ' s requirement matches a DHCP Server role in a failover cluster (which addresses a single server ' s own availability, not multi-server address partitioning) or a single server with exclusion ranges (only one server involved).
NEW QUESTION # 460
You need to meet the technical requirements for VM2. What should you do?
Answer: A
Explanation:
The stated problem is that when an administrator connects to VM2 ' s console through Virtual Machine Connection and disconnects without signing out, a second administrator who opens the console can silently inherit that still-signed-in session without ever supplying credentials. By default, VMConnect attaches directly to the raw console of the guest, which behaves like walking up to a physical, unlocked machine.
Enhanced Session Mode changes this behavior by routing the VMConnect session over the Remote Desktop Protocol into the guest, which means every connection is treated as a new interactive Remote Desktop logon and therefore always prompts for credentials, eliminating the ability to passively inherit someone else ' s open session. Enabling Enhanced Session Mode requires both host-side and guest-side support (the guest operating system must support RDP and have the setting enabled) but is the direct, purpose-built fix for this exact console-sharing problem. The Guest Services integration component only enables basic file-copy functionality between host and guest and has no effect on console/session behavior. Credential Guard protects locally stored credentials from theft using virtualization-based security, and shielded VMs protect a VM ' s disk, state, and console from a compromised or malicious fabric administrator; neither addresses console session takeover between two legitimate administrators. Enhanced Session Mode is therefore the correct solution.
NEW QUESTION # 461
You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with a Microsoft Entra tenant. You have several Windows devices that are Microsoft Entra hybrid joined. You need to ensure that when users sign in to the devices, they can use Windows Hello for Business. Which optional feature should you select in Microsoft Entra Connect?
Answer: C
Explanation:
For hybrid-joined devices using a hybrid key trust or hybrid certificate trust Windows Hello for Business deployment model, the on-premises AD DS domain controllers need visibility of the device objects that Microsoft Entra ID has registered for hybrid join, so that the domain controller can validate the device during Kerberos authentication as part of the Windows Hello for Business sign-in flow. Device writeback, an optional Microsoft Entra Connect feature, writes those Microsoft Entra-registered device objects back into the on-premises AD DS forest, which is the specific prerequisite this hybrid Windows Hello for Business scenario depends on. Group writeback instead synchronizes cloud-created Microsoft 365 and security groups back to on-premises AD and has no relationship to device sign-in. Password writeback lets cloud-initiated self-service password resets be written back to on-premises AD DS, which is unrelated to Windows Hello for Business enrollment. Directory extension attribute sync and Microsoft Entra app and attribute filtering both control which custom attributes or objects are included in synchronization scope and do not affect device authentication capabilities. Device writeback is therefore the correct optional feature to enable.
NEW QUESTION # 462
......
IT exam become more important than ever in today's highly competitive world, these things mean a different future. Microsoft AZ-802 exam will be a milestone in your career, and may dig into new opportunities, but how do you pass Microsoft AZ-802 Exam? Do not worry, help is at hand, with Real4dumps you no longer need to be afraid. Real4dumps Microsoft AZ-802 exam questions and answers is the pioneer in exam preparation.
New AZ-802 Test Dumps: https://www.real4dumps.com/AZ-802_examcollection.html