참고: Itexamdump에서 Google Drive로 공유하는 무료 2026 CIPS L4M7 시험 문제집이 있습니다: https://drive.google.com/open?id=1TjYlLQ3JgfIaHH1j2f2GGNPt5LBlppCt
L4M7는CIPS의 인증시험입니다.L4M7인증시험을 패스하면CIPS인증과 한 발작 더 내디딘 것입니다. 때문에L4M7시험의 인기는 날마다 더해갑니다.L4M7시험에 응시하는 분들도 날마다 더 많아지고 있습니다. 하지만L4M7시험의 통과 율은 아주 낮습니다.L4M7인증시험준비중인 여러분은 어떤 자료를 준비하였나요?
| Section | Objectives |
|---|---|
| Topic 1: Disposal and End-of-Life Management | - Asset disposal strategies
|
| Topic 2: Risk and Value Management | - Managing asset-related risk
|
| Topic 3: Understanding Asset Management | - Principles of whole life asset management
|
| Topic 4: Operation and Maintenance | - Asset performance and reliability
|
| Topic 5: Asset Acquisition and Procurement | - Sourcing and procurement of assets
|
Itexamdump는 엘리트한 전문가들의 끊임없는 연구와 자신만의 노하우로 CIPS L4M7덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다. 기존의 CIPS L4M7시험문제를 분석하여 만들어낸 CIPS L4M7덤프의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. CIPS L4M7덤프는 합격보장해드리는 고품질 덤프입니다. Itexamdump의 덤프를 장바구니에 넣고 페이팔을 통한 안전결제를 진행하여 덤프를 다운받아 시험합격하세요.
질문 # 39
Which one of the following statements is true about radio frequency identification (RFID)?
정답：A
설명：
Radio frequency identification (RFID) are items which use radio technology to identify itself and its location subject to having appropriate hardware and software.
RFID tags are made of three different components: an RFID chip, which is an integrated circuit (IC), an antenna, and a substrate.
A RFID Reader is a device that uses radio-frequency waves to wirelessly transfer data between itself and a RFID tag/label in order to identify, categorize and track assets. When combined with the right RFID software, a RFID reader can identify objects quicker, more accurately, at a reduced overall cost, and at various points of the object's lifecycle.
Passive RFID systems use tags with no internal power source and instead are powered by the electromagnetic energy transmitted from an RFID reader. Passive RFID tags are used for applica-tions such as access control, file tracking, race timing, supply chain management, smart labels, and more.
Active RFID systems have three essential parts - a reader or interrogator, antenna, and a tag. Ac-tive RFID tags possess their own power source - an internal battery that enables them to have ex-tremely long read ranges as well as large memory banks.
Reference: CIPS study guide page 49-50
LO 1, AC 1.2
질문 # 40
Which of the following statements about radio frequency identification (RFID) is NOT true?
정답：A
설명：
RFID tags have very limited range. The following table was extracted from Wikipedia:
RFID tags can be used to do the following:
- Track individual items
- Track boxes of products, cages of products and pallet
- Track containers with multiple loads
- Locate equipment within a building
- Trigger alarms should equipment or stock be removed without authorisation.
RFID tags are made of three different components: an RFID chip, which is an integrated circuit (IC), an antenna, and a substrate. RFID chips are very small integrated circuit incorporating a small memory capability
- many are smaller than 2mm square and 2mm thick. Despite its size, many can hold 2000 characters of data.
Many retailers simply use the tag as a thick label and print both sides with product information and perhaps a barcode.
It is important to note that there are multiple standards in use for RFID - some of these are standardised for industries but there are also national standards in operations. These standards need to be investigated before investment as not all readers work with all cards. GS1 is a non-for-profit organisation which make the standards for barcodes and RFID.
질문 # 41
The ABC approach involves classifying inventory items by unit cost, with expensive items classi-fied as 'A' items and low cost items classified as 'C' items. Is this statement true?
정답：A
설명：
ABC analysis is an approach for classifying inventory items based on the items' consumption val-ues. Consumption value is the total value of an item consumed over a specified time period, for example a year. The approach is based on the Pareto principle to help manage what matters and is applied in this context:
- A items are goods where annual consumption value is the highest. Applying the Pareto principle (also referred to as the 80/20 rule where 80 percent of the output is determined by 20 percent of the input), they comprise a relatively small number of items but have a relatively high consumption value. So it's logical that analysis and control of this class is relatively intense, since there is the greatest potential to reduce costs or losses.
- B items are interclass items. Their consumption values are lower than A items but higher than C items. A key point of having this interclass group is to watch items close to A item and C item classes that would alter their stock management policies if they drift closer to class A or class C. Stock management is itself a cost. So there needs to be a balance between controls to protect the asset class and the value at risk of loss, or the cost of analysis and the potential value returned by reducing class costs. So, the scope of this class and the inventory management policies are determined by the estimated cost-benefit of class cost reduction, and loss control systems and processes.
- C items have the lowest consumption value. This class has a relatively high proportion of the total number of lines but with relatively low consumption values. Logically, it's not usually cost-effective to deploy tight inventory controls, as the value at risk of significant loss is relatively low and the cost of analysis would typically yield relatively low returns.
LO 2, AC 2.1
질문 # 42
Which of the following refer to material used for filling the void left in the box but they have poor environmental profile?
정답：B
설명：
Void filling is the general term giving to the challenge of filling the space left in a box after the products have been packed. This means that if there is no void filling material, the product inside can move around and could be damaged. Materials to fill voids to secure contents
* Polystyrene (PS) is a synthetic aromatic hydrocarbon polymer made from the monomer known as styrene.
[5] Polystyrene can be solid or foamed. General-purpose polystyrene is clear, hard, and rather brittle. It is an inexpensive resin per unit weight. It is a rather poor barrier to oxygen and water vapour and has a relatively low melting point.[6] Polystyrene is one of the most widely used plastics, the scale of its production being several million tonnes per year.[7] Polystyrene can be naturally transparent, but can be coloured with colourants. Uses include protective packaging (such as packing peanuts and CD and DVD cases), containers, lids, bottles, trays, tum-blers, disposable cutlery[6] and in the making of models. Polystyrene is generally considered to be non-biodegradable. However, certain organisms are able to degrade it, albeit very slowly.
* Chips made of bio-degradable materials
* Absorbent and fire-resistant material
* Shredded paper, cardboard or wood-Based material
* Paper or cardboard rolls
* Bubble wrap
* Air-filled cushions
* Self expanding foam
Straps are used to group items into unit load. Polypropylene or polyester are the materials most often used.
The wider the strap, the stronger it will be. Using more than one strap and straps for length and width will create a strong place for stock.
질문 # 43
Which of the following code systems is commonly used by governments as a basis for their Cus-toms tariffs and for the collection of international trade statistics?
정답：A
설명：
The Harmonized Commodity Description and Coding System, also known as the Harmonized System (HS) of tariff nomenclature is an internationally standardized system of names and numbers to classify traded products. It came into effect in 1988 and has since been developed and maintained by the World Customs Organization (WCO) (formerly the Customs Co-operation Council), an independent intergovernmental organization based in Brussels, Belgium, with over 200 member countries.
The Global Trade Item Number (GTIN) is an identifier for trade items, developed by GS1. Such identifiers are used to look up product information in a database (often by entering the number through a barcode scanner pointed at an actual product) which may belong to a retailer, manufacturer, collector, researcher, or other entity.
The Global Location Number can be used by companies to identify their locations, giving them complete flexibility to identify any type or level of location required.
The International Mobile Equipment Identity (IMEI) is a number, usually unique, to identify 3GPP and iDEN mobile phones, as well as some satellite phones.
Reference:
LO 1, AC 1.2
질문 # 44
......
Demo를 다운받아CIPS L4M7덤프의 일부분 문제를 체험해보시고 구매하셔도 됩니다. 저희 Itexamdump에서는CIPS L4M7덤프의 일부분 문제를 샘플로 제공해드립니다. 덤프만 열공하시면CIPS L4M7시험패스가 가능하기에 저희 자료를 선택한걸 후회하지 않게 할 자신이 있습니다.
L4M7시험패스 가능한 인증덤프: https://www.itexamdump.com/L4M7.html
그리고 Itexamdump L4M7 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1TjYlLQ3JgfIaHH1j2f2GGNPt5LBlppCt