그리고 Itexamdump NSE5_FSW_AD-7.6 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1ux_eX2odzp2Jp5AUV0nkoEMeL9Zv1RBP
NSE5_FSW_AD-7.6는Fortinet의 인증시험입니다.NSE5_FSW_AD-7.6인증시험을 패스하면Fortinet인증과 한 발작 더 내디딘 것입니다. 때문에NSE5_FSW_AD-7.6시험의 인기는 날마다 더해갑니다.NSE5_FSW_AD-7.6시험에 응시하는 분들도 날마다 더 많아지고 있습니다. 하지만NSE5_FSW_AD-7.6시험의 통과 율은 아주 낮습니다.NSE5_FSW_AD-7.6인증시험준비중인 여러분은 어떤 자료를 준비하였나요?
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 5 FortiSwitch 7.6 Administrator |
| Exam Number: | NSE5_FSW_AD-7.6 |
| Certificate Validity Period: | 2 years |
| Related Certifications: | Fortinet NSE 5 Network Security Analyst Fortinet NSE 4 FortiGate Administrator |
| Passing Score: | 70% |
| Available Languages: | English |
| Real Exam Qty: | 30-40 |
| Exam Duration: | 70 minutes |
| Exam Price: | $200 USD (varies by region) |
| Exam Format: | Multiple choice, Multiple select |
| Recommended Training: | Fortinet Network Security Expert (NSE) Training Path FortiSwitch 7.6 Administrator Course |
| Exam Registration: | Fortinet Training Institute Fortinet Certification Portal |
| Sample Questions: | Fortinet NSE5_FSW_AD-7.6 Sample Questions |
| Exam Way: | Online proctored or onsite via Pearson VUE testing centers |
| Pre Condition: | Recommended: Fortinet NSE 4 certification or equivalent networking knowledge |
| Official Syllabus URL: | https://www.fortinet.com/training/certification |
>> NSE5_FSW_AD-7.6최신버전 공부자료 <<
Fortinet NSE5_FSW_AD-7.6인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 Itexamdump의 인증시험덤프를 구매하는 방법 등이 있습니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
질문 # 75
Refer to the exhibit.
The security port policy is configured as shown in the exhibit. Which behavior occurs if a device connected to the port that does not support 802.1X? (Choose one answer)
정답：C
설명：
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the interaction between a managed switch and a connected endpoint depends on whether the endpoint can participate in the 802.1X authentication process. When a security policy is applied to a port, the switch sends EAP (Extensible Authentication Protocol) requests to the device to initiate the login.
The FortiSwitch handles two primary failure scenarios differently:
* Non-supplicant (No 802.1X Support):If a device, such as a legacy PC or a basic printer, does not have an 802.1X supplicant, it will not respond to the switch's EAP requests. In this case, the switch waits for the duration specified in theGuest authentication delayfield (30 seconds in the exhibit). Once this timer expires without a response, the switch places the device into theGuest VLAN. As shown in the exhibit, the Guest VLAN is explicitly set to"onboarding.fortilink (onboarding)".
* Authentication Failure:If a devicedoessupport 802.1X but the user provides incorrect credentials, the RADIUS server returns an Access-Reject message. In this scenario, the device is moved to the Authentication fail VLAN, which the exhibit identifies as"quarantine.fortilink (quarantine)".
Note:BecauseMAC authentication bypass (MAB)is disabled in the exhibit, the switch will not attempt to authenticate the device's MAC address against the RADIUS server before defaulting to the Guest VLAN.
Therefore, for any device lacking an 802.1X supplicant, the result is placement into theonboardingVLAN.
질문 # 76
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports, and these ports are connected to endpoints which are powered by PoE.
Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?
정답：C
설명：
To cause endpoints to exchange PoE information and negotiate power with the managed FortiSwitch via LLDP, you should configure the LLDP profile to include power management in the advertised LLDP-MED TLVs. Here are the steps:
* Access the LLDP Profile Configuration:Start by entering the LLDP profile configuration mode with the command:
config switch-controller lldp-profile
edit "LLDP-PROFILE"
* Enable MED-TLVs:Ensure that MED-TLVs (Media Endpoint Discovery TLVs) are enabled. These TLVs are used for extended discovery relating to network policies, including PoE, and are essential for PoE negotiation. They include power management which is crucial for the negotiation of PoE parameters between devices. The command to ensure network policies are set might look like:
set med-tlvs network-policy
* Add Power Management TLV:Specifically add or ensure the power management TLV is part of the configuration. This will advertise the PoE capabilities and requirements, enabling dynamic power allocation between the FortiSwitch and the connected devices (like VoIP phones or wireless access points). This can typically be done within the network-policy settings:
config med-network-policy
edit <policy_index>
set poe-capability
next
end
* Save and Apply Changes:Exit the configuration blocks properly ensuring changes are saved:
End
* Verify Configuration:It's always good practice to verify that your configurations have been applied correctly. Use the appropriateshoworgetcommands to review the LLDP profile settings.
By adding the power management as part of LLDP-MED TLVs, the FortiSwitch will be able to communicate its power requirements and capabilities to the endpoints, thereby facilitating a dynamic power negotiation that is crucial for efficient PoE utilization.
References:For more detailed information and additional configurations, you can refer to the FortiSwitch Managed Switches documentation available on Fortinet's official documentation site:Fortinet Product Documentation
질문 # 77
Refer to the exhibit.
Port24 is the only uplink port connected to the network where you need access to FortiSwitch management services. However, FortiSwitch is not accessible on its management interface with IP address 10.0.13.3.
Based on the configuration shown in the exhibit, which two actions should you take to fix the issue and access FortiSwitch? (Choose two answers)
정답：A,C
설명：
According to theFortiSwitchOS 7.6 Administration Guide (Page 320), management traffic on a FortiSwitch is associated with a specific logical interface, which in this case is the " internal " interface. The exhibit shows that the " internal " interface is configured onVLAN 4094(both as native and allowed). This means that for any management traffic (such as HTTPS, SSH, or SNMP) to reach the switch CPU, it must be able to traverse the physical uplink on VLAN 4094.
However, the configuration forport24(the uplink) is currently restricted. It is set withnative VLAN 100and an allowed-vlans list that only includes100 and 200. Because VLAN 4094 is not included in the allowed list of port24, all frames belonging to the management VLAN (4094) are dropped by the switch ' s ingress/egress filters on the uplink.
To resolve this and restore management access, the administrator has two valid configuration paths based on the provided options:
* Option B:Change thenative VLAN on port24 to VLAN 4094. By making 4094 the native VLAN, untagged management traffic can traverse the port, effectively allowing the " internal " interface to communicate with the network.
* Option D:Add VLAN 4094 to the allowed VLANs on port24. This ensures that VLAN 4094 is no longer filtered out, allowing management frames to pass through the uplink while maintaining the current native VLAN for other traffic.
Option C is irrelevant as removing a working VLAN (200) does not help the management traffic. While Option A describes an alternate architectural approach (moving management into an already-allowed VLAN), Options B and D represent the direct fixes for the mismatch described in the 7.6 administration documentation.
질문 # 78
To enhance service in emergency situations, to which LLDP-MED Type-Length-Values does Forti-Switch advertise to IP phones?
정답：B
설명：
Location (C): FortiSwitch uses LLDP-MED (Link Layer Discovery Protocol - Media Endpoint Discovery) to advertise various attributes to IP phones, among which "Location" is crucial in emergency situations. This information helps emergency responders to determine the physical location of the calling device, which is vital for prompt response in critical situations.
질문 # 79
What are two ways in which automatic MAC address quarantine works on FortiSwitch? (Choose two.)
정답：A,B
설명：
Reference: FortiSwitch 7.2 Study Guide, page 263
질문 # 80
......
NSE5_FSW_AD-7.6합격보장 가능 인증덤프: https://www.itexamdump.com/NSE5_FSW_AD-7.6.html
참고: Itexamdump에서 Google Drive로 공유하는 무료, 최신 NSE5_FSW_AD-7.6 시험 문제집이 있습니다: https://drive.google.com/open?id=1ux_eX2odzp2Jp5AUV0nkoEMeL9Zv1RBP