The number of questions of the NSE6_FNC_AD-7.6 study materials you have done has a great influence on your passing rate. As for our study materials, we have prepared abundant exercises for you to do. You can take part in the real NSE6_FNC_AD-7.6 exam after you have memorized all questions and answers accurately. Also, we just pick out the most important knowledge to learn. Through large numbers of practices, you will soon master the core knowledge of the NSE6_FNC_AD-7.6 Exam. It is important to review the questions you always choose mistakenly. You should concentrate on finishing all exercises once you are determined to pass the NSE6_FNC_AD-7.6 exam.
| Section | Objectives |
|---|---|
| Topic 1: Deployment and Provisioning | - Configure access control on FortiNAC-F - Configure and monitor high availability (HA) - Configure security automation - Configure FortiNAC-F security policies |
| Topic 2: Network Visibility and Monitoring | - Troubleshoot network devices and device status - Use logging options available on FortiNAC - Guests and contractors - Explain and configure device profiling |
| Topic 3: Integration | - Integrate with third-party devices using Syslog and SNMP trap input - Explain and configure MDM integration - Configure and use FortiNAC-F Manager |
| Topic 4: Concepts and Initial Configuration | - Explain isolation networks and the configuration wizard - Model and organize infrastructure devices |
>> Reliable NSE6_FNC_AD-7.6 Test Sims <<
The NSE6_FNC_AD-7.6 exam materials is a dump, maybe many candidates will worry about how to payment and whether it is safe when pay for it. Some people may think that online shopping is not safe. Now I will tell you responsibly that our payment method of NSE6_FNC_AD-7.6 exam materials is very secure. The payment method we use is credit card payment, not only can we guarantee your security of the payment, but also we can protect your right and interests. As for the safety issue of NSE6_FNC_AD-7.6 Exam Materials you are concerned about is completely unnecessary. You can rest assured to buy and use it.
NEW QUESTION # 67
During the testing of a newly modeled infrastructure switch, the administrator is not seeing hosts as they connect or move from one port to another.
What would cause this issue?
Answer: B
Explanation:
FortiNAC-F relies on correctly configured MAC notification (link) traps to detect hosts connecting or moving between ports in real time. If these traps are misconfigured, the system will not receive port-level MAC change events, so newly connected or moved hosts will not be detected as expected.
NEW QUESTION # 68
While deploying FortiNAC-F devices in a 1+1 HA configuration, the administrator has chosen to use the shared IP address option.
Which condition must be met for this type of deployment?
Answer: A
Explanation:
In a1+1 High Availability (HA)deployment, FortiNAC-F supports two primary methods for management access: individual IP addresses or aShared IP Address(also known as a Virtual IP or VIP). The Shared IP option is part of aLayer 2 HAdesign, which simplifies administration by providing a single URL or IP that always points to whichever appliance is currently in the " Active " or " In Control " state.
For a Shared IP configuration to function correctly, thePrimary and Secondary administrative interfaces (port1) must be on the same subnet. This requirement exists because the Shared IP is a logical address that is dynamically assigned to the physical interface of the active unit. Since only one unit can own the IP at a time, both units must reside on the same broadcast domain (Layer 2) to ensure that ARP requests for the Shared IP are correctly answered and that the gateway remains reachable regardless of which unit is active. If the appliances were on different subnets (a Layer 3 HA design), a shared IP could not be used because it cannot " float " across different network segments; instead, administrators would need to manage each unit via its unique physical IP or use a FortiNAC Manager.
" For L2 HA configurations, click theUse Shared IP Addresscheckbox and enter the Shared IP Address information...If your Primary and Secondary Servers are not in the same subnet, do not use a shared IP address.The shared IP address moves between appliances during a failover and recovery and requires both units to reside on the same network. " -FortiNAC-F High Availability Reference Manual: Shared IP Configuration.
NEW QUESTION # 69
An administrator wants to continually monitor endpoints for the existence of a specific registry key and the status of a required security service.
Which two requirements must be in place for the administrator to use FortiNAC-F compliance monitors? (Choose two.)
Answer: B,C
Explanation:
Compliance monitors require the persistent agent to continuously evaluate endpoint conditions such as registry keys and service status. A custom scan must be defined to specify the exact registry key and security service checks that the monitor will assess on the endpoint.
NEW QUESTION # 70
Refer to the exhibits.
An administrator is troubleshooting visibility issues on a modeled switch. The switch is configured to use link traps and to provision hosts based on network access policies. The administrator is seeing hosts on ports with no hosts connected and not seeing hosts on ports where hosts are known to be connected.
What is the most likely cause?
Answer: B
Explanation:
Incorrect switch credentials prevent FortiNAC-F from successfully performing SNMP-based polling (such as layer 2 host learning) needed to accurately learn and clear hosts per port. As a result, FortiNAC-F displays stale or missing host-to-port associations even though link traps are enabled.
NEW QUESTION # 71
When creating a user or host profile, which three criteria can you apply? (Choose three.)
Answer: A,B,E
Explanation:
TheUser/Host Profileis the primary mechanism in FortiNAC-F for identifying and categorizing endpoints to determine their level of network access. According to theFortiNAC-F Administration Guide, a profile is built using a combination of criteria that define " Who " is connecting, " What " device they are using, and " Where
" they are located on the network.
The three main categories of criteria available in the configuration are:
Host or User Attributes (B):This includes specific details such as the host ' s operating system, the user ' s role (e.g., Employee, Contractor), or custom attributes assigned to the record.
Host or User Group Memberships (A):Profiles can be configured to match endpoints that are members of specific internal FortiNAC groups or synchronized directory groups (like LDAP or Active Directory groups).
This allows for broad policy application based on organizational structure.
Location (E):The " Where " component allows administrators to restrict a profile match to specific physical or logical areas of the network, such as a particular switch, a group of ports, or a specific SSID.
Criteria like an " applied access policy " (D) are theoutcomeof a profile match rather than a criterion used to define the profile itself. Similarly, the " Adapter current VLAN " (C) is a dynamic state that changes based on enforcement and is not a standard static identifier used for profile matching.
" User/Host Profiles are used to identify the hosts and users to which a policy will apply. Profiles are created by selecting various criteria in theWho/What(Attributes and Groups) andWhere(Locations) sections.
Attributes can include Host Role, User Role, and OS. Group memberships allow matching based on internal or directory-based groups. Location criteria allow for filtering based on the device or port where the host is connected. " -FortiNAC-F Administration Guide: User/Host Profile Configuration.
NEW QUESTION # 72
......
NSE6_FNC_AD-7.6 test guide is an examination material written by many industry experts based on the examination outlines of the calendar year and industry development trends. Its main purpose is to help students who want to obtain the certification of NSE6_FNC_AD-7.6 to successfully pass the exam. Compared with other materials available on the market, the main feature of NSE6_FNC_AD-7.6 Exam Materials doesn’t like other materials simply list knowledge points. According to our statistics on the data so far, the passing rate of the students who have purchased one exam exceeds 99%, which is enough to see that NSE6_FNC_AD-7.6 test guide is a high-quality product that can help you to realize your dream.
New NSE6_FNC_AD-7.6 Exam Fee: https://www.testsdumps.com/NSE6_FNC_AD-7.6_real-exam-dumps.html