As far as we are concerned, the key to quick upward mobility lies in adapting your excellent personality to the style of the organization you are working in. Our VNX301 exam materials embrace much knowledge and provide relevant VNX301 Exam bank available for your reference, which matches your learning habits and produces a rich harvest of the VNX301 exam knowledge. As long as you buy our VNX301 study guide, you will be benefited from it!
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
GetValidTest offers a full refund if you cannot pass VNX301 certification on your first try. This is a risk-free guarantee currently enjoyed by our more than 90,000 clients. We can assure you that you can always count on our braindumps material. We are proud to say that our VNX301 Exam Dumps material to reduce your chances of failing the VNX301 certification. Therefore, you are not only saving a lot of time but money as well.
NEW QUESTION # 11
A VOS branch has two WAN circuits. You suspect the configured transport domain mapping is wrong because one link is not building the expected SD-WAN path. Which VSM control-plane command is most useful to check local WAN circuit information, transport domains, NAT status, and local tunnel-site details?
Answer: B
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation instructs administrators to connect to the VSM control plane with vsh connect vsmd and then use show vsm p2mp local-tunnel-sites 0 to check the status of local site objects. The example output includes the local site key, neighbor IP, site type, site name, branch ID, tenant ID, and detailed WAN link information. It also shows fields such as WAN local VRF ID, WAN local link name, circuit information, link ID, behind-NAT status, shaping rate, public and private addresses, link flags, transport domain, and SLA interval.
This command is therefore highly relevant when validating whether the local SD-WAN site has learned and built the correct WAN transport objects for overlay tunnel creation. If a circuit is mapped to the wrong transport domain or has incorrect NAT/public/private address state, the local-tunnel-site output is one of the best places to confirm it.
The other commands are useful for software version, CGNAT summary, or CPU usage, but they do not show the detailed SD-WAN local tunnel-site transport mapping.
NEW QUESTION # 12
Examine the exhibit below.
An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.
Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)
Answer: C,D
Explanation:
The correct answers are B and D . In the exhibit, the Next-Hop Selection Method is configured as Load Balance , and both INET and INET-2 have the same next-hop priority value of 1 . Versa SD-WAN guidance states that load balancing between WAN paths is achieved by configuring at least two circuits with equal priority. Therefore, when both INET and INET-2 satisfy the SLA requirements, sessions can be load-balanced across those two internet circuits.
Option D is also correct because the exhibit shows SLA Violation Action: Forward . This means that if no next hop is SLA-compliant, the VOS device is still allowed to forward traffic instead of dropping it. This behavior is consistent with Versa SD-WAN traffic-steering concepts, where forwarding profiles define circuit or path priorities, connection methods, load-balancing behavior, and SLA handling for traffic that matches an SD-WAN policy.
Option A is incorrect because the exhibit does not use the Automatic next-hop selection method. Versa' s performance-based SaaS optimization uses monitoring metrics to select the best path when configured for automatic/performance-based selection, but this exhibit shows Load Balance instead. Option C is not the best answer because LTE has lower priority 2 and would be considered only after the higher- priority INET and INET-2 paths are unavailable or unusable, not merely when one INET circuit fails.
NEW QUESTION # 13
You are asked to deploy a Versa Secure SD-WAN branch for 1000 locations. You need to profile the branches based on common deployment requirements.
In this scenario, which three configuration objects would be shared by multiple appliances? (Choose three.)
Answer: A,B,C
Explanation:
The correct answers are A, B, and D . For large-scale Versa Secure SD-WAN onboarding, common configuration is reusable through templates and grouping. A device template , also known as a post-staging template, provides the common base configuration that is applied to multiple VOS branch appliances. Versa documentation repeatedly shows configuration tasks being performed under Templates > Device Templates , where an organization is selected and the post-staging template is opened in Appliance view for common configuration.
A device group is also shared by multiple appliances because it groups devices that should receive the same template associations and common service behavior. This is the proper way to profile many branches with similar deployment requirements. Service templates are also shared objects. They are used to apply service- specific configurations, such as SD-WAN traffic steering, application steering, QoS, security, or other common services, across devices. Versa SD-WAN design documentation explains that application-steering templates automate business-intent policies and simplify management by combining application classification, forwarding-class mapping, and SD-WAN policy logic in a reusable template.
A workflow device is device-specific, and device bind data contains site-specific values such as interface addressing, gateways, VLANs, and other per-branch parameters. Therefore, those are not the shared configuration objects.
NEW QUESTION # 14
Which two statements are true about templates? (Choose two.)
Answer: A,D
Explanation:
The correct answers are C and D . Versa templates are designed to reuse common configuration while still allowing per-device customization. Template variables allow the same template to be deployed to multiple appliances while using device-specific values such as addresses, VLAN IDs, DHCP information, or other bind-data values. Versa documentation for deploying templates describes assigning values to variables contained in a main template that are specific to the device. This makes option C correct.
Option D is also correct because Versa workflows are used to create templates for VOS device configuration.
Versa documentation states that workflows are used to create templates to configure VOS devices, and also to create templates for application steering, spoke groups, and service chains.
Option A is not correct in the normal Versa Director onboarding model because a group of devices is associated with one staging template and one post-staging template, rather than multiple device templates being stacked per appliance. Option B is also incorrect because service templates are optional reusable service-specific fragments. Versa documentation states that service templates can be used by multiple device templates and device groups, but it does not require every appliance to have one.
NEW QUESTION # 15
Examine the exhibit below.
As an administrator of a Versa Secure SD-WAN deployment, you are asked to find the current bandwidth of each WAN circuit used for SD-WAN connectivity in a branch, but Versa Director is not displaying any information for the WAN circuits. In this scenario, what should be done to get the graph populated for all WAN circuits?
Answer: D
Explanation:
The correct answer is B . In the exhibit, Versa Director shows multiple branch interfaces and a Live Data column. To populate the bandwidth graph with current real-time statistics for all WAN circuits, Live Data must be selected for each WAN circuit that should be monitored. Versa documentation states that from a Director node, administrators can monitor VOS devices, provider organizations, tenants, events, and alarms. It also explains that Versa Director, together with Versa Analytics, can poll VOS devices in real time to provide visibility into what is happening on those devices and to assist with troubleshooting.
Because the requirement is to find the current bandwidth of each WAN circuit, simply refreshing the page is not enough. Refreshing only reloads the dashboard; it does not enable real-time polling for interfaces that are not selected. Selecting Live Data only for MPLS circuits would populate only MPLS- related data and would not satisfy the requirement for all WAN circuits. Unselecting and reselecting only the INET circuit affects only that one circuit. Therefore, the correct operational step is to enable Live Data for all WAN circuits shown in the branch interface dashboard.
NEW QUESTION # 16
......
Of course, a personal learning effect is not particularly outstanding, because a person is difficult to grasp the difficult point of the test, the latest trend in an examination to have no good updates at the same time, in order to solve this problem, our VNX301 study braindumps for the overwhelming majority of users provide a powerful platform for the users to share. Here, the all users of the VNX301 Exam Questions can through own ID number to log on to the platform and other users to share and exchange, can even on the platform and struggle with more people to become good friend, pep talk to each other, each other to solve their difficulties in study or life. The VNX301 prep guide provides user with not only a learning environment, but also create a learning atmosphere like home.
VNX301 Customized Lab Simulation: https://www.getvalidtest.com/VNX301-exam.html