Reliable H35-831 Exam Labs & Reliable H35-831 Practice Materials

It is heartening to announce that all Huawei users will be allowed to capitalize on a free Huawei H35-831 exam questions demo of all three formats of Huawei H35-831 practice test. It will make them scrutinize how our formats work and what we offer them, for example, the form and pattern of Huawei H35-831 Exam Dumps, and their relevant and updated answers.

Huawei H35-831 Exam consists of three main sections: Network Design, Network Security, and Network Management and Optimization. The Network Design section covers topics such as network architectures, network protocols, network planning, and network implementation. The Network Security section focuses on topics such as network security threats, security policies, security technologies, and security management. The Network Management and Optimization section covers topics such as network performance management, network fault management, network configuration management, and network optimization.

>> Reliable H35-831 Exam Labs <<

Reliable H35-831 Practice Materials, New H35-831 Exam Vce

A lot of applicants have studied from Huawei H35-831 practice material. They have rated it positively because they have cracked HCIE-Datacom-Carrier (Written) V1.0 (H35-831) certification on their first try. Itcerttest guarantees its customers that they can pass the HCIE-Datacom-Carrier (Written) V1.0 (H35-831) test on the first attempt.

Huawei H35-831 (HCIE-Datacom-Carrier (Written) V1.0) Certification Exam is a professional-level exam that tests the knowledge and skills required for network engineers working in the telecom industry. It is designed for professionals who have a deep understanding of data communication technologies and the ability to plan and design large-scale network solutions.

Huawei HCIE-Datacom-Carrier (Written) V1.0 Sample Questions (Q42-Q47):

NEW QUESTION # 42
In an intelligent cloud-network scenario, NCE centrally computes and delivers SRv6 Policies. Which statements about the BGP-LS IPv6 design are correct?

Exhibit 15.1 - Original topology/configuration figure
Select all that apply.

Answer: B,C,D

Explanation:
Exact Extract - Huawei Training Material (Automatic SDN Network O & M, p.26):
"BGP-LS: BGP Link-state Protocol, BGP extension, which is used to summarize topology information collected by IGP and send the information to the upper-layer controller. This feature is mainly used when the controller computes paths in a centralized manner." Huawei Reference Verification:
Huawei's Automatic SDN O & M curriculum defines BGP-LS as a BGP extension that summarizes topology information collected by IGP and sends it to a controller for centralized path computation. The intelligent cloud bearer design collects access, aggregation, and core topology, including bandwidth and delay. It uses BGP-LS peering/reporting relationships from ACC through AGG and backbone reporting nodes toward iMaster NCE-IP. In contrast, policies computed by the controller are signaled through the BGP IPv6 SR Policy address family rather than BGP-LS. This distinction establishes A, B, C and excludes D in the depicted hierarchical reporting model.
Technical Deep Dive:
A, B and C are correct for the illustrated architecture. The access and aggregation layers provide IGP- distributed topology and traffic engineering data, including link state, metrics and delay. BGP-LS speakers transport relevant node, link and prefix information toward the backbone reporting devices and NCE. The controller uses this combined topology to compute SRv6 Policy segment lists meeting SLA constraints.
Option D confuses topology reporting with policy distribution: BGP-LS exports network state; BGP IPv6 SR Policy conveys policy information to the headend for traffic steering. A BGP-LS route may encode link, node or prefix attributes but does not replace the SR Policy NLRI. Separating these address families allows a controller to obtain topology information independently of its chosen path-delivery mechanism. PCEP is another technology that can assist computation and LSP management in supported deployments.
#######################################################


NEW QUESTION # 43
In the network shown, RTA is in AS 100 and forms an EBGP peer relationship with RTB. RTB, RTC, RTD, RTE, and RTF are in AS 200. RTB, RTD, and RTE are also in sub-AS 65001, RTC is also in sub-AS 65002, and RTF is also in sub-AS 65003.
1. RTA imports route 1.1.1.1/32. What is the route's AS_Path after RTF receives it?
2. RTC imports route 3.3.3.3/32. What is the route's AS_Path after RTA receives it?
3. RTC imports route 3.3.3.3/32. What is the route's AS_Path after RTE receives it?

Exhibit 29.1 - Original topology/configuration figure

Answer: A

Explanation:
Huawei Reference Verification:
Huawei BGP confederations divide a large public AS into internal member autonomous systems while presenting a single AS identifier to external neighbors. Across member-AS boundaries, the exporting member- AS number is included in an AS_CONFED_SEQUENCE segment, commonly displayed in parentheses.
Confederation path segments are removed when exporting the route outside the confederation and the confederation AS number is used instead. Internal IBGP sessions within one member-AS do not prepend a new member-AS segment. Applying these rules gives (65001) 100 at RTF, 200 at RTA, and (65002) at RTE:
option C.
Technical Deep Dive:
C is correct. The externally visible confederation is AS200, with internal member ASs 65001, 65002 and
65003. For the first prefix RTA in AS100 advertises 1.1.1.1/32 to RTB in member AS65001. When RTB advertises it to RTF in member AS65003, RTB's member number is prepended as a confederation sequence, producing `(65001) 100`. For the second prefix RTC in member AS65002 originates 3.3.3.3/32 and the route crosses to RTB. Exporting it from the confederation toward RTA strips internal confederation segments and exposes AS200, yielding `200`. For the third prefix RTC advertises to RTB, which is in member AS65001.
RTE shares member AS65001 with RTB, so the path remains `(65002)` at RTE. These rules are standardized in RFC 5065 and allow confederation members to retain internal policy flexibility while presenting one coherent AS externally.
#######################################################


NEW QUESTION # 44
Assume Flex-Algo is configured on a device and a tunnel policy is set for the device to preferentially select a Flex-Algo-based SR-MPLS BE tunnel. Under which of the following conditions would a VPN route recurse to the Flex-Algo-based SR-MPLS BE tunnel?
Select all that apply.

Answer: B,D

Explanation:
Huawei Reference Verification:
Huawei uses a BGP Color Extended Community to associate service routes with transport characteristics and a BGP next-hop address to identify the transport destination. A tunnel policy can prefer SR-MPLS Best Effort tunnels calculated using Flex-Algo. The service route's color identifies the desired algorithm or constrained transport slice, and the next hop identifies the endpoint that the tunnel must reach. The Flex-Algo algorithm ID defines how the routing topology is calculated, while link affinity influences eligible links within that algorithm. Color and BGP next hop are the route-level recursion matching information; accordingly B and C are correct.
Technical Deep Dive:
B and C are correct. A Flex-Algo definition builds a separate constrained SPF topology using algorithm- specific attributes such as metrics and administrative group restrictions. Tunnel policies can map service colors to appropriate Flex-Algo paths. When a VPN route arrives, its BGP Color Extended Community describes the desired transport behavior, and its next-hop address identifies the remote PE or tunnel endpoint.
The device matches that pair against eligible tunnels and installs the resulting forwarding recursion. Affinity (A) can control which physical links participate in the algorithm-specific topology, but is not the route's direct matching attribute. Algorithm ID (D) identifies the computation algorithm rather than independently defining the BGP route recursion key. After resolution, forwarding NP/ASIC hardware applies the programmed SR- MPLS labels and next-hop group. This separation allows a carrier to provide differentiated transport characteristics without manually defining an explicit LSP for every VPN route.
#######################################################


NEW QUESTION # 45
Which of the following statements are true regarding multicast packets in a BIERv6 multicast network?
Select all that apply.

Answer: A,B

Explanation:
Huawei Reference Verification:
Huawei BIERv6 maps receiver BFR-IDs into BitStrings divided into sets according to the BitString length. A single multicast service may have receivers whose BFR-IDs belong to more than one set. The ingress BFIR must create set-specific copies with the matching Set Identifier and BitString. Because several sets may share part of the forwarding topology, multiple copies of the same multicast flow can traverse the same physical link. This makes B and D true, while the statements that receivers must share one set or that only one copy can traverse a link are incorrect.
Technical Deep Dive:
B and D are correct. A BIERv6 BitString indicates target receiver BFR-IDs within a set. If receiver numbering or scale exceeds one set's capacity, traffic is represented by multiple set-specific packets. A BFIR creates the necessary copies and each carries the proper set number and BitString; forwarding nodes replicate according to their BIFT. Paths for different sets can overlap, so two or more copies of the same multicast payload may traverse a shared link. This differs from the simplified expectation that a multicast forwarding tree always carries exactly one copy per link. BFR-ID planning is important because efficient allocation can reduce unnecessary duplicated packets and optimize bandwidth usage. Destination sets permit scalability without arbitrarily large per-packet BitStrings. The forwarding hardware uses the set and bit information to select the next-hop fan-out.
#######################################################


NEW QUESTION # 46
In an inter-AS VPN Option C network, VPN routes are exchanged between AS100 and AS200. Which of the following statements concerning inter-AS VPN Option C are correct?
Select all that apply.

Answer: A,C,D

Explanation:
Huawei Reference Verification:
Huawei inter-AS VPN Option C separates labeled public-network reachability from customer VPN route distribution. ASBRs exchange labeled IPv4 unicast reachability and must support MPLS forwarding on the relevant interconnection, including capability negotiation for BGP labels. VPNv4 routes can be exchanged between PEs or between route reflectors in different ASs using MP-EBGP. When the RRs peer via loopbacks and are not directly connected, EBGP multihop configuration is required. Option C does not require ASBRs to host complete VPNv4 tables or necessarily disable route-target filtering on them. Accordingly A, C and D are correct.
Technical Deep Dive:
A, C and D are correct. Option C is a scalable inter-AS MPLS L3VPN design. The ASBRs exchange labeled public IPv4 routes, providing an inter-AS transport LSP to the remote PE. MPLS must operate on the ASBR interconnection in this design and BGP labeled unicast capability must be supported. VPNv4 service routes are distributed directly among PEs or through RRs, so ASBRs need not maintain each customer's VPNv4 prefixes. RRs in separate autonomous systems may establish multihop MP-EBGP VPNv4 peering and use
`peer ebgp-max-hop` when sourced from non-directly connected addresses. Option B incorrectly describes a universally mandatory `undo policy vpn-target` command on ASBRs; route-target filtering matters where VPNv4 routes are actually maintained. The data plane processes transport labels across the inter-AS path and the egress PE performs the customer VPN lookup using its service label.
#######################################################


NEW QUESTION # 47
......

Reliable H35-831 Practice Materials: https://www.itcerttest.com/H35-831_braindumps.html