P.S. Free 2026 Cisco 350-101 dumps are available on Google Drive shared by Pass4training: https://drive.google.com/open?id=11y2eiiOznFIxgI6MCu_zW9J98xe_CrVL
If you have tried on our 350-101 exam questions, you may find that our 350-101 study materials occupy little running memory. So it will never appear flash back. If you want to try our 350-101 learning prep, just come to free download the demos which contain the different three versions of the 350-101 training guide. And you will find every version is charming. Follow your heart and choose what you like best on our website.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
The 350-101 vce braindumps of our Pass4training contain questions and correct answers and detailed answer explanations and analysis, which apply to any level of candidates. Our IT experts has studied Cisco real exam for long time and created professional study guide. So you will pass the test with high rate If you practice the 350-101 Dumps latest seriously and skillfully.
NEW QUESTION # 103
To double the range of a transmitter, which value must the transmitter be changed to if it is currently at 17 dBm?
Answer: A
Explanation:
Doubling the range of a wireless transmitter does not require a linear increase in power due to theinverse- square law of RF propagation. Free-space path loss (FSPL) increases with the square of the distance, meaning to double the distance, the required power must increase by a factor of four in linear terms. In decibel units, power increases are logarithmic:10log10(4)#610 \log_{10}(4) \approx 610log10(4)#6dB.
Given a transmitter at 17 dBm, increasing its output by 6 dB to23 dBmwould theoretically double the coverage in free-space conditions. However, due to environmental factors like multipath, absorption, and antenna efficiency, Cisco RF design guides often round to practical increments, suggesting an increase from
17 dBm to27 dBmto achieve a robust doubling of coverage under real-world conditions.
Options A (20 dBm) and D (17 dBm) are insufficient because they do not provide the necessary power increase to overcome the logarithmic path loss for doubling range. Option C (100 dBm) is unrealistic and exceeds regulatory limits for enterprise wireless deployments. Proper power planning must balance coverage, interference, and regulatory compliance. Reference topic:RF Fundamentals - Free-space path loss, power control, and transmitter range planning in enterprise WLAN design.
NEW QUESTION # 104
An administrator configures WPA3-Personal security on a WLAN. Which authentication method is introduced with this standard?
Answer: B
Explanation:
WPA3-Personal introduces Simultaneous Authentication of Equals (SAE), replacing the WPA2 pre-shared key handshake. SAE improves resistance against offline dictionary attacks and enhances wireless security. PEAP and EAP-TLS are enterprise authentication methods, while LEAP is an outdated Cisco protocol.
NEW QUESTION # 105
A network engineer must ensure that guest users connecting to a Cisco 9800 WLC are assigned IP addresses from a specific subnet that is separate from corporate users. The guest network must support at least 200 simultaneous connections and isolate traffic from internal devices. The DHCP server must allocate addresses only within the 10.20.30.0/24 subnet. Which action must the network engineer take to accomplish this task?
Answer: D
Explanation:
The correct action is to create a dedicated guest interface/VLAN and bind it to the guest WLAN through the Catalyst 9800 policy profile. In Catalyst 9800 architecture, the WLAN defines the SSID and wireless security parameters, while the policy profile defines client forwarding policy, VLAN mapping, DHCP-related behavior, and access policy. Cisco's Catalyst 9800 VLAN configuration procedure places the VLAN selection under thePolicy Profile > Access Policiessection, where a VLAN or VLAN group is mapped to the WLAN policy profile. Cisco also documents that DHCP can be configured per interface or per WLAN and recommends using the DHCP server address assigned to the relevant interface for WLAN client addressing.
A dedicated guest VLAN backed by the 10.20.30.0/24 DHCP scope provides up to 254 usable addresses, satisfying the 200-client requirement while keeping guest users separated from corporate users at Layer 3
/VLAN boundaries. Option A and C are wrong because a shared DHCP pool violates the requirement for a guest-only subnet; DHCP option 43 is for AP/controller discovery, not client addressing. Option D is not scalable and does not define DHCP allocation. Reference topics:Catalyst 9800 policy profiles, WLAN-to- policy mapping, guest VLAN segmentation, DHCP scopes, and guest network isolation.
NEW QUESTION # 106
What is the primary modulation technology used by 802.11ax in wireless communications?
Answer: D
Explanation:
The correct answer isorthogonal frequency-division multiple access, orOFDMA. Cisco identifies 802.11ax, also known as Wi-Fi 6, as the generation that introduces OFDMA-based operation to improve efficiency, especially in dense wireless environments. Cisco's Catalyst 9800 documentation states that OFDMA support for 802.11ax APs improves performance in dense deployments, enables simultaneous data transmissions with OFDMA and MU-MIMO, and supports uplink and downlink multi-user operations across multiple client devices.
Strictly, OFDMA is a multi-user channel-access and subcarrier allocation method rather than a pure constellation modulation scheme. However, within 802.11ax fundamentals and this answer set, OFDMA is the defining PHY/MAC technology. It divides a 20, 40, 80, or 160 MHz channel into smaller resource units so multiple clients can transmit or receive in the same transmission opportunity. Cisco further explains that OFDMA improves wireless performance by using independently modulated subcarriers within frequencies, allowing simultaneous transmissions to and from multiple clients. FHSS and DSSS belong to older 802.11 PHY generations. QAM is used for symbol modulation, but "Quadrature Amplitude Modulation OFDMA" is not the primary 802.11ax technology name. Reference topics:802.11ax/Wi-Fi 6, OFDMA, resource units, uplink/downlink multi-user operation, and high-efficiency WLAN design.
NEW QUESTION # 107
What is a benefit of using AI Enhanced RRM over traditional RRM?
Answer: A
Explanation:
AI Enhanced Radio Resource Management (RRM) in Cisco wireless networks improves upon traditional RRM by leveraging historical data in addition to real-time measurements to optimize network performance. Traditional RRM reacts primarily to instantaneous conditions, such as current interference or load, and adjusts parameters like transmit power and channel assignment accordingly. In contrast, AI Enhanced RRM uses historical telemetry to identify patterns, predict congestion, and preemptively adjust network parameters, providing a more stable and high- performing wireless environment. This predictive capability allows the system to make informed adjustments for channel reuse, load balancing, and interference mitigation before network degradation occurs. While real-time adjustments are still made, the inclusion of historical data allows for smarter decisions and more consistent client experience.
NEW QUESTION # 108
......
With the development of technology, our 350-101 training engine will be updated regularly. Actually, we never stop researching the new functions of the study materials. Normally, we will release our new version of the 350-101 exam simulation on our website once it passed the tests. Many details will be perfected in the new version of our 350-101 Study Materials not not on the content, but also on the displays. And we have been in this career for over ten years, our 350-101 learning guide is perfect.
Reliable 350-101 Dumps Book: https://www.pass4training.com/350-101-pass-exam-training.html
P.S. Free 2026 Cisco 350-101 dumps are available on Google Drive shared by Pass4training: https://drive.google.com/open?id=11y2eiiOznFIxgI6MCu_zW9J98xe_CrVL