What's more, part of that CertkingdomPDF FlashArray-Implementation-Specialist dumps now are free: https://drive.google.com/open?id=1LnlQZ-5KI3AndTcxYHZZrFJnc2r8-7Nz
Our experts have devised a set of exam like FlashArray-Implementation-Specialist practice tests for the candidates who want to ensure the highest percentage in real exam. Doing them make sure your grasp on the syllabus content that not only imparts confidence to you but also develops your time management skills for solving the test comprise given time lim. FlashArray-Implementation-Specialist Practice Tests comprise a real exam like scenario and are amply fruitful to make sure a memorable success in FlashArray-Implementation-Specialist exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Certification FlashArray-Implementation-Specialist Test Questions <<
At CertkingdomPDF, we understand the importance of flexibility and convenience in the learning experience. That's why we've designed our product to provide students with real Pure Storage FlashArray-Implementation-Specialist questions they need to succeed, while also giving them the flexibility and convenience they need to fit their studies into their busy schedules. Free demos and up to 1 year of free practice material updates are also available at CertkingdomPDF. Buy today and start your journey with actual Pure Storage Certified FlashArray Implementation Specialist (FlashArray-Implementation-Specialist) exam dumps.
NEW QUESTION # 80
After racking a new FlashArray with one data pack, how should DirectFlash modules be installed?
Answer: A
Explanation:
Proper airflow and thermal management are critical for the reliability of high-density storage arrays. FlashArray chassis are designed with specific airflow baffles and cooling zones that rely on the drive bays being populated in a specific order.
When installing a new FlashArray with a single data pack (typically 10 drives), the Implementation Engineer must install the DirectFlash Modules starting in bay 0, filling from left to right.
Bay 0 is typically the leftmost slot (when facing the front of the array).
Filling slots 0-9 ensures that the first "cooling zone" is properly pressurized, forcing air through the populated modules and the chassis midplane correctly.
Leaving gaps (e.g., installing in slots 10-19 while 0-9 are empty) can disrupt the airflow path, potentially leading to hotspots or inefficient cooling for the controllers behind the backplane.
Additionally, the software enumeration of drives often expects contiguous population starting from the lowest index for logical clarity, though cooling is the primary physical constraint.
=========
NEW QUESTION # 81
When using FA File, where can the Implementation Engineer manage directories?
Answer: D
Explanation:
FlashArray File Services (FA File) brings unified block and file storage capabilities directly into the Purity operating system, allowing customers to provision high-performance SMB and NFS shares alongside their traditional Fibre Channel and iSCSI volumes.
Once the initial FA File networking (Virtual Interfaces) and DNS/Active Directory integrations are configured, the Implementation Engineer must actually create the file structures for the customer. In the Pure Storage Purity GUI, the logical hierarchy for file storage requires the administrator to first create a "File System," which acts as the top-level container, and then create "Directories" within it that will be exported to clients.
To manage, create, or modify these directories, the Implementation Engineer must navigate through the left- hand navigation pane to Storage > File Systems . Clicking into a specific File System reveals the
"Directories" tab. From this central pane, the engineer can create new managed directories, apply specific export policies (defining which IPs or users have read/write access), and configure directory-level snapshot schedules. Option B (Settings > Access > Directory Services) is a common distractor, but that menu path is used exclusively for configuring the array's connection to Active Directory or LDAP for administrative login authentication, not for managing storage directories.
NEW QUESTION # 82
The Pure Engagement Request (PER) specifies that iSCSI ports ETH2 and ETH3 should be set to 10 Gb/s.
After configuring the ports and connecting them to the SAN, the Implementation Engineer observes that ETH2
/3 are not negotiating and display 0 b/s. The SAN is operating at 40 Gb/s, with support for up to 100 Gb/s.
What should the Implementation Engineer do to resolve this issue and complete the install?
Answer: D
Explanation:
When deploying Ethernet-based storage protocols like iSCSI or NVMe/TCP, establishing a healthy Layer 1 physical connection is the absolute first step. On standard Pure Storage FlashArray controllers (like the //X50 or //X70), the default on-board high-speed ports (ETH2 and ETH3) utilize SFP28 physical cages. These specific ports are hardware-designed to support 10GbE or 25GbE speeds depending on the inserted SFP+ or SFP28 transceiver.
In this scenario, a fundamental physical layer mismatch is occurring. The array ports are attempting to link at
10 Gb/s (using SFP+ optics), but the upstream SAN switch is operating natively at 40 Gb/s (which utilizes a physically larger QSFP+ form factor with four parallel 10G lanes). Auto-negotiation across mismatched optical form factors and lane architectures will almost always fail, resulting in a dead link showing 0 b/s.
An Implementation Engineer cannot magically "force negotiate" a 10G/25G SFP28 port on the array to run at
40G because the physical hardware simply does not support that bandwidth or encoding. Attempting to force the switch side (Option C) will also fail if the physical media doesn't match. The only correct, supported resolution is a hardware intervention: the engineer must replace the transceivers with the appropriate type
. Typically, this involves using a QSFP-to-SFP adapter (QSA) on the switch side, or utilizing a specialized
40G-to-4x10G breakout cable to ensure both ends of the fiber are communicating using the exact same light wavelengths, lane counts, and physical port speeds.
NEW QUESTION # 83
At the completion of an upgrade, what command should the Implementation Engineer run to send phonehome logs?
Answer: B
Explanation:
After finishing an upgrade or major maintenance event, it is standard practice to manually trigger a log upload to Pure1. This ensures that the most recent diagnostic data-covering the upgrade window itself-is available to Pure Storage Support for verification and historical record.
The command purearray phonehome --send-today is the standard syntax used to force an immediate upload of the current day's logs. This command packages the relevant logs from the upgrade period and pushes them to the Pure1 cloud.
Options like purearray phonehome --send-logs or purelogs --send-all are often incorrect syntax or deprecated aliases.
--send-today is specific and efficient, targeting exactly the timeframe relevant to the maintenance window just completed.
=========
NEW QUESTION # 84
When transforming an array from SAS to NVMe with the Evergreen XFORM upgrade, when should a swing shelf be installed?
Answer: C
Explanation:
A swing shelf (temporary external capacity) is required during a SAS-to-NVMe (Evergreen) upgrade specifically when there is insufficient free space elsewhere in the array to evacuate the data residing in the legacy chassis.
The Evergreen "Stateless" or XFORM upgrade involves replacing the legacy SAS-based controller chassis (which contains SAS SSDs) with a new NVMe-based FlashArray//X chassis (which uses DirectFlash Modules).
Evacuation Requirement: Before the old chassis can be removed, the data on its internal drives must be moved to a safe location. If the customer already has external SAS expansion shelves with enough free space to hold this data, Purity will transparently migrate the data there, and no swing shelf is needed.
Swing Shelf Scenario: If the array is highly utilized (e.g., the chassis is full and external shelves are full or non-existent), the Implementation Engineer must attach a temporary "swing shelf" provided by Pure Storage. This shelf acts as the evacuation target. Once the data is moved to the swing shelf, the old chassis is replaced. The data is then migrated back from the swing shelf to the new NVMe media in the new chassis, and the swing shelf is returned.
NEW QUESTION # 85
......
No doubt the Pure Storage FlashArray-Implementation-Specialist certification exam is one of the most difficult CertkingdomPDF certification exams in the modern CertkingdomPDF world. This FlashArray-Implementation-Specialist exam always gives a tough time to their candidates. The CertkingdomPDF understands this challenge and offers real, valid, and top-notch Pure Storage FlashArray-Implementation-Specialist Exam Dumps in three different formats. All these three FlashArray-Implementation-Specialist exam questions formats are easy to use and compatible with all devices, operating systems, and web browsers.
FlashArray-Implementation-Specialist Valid Exam Notes: https://www.certkingdompdf.com/FlashArray-Implementation-Specialist-latest-certkingdom-dumps.html
BONUS!!! Download part of CertkingdomPDF FlashArray-Implementation-Specialist dumps for free: https://drive.google.com/open?id=1LnlQZ-5KI3AndTcxYHZZrFJnc2r8-7Nz