ActualVCE offers the best self-assessment software for the AZ-802 exam. This desktop-based practice exam provides valid and up-to-date AZ-802 practice test questions. You can customize the software by adjusting the time and number of Administering Windows Server (AZ-802) questions to your preferences. Additionally, you can try a free demo of the AZ-802 Practice Test. This software keeps track of all your AZ-802 practice exam attempts, allowing you to monitor your progress and improve your Administering Windows Server (AZ-802) exam preparation.
| Section | Objectives |
|---|---|
| Networking and high availability | - High availability and disaster recovery
|
| Compute, storage, and virtualization | - Virtual machines and containers
|
| Secure and manage Windows Server environments | - Identity and access management
|
| Hybrid infrastructure management | - Monitoring and update management
|
Are you ready to take your career to the next level with the Administering Windows Server (AZ-802)? Look no further than ActualVCE for all of your AZ-802 exam needs. Our comprehensive and cost-effective solution includes regularly updated Microsoft AZ-802 Exam Questions, available in a convenient PDF format that can be downloaded on any device, including PC, laptop, mac, tablet, and smartphone.
NEW QUESTION # 432
Which groups can you add to Group3, and which groups can you add to Group5? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Group3: Group1, Group2, Group4, and Group5 only. Group5: Group4 only.
Group nesting in AD DS is governed strictly by group scope, independent of whether a group is security- or distribution-type. A Domain Local group can contain user accounts, Global groups from any domain, and Universal groups from any domain, plus other Domain Local groups from its own domain only. Group3 is a Domain Local group in contoso.com, so it can accept Group1 (Universal, contoso.com), Group2 (Global, contoso.com), and Group4 and Group5 (both Global, canada.contoso.com), since Global groups from any domain are valid Domain Local members. It cannot accept Group6, because Group6 is Domain Local in canada.contoso.com, a different domain, and Domain Local groups may only nest other Domain Local groups from their own domain. That gives Group3: Group1, Group2, Group4, and Group5 only. A Global group, by contrast, can contain only user accounts and other Global groups from the same domain. Group5 is Global in canada.contoso.com, so among the remaining groups only Group4 qualifies, since it is also Global and in the same domain; Group1 (Universal), Group2 (Global but a different domain), and Group6 (Domain Local) are all excluded by scope rules. That gives Group5: Group4 only.
NEW QUESTION # 433
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. You implement a central store. You create a new Group Policy Object (GPO) named GPO1. When you attempt to edit GPO1, you see that the " Administrative Templates: Policy definitions (ADMX files) retrieved from the central store " node shows only two settings (far fewer than the normal full set of Administrative Template settings). You need to ensure that all settings are available. Solution: You modify the properties of GPO1.
Does this meet the goal?
Answer: B
Explanation:
The root cause of this symptom is that the Central Store ' s PolicyDefinitions folder is missing the full default set of Windows ADMX/ADML administrative template files -- it currently contains only a couple of custom (ActiveX-related) template files. This is entirely a matter of which ADMX/ADML files physically exist in the Central Store; it has nothing to do with GPO1 as an object. Modifying GPO1 ' s own properties -- its GPO status, link enforcement, security filtering, WMI filtering, or any of the other properties exposed on a GPO -- does not add, remove, or change any ADMX/ADML file, and therefore cannot cause the Group Policy Management Editor to display any additional Administrative Template settings that aren ' t already present as files in the Central Store. The Administrative Templates settings displayed when editing any GPO are sourced purely from whatever ADMX files exist in the Central Store (once one exists) -- this is a property of the store itself, shared identically across every GPO edited from a machine pointed at that store, not a per-GPO setting that can be toggled via GPO1 ' s own properties. Because the actual fix requires adding the missing ADMX
/ADML files to the Central Store, and modifying GPO1 ' s properties does not touch the Central Store ' s contents at all, this solution does not meet the goal.
NEW QUESTION # 434
You deploy a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. You deploy five servers to the domain. You add the servers to a group named NLBHosts. You plan to configure a Network Load Balancing (NLB) cluster named NLBCluster.contoso.com that will contain the five servers.
You need to ensure that the NLB service on the nodes of the cluster can use a group managed service account (gMSA) to authenticate. Which three PowerShell cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Add-KdsRootKey 2. New-ADServiceAccount 3. Install-ADServiceAccount
Before any group managed service account can be created in a forest, the Key Distribution Service root key must exist, since it supplies the key material the KDS uses to compute and periodically roll the gMSA ' s password; this is created once with Add-KdsRootKey. Next, New-ADServiceAccount creates the actual gMSA object, and its -PrincipalsAllowedToRetrieveManagedPassword parameter can be pointed directly at the existing NLBHosts group, which authorizes all five NLB nodes to retrieve the managed password in a single step, without needing to grant permission to each computer individually. Finally, Install- ADServiceAccount must be run locally on each of the five NLB nodes to actually install and cache the gMSA account on that computer, which is what allows the NLB service running there to authenticate as the gMSA.
Set-KdsConfiguration adjusts advanced KDS server-side settings and is not a required step in standard gMSA provisioning. Add-ADGroupMember would only be needed if authorization were being granted by adding individual computer accounts to a security group after the fact, which is unnecessary here since the group already exists and is referenced directly. Add-ADComputerServiceAccount associates a computer with a standalone (non-group) managed service account and does not apply to gMSA scenarios like this one.
NEW QUESTION # 435
Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains a parent domain named contoso.com and a child domain named corp.contoso.com. Both domains contain domain controllers that have the DNS Server role installed. Some domain controllers in contoso.com do NOT have the DNS Server role installed. The DNS zone for contoso.com is Active Directory-integrated and uses secure dynamic updates. The zone replicates to all the DNS servers in the forest. You need to modify the zone to meet the following requirements: - Prevent the DNS servers in corp.contoso.com from receiving contoso.com zone data. - Minimize Active Directory replication traffic. What should you do?
Answer: D
Explanation:
An Active Directory-integrated zone ' s replication scope controls exactly which set of domain controllers receive a copy of the zone data, and Windows Server offers four scopes: all DNS servers in the forest, all DNS servers in the domain, all domain controllers in the domain, or the domain controllers enumerated in a custom application directory partition. The current setting, all DNS servers in the forest, replicates contoso.
com ' s zone data to every DNS server anywhere in the forest, including the DNS servers hosted on domain controllers in the child domain corp.contoso.com, which is exactly the behavior that must be stopped.
Changing the replication scope to all the DNS servers on the domain controllers in the contoso.com domain confines replication strictly to DNS servers that are also domain controllers within contoso.com itself, which both excludes every DNS server in corp.contoso.com (satisfying the first requirement) and reduces the replication set from a forest-wide scope down to a single-domain scope, cutting unnecessary AD replication traffic (satisfying the second requirement). Scoping to all domain controllers in the domain would replicate to contoso.com DCs that lack the DNS Server role entirely, needlessly bloating those DCs with zone data they will never serve, which is worse than necessary for minimizing traffic. Converting to a secondary zone on each DC abandons AD-integration and its dynamic update and multi-master benefits, and scoping to all DNS servers in the forest is the current, over-broad configuration causing the problem.
NEW QUESTION # 436
You have an Azure virtual machine named VM1 that has the Web Server (IIS) server role installed. VM1 hosts a critical line-of-business (LOB) application. After the security team at your company deploys a new security baseline to VM1, users begin reporting that the application is unresponsive. You suspect that the security baseline has caused networking issues. You need to perform a network trace on VM1. What should you do?
Answer: B
Explanation:
The Azure Performance Diagnostics tool, enabled from the Performance diagnostics blade of a virtual machine in the Azure portal, includes an Advanced performance analysis scenario that captures a network trace alongside performance counters, Xperf traces, and StorPort traces in a single guided run, making it the built-in, portal-driven way to obtain a network trace for an Azure VM without needing to manually install or run separate tracing tools by hand. Performance Monitor Data Collector Sets can gather performance counters and event trace logs but do not perform a packet-level network capture, and configuring the general Diagnostics settings for VM1 in the Azure portal collects boot diagnostics, metrics, and logs rather than a network trace. There is also no standard built-in Windows utility matching the exact name given in the first option. Because Performance Diagnostics packages the completed trace and its findings for download and analysis, and specifically targets exactly this kind of post-configuration-change networking investigation, configuring the Performance diagnostics settings for VM1 is the correct action.
NEW QUESTION # 437
......
You can know what knowledge points you do not master. By the report from our AZ-802 study questions. Then it will be very easy for you to make your own learning plan. We believe that the learning plan based on the report of our AZ-802 preparation exam will be very useful for you. So if you buy our AZ-802 Practice Engine, it will help you pass your exam and get the certification in a short time, and you will find that our study materials are good value for money.
AZ-802 Valid Vce Dumps: https://www.actualvce.com/Microsoft/AZ-802-valid-vce-dumps.html