We all know the effective diligence is in direct proportion to outcome, so by years of diligent work, our experts have collected the frequent-tested knowledge into our SRAN-Radio-Network-Performance-Optimization practice materials for your reference. So our SRAN-Radio-Network-Performance-Optimization training materials are triumph of their endeavor. By resorting to our SRAN-Radio-Network-Performance-Optimization practice materials, we can absolutely reap more than you have imagined before. We have clear data collected from customers who chose our SRAN-Radio-Network-Performance-Optimization actual tests, the passing rate is 98-100 percent. So your chance of getting success will be increased greatly by our materials.
| Section | Weight | Objectives |
|---|---|---|
| Mobility and Handover Optimization | 20% | - Handover parameters and algorithms - Inter-RAT mobility and optimization - Mobility robustness and optimization |
| Quality of Service and Resource Management | 15% | - QoS parameters, scheduling and admission control - Radio resource management and optimization |
| Advanced Optimization and SON Features | 10% | - Energy saving and advanced features - Self-Organizing Networks (SON) use cases and optimization |
| Coverage and Capacity Optimization | 30% | - Capacity planning, load balancing and optimization - Coverage analysis, tuning and optimization - Interference analysis and mitigation techniques |
| SRAN Performance Optimization Fundamentals | 25% | - Performance optimization principles and methodology - Network performance monitoring and analysis tools - Key performance indicators (KPIs) definition and measurement |
>> Exam SRAN-Radio-Network-Performance-Optimization Quizzes <<
It is our mission to help you pass the exam. SRAN-Radio-Network-Performance-Optimization guide torrent will provide you with 100% assurance of passing the professional qualification exam. We are very confident in the quality of SRAN-Radio-Network-Performance-Optimization study guide. And we believe that all students who have purchased our study materials will be able to successfully pass the professional qualification exam as long as they follow the content provided by SRAN-Radio-Network-Performance-Optimization study guide, study it on a daily basis, and conduct regular self-examination through mock exams. Once you unfortunately fail the exam, SRAN-Radio-Network-Performance-Optimization Guide Torrent will provide you with a full refund and the refund process is very simple. As long as you provide your staff with your transcripts, you will receive a refund soon. Of course, before you buy, SRAN-Radio-Network-Performance-Optimization certification training offers you a free trial service, as long as you log on our website, you can download our trial questions bank for free. I believe that after you try SRAN-Radio-Network-Performance-Optimization certification training, you will love them.
NEW QUESTION # 11
A slice supporting sensors and smart meters would be categorized as:
Answer: C
Explanation:
The correct answer is A .
Sensors and smart meters are typical massive IoT use cases. They usually involve a very large number of devices sending small amounts of data, often with low mobility and low power requirements.
This type of traffic fits mMTC , or massive Machine Type Communications .
Why the other options are not correct:
URLLC is used for very low-latency and highly reliable services, such as industrial automation, remote control, or mission-critical applications.
eMBB is used for high-throughput broadband services, such as video, fixed wireless access, or enhanced mobile internet.
DNN is not a slice category. It means Data Network Name and identifies the data network the UE connects to, similar to APN in LTE.
Therefore, a slice supporting sensors and smart meters is categorized as:
mMTC.
NEW QUESTION # 12
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?
Answer: C
Explanation:
The correct answer is Format 1 / Type B .
For PRACH planning, the selected preamble format must support the required cell radius. Format 0 is too short for a 33 km cell because it is typically suitable only up to around 14.5 km . Format 2 is also not suitable because its practical maximum cell radius is around 29.5 km , which is below the required 33 km . Therefore, a longer PRACH format is needed.
Because the scenario mentions high mobility , an unrestricted PRACH set is not preferred. High-mobility environments require a restricted set to handle Doppler effects and reduce ambiguity in PRACH preamble detection. Between the restricted-set options, Type B is the correct choice for this 33 km high-mobility case.
A matching Nokia-style question source also lists this exact scenario with Format 1 / Type B as option A.
NEW QUESTION # 13
When selecting an LTE anchor layer for EN-DC , why is it important to check 3GPP band combinations ?
Answer: C
Explanation:
The correct answer is B .
In 5G NSA EN-DC , the UE connects to LTE as the Master Cell Group , or anchor, and NR as the Secondary Cell Group . Not every LTE band can be paired with every NR band. The supported LTE-NR combinations are defined by 3GPP band-combination rules and must also be supported by the UE chipset and device capability.
For example, an operator may have LTE Band 3, Band 7, or Band 20 and NR n78, but only certain LTE-NR combinations may be valid for EN-DC. If the selected LTE anchor band is not supported in combination with the NR band, the UE will not be able to establish EN-DC even if LTE and NR coverage both exist.
Option C is not correct because dual-uplink support depends on UE capability and specific band-combination support; it cannot be guaranteed for all UE models. Option A and D are unrelated to the main purpose of checking 3GPP band combinations.
So the correct reason is:
To ensure that LTE and NR bands are compatible and allowed as EN-DC pairs.
NEW QUESTION # 14
What is the role of admission control in 5G networks ?
Answer: A
NEW QUESTION # 15
In a 5G cell , the following parameter has been modified: lowLatencyReservation = 15 .
Which percentage of UEs will be reallocated to a higher SR periodicity group whenever the threshold for moving to a higher SR periodicity group is reached?
Answer: C
Explanation:
The correct answer is C .
In 5G uplink scheduling, SR , or Scheduling Request , is used by the UE to request uplink resources when it has data to send. SR periodicity affects uplink latency and PUCCH capacity: shorter SR periodicity gives lower latency but consumes more control-channel resources, while longer SR periodicity saves resources but increases delay.
The parameter lowLatencyReservation = 15 means 15% of the UE/resource share is reserved for the low- latency SR periodicity group. When the load threshold is reached, the remaining portion can be moved to a higher SR periodicity group.
Calculation:
100% # 15% = 85%
So the percentage of UEs that can be reallocated to a higher SR periodicity group is:
0.85 , or 85% .
NEW QUESTION # 16
......
We not only do a good job before you buy our SRAN-Radio-Network-Performance-Optimization test guides, we also do a good job of after-sales service. Because we are committed to customers who decide to choose our SRAN-Radio-Network-Performance-Optimization study tool. We put the care of our customers in an important position. We provide you with global after-sales service. If you have any questions that need to be consulted, you can contact our staff at any time to help you solve problems related to our SRAN-Radio-Network-Performance-Optimization qualification test. Our thoughtful service is also part of your choice of buying our learning materials. Once you choose to purchase our SRAN-Radio-Network-Performance-Optimization test guides, you will enjoy service.
SRAN-Radio-Network-Performance-Optimization Practice Braindumps: https://www.testinsides.top/SRAN-Radio-Network-Performance-Optimization-dumps-review.html