참고: KoreaDumps에서 Google Drive로 공유하는 무료 2026 Microsoft MB-335 시험 문제집이 있습니다: https://drive.google.com/open?id=13_zWlDUDZ6LarW9rCsKKO6fWP2SUAp0n
Microsoft인증 MB-335시험은 IT인증시험중 가장 인기있는 시험입니다. Microsoft인증 MB-335시험패스는 모든 IT인사들의 로망입니다. KoreaDumps의 완벽한 Microsoft인증 MB-335덤프로 시험준비하여 고득점으로 자격증을 따보세요.
마이크로소프트 MB-335 자격증 시험은 공급망 관리 전문가들에게 귀중한 자격증입니다. 이 시험은 공급망 관리 기능 컨설턴트 전문가들에게 필수적인 주제들을 다룹니다. 시험에 통과함으로써 후보자는 소프트웨어와 그 기능을 이해하며 솔루션을 구성하고 구현할 수 있는 능력을 입증합니다. 이 자격증은 해당 산업에서 매우 존경받으며 전 세계적으로 인정되어, 이 분야에서 경력을 발전시키고자 하는 전문가들에게 귀중한 자산입니다.
현재 많은 IT인사들이 같은 생각하고 잇습니다. 그것은 바로Microsoft MB-335인증시험자격증 취득으로 하여 IT업계의 아주 중요한 한걸음이라고 말입니다.그만큼Microsoft MB-335인증시험의 인기는 말 그대로 하늘을 찌르고 잇습니다,
Microsoft MB-335 인증 시험은 개인이 Dynamics 365 공급망 관리에 대한 전문 지식을 보여 주고이 분야에서 경력 전망을 향상시키는 훌륭한 방법입니다. 올바른 준비와 헌신으로 누구나이 시험을 통과하고 Dynamics 365 공급망 관리 기능 컨설턴트 전문가로 인증 될 수 있습니다.
MB-335 인증 시험은 Dynamics 365를 사용한 공급망 관리의 다양한 측면을 다루는 종합적인 시험입니다. 시험은 여러 섹션으로 나누어져 있으며 각 섹션에서는 특정 영역에 대한 지식을 시험하는 다양한 선택형 문제와 시뮬레이션 기반 시나리오가 포함되어 있습니다. 시험은 실제 공급망 관리 문제를 해결하기 위해 지식과 기술을 적용해야 하는 것을 요구합니다.
질문 # 59
A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the same sub assembly item and resource sanding process.
You observe an Increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce. You must make a permanent change to the number of units the resource can produce for all future orders.
You need to adjust the process quantity on the route operation.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
정답：
설명：
Explanation:
A screenshot of a computer AI-generated content may be incorrect.
질문 # 60
A company uses the production control module in Dynamics 365 Supply Chain Management.
Production workers require precise instructions to know which tools and parts to use and how to use them when the workers put things together during the assembly process.
You need to configure the system to initiate mixed reality Dynamics 365 Guides for production workers.
Which four actions should you recommend be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
정답：
설명：
Explanation:
A screenshot of a computer AI-generated content may be incorrect.
질문 # 61
A company uses distributed hybrid topology within their Dynamics 365 Supply Chain Management system.
The company plans to build a manufacturing plant on a mountain to be closer to a required mineral source.
Internet connectivity is unreliable, and availability of bandwidth speed is limited. The company plans to deploy an operational edge scale unit for the plant to address the connectivity issue.
You need to determine where production operations can be performed.
Which method should you recommend?
To answer, drag the appropriate methods to the correct requirements. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
정답：
설명：
Explanation:
To determine where production operations can be performed, you should recommend the following methods:
* Record the start of production: You should recommend the Production floor execution interface method. This method allows workers to register their daily work, such as when they start a job, report feedback about jobs, register indirect activities, and report absence1. Workers can use the production floor execution interface to sign in with their badge IDs and select the jobs that they want to start from the All jobs tab1. They can also view the details and instructions for each job, and report good quantities and scrap1.
* Report the number of production units completed and finished goods put away: You should recommend the Production floor execution interface and Warehouse Management mobile app methods. These methods allow workers to report the completion of production jobs and the movement of finished goods to inventory. Workers can use the production floor execution interface to complete a job by selecting it from the Active jobs tab and tapping Complete1. They can also print labels for the finished goods if required2. Workers can use the Warehouse Management mobile app to scan or enter license plates for the finished goods and put them away in a location3. They can also perform other warehouse operations, such as picking, packing, receiving, and cycle counting3.
* Report time spent training a new employee about line operation: You should recommend the Production floor execution interface method. This method allows workers to register indirect activities that are not related to a specific production job, such as training, meetings, or maintenance1. Workers can use the production floor execution interface to register an indirect activity by tapping Indirect activity on the toolbar and selecting an activity type from the list1. They can also enter a quantity or duration for the activity, and add a comment if needed1.
1: How workers use the production floor execution interface 2: Print labels 3: Install and connect the Warehouse Management mobile app
질문 # 62
A company produces paints and assembles bicycle frames.
You must account for paint drying time before assembly operations can begin.
You need to set up the operation to encompass queue times.
Which two options can you use? Each correct answer presents pad of the solution.
NOTE: Each correct selection is worth one point.
정답：A,B
설명：
Explanation
Queue time is the time that a job waits at a work center before or after the job is processed1. You can use queue time to account for paint drying time before assembly operations can begin. You can specify queue time in minutes, hours, or days on the route operations that are attached to the production order2.
To set up the operation to encompass queue times, you should do the following:
Enter a value in the queue time after field for the painting operation. This value indicates how long the painted bicycle frames must wait at the painting work center before they can be moved to the next operation2. For example, if the paint drying time is 24 hours, you can enter 24 in the queue time after field and select Hours as the unit.
Enter a value in the queue time before field for the assembly operation. This value indicates how long the painted bicycle frames must wait at the assembly work center before they can be processed2. For example, if there is a delay between the arrival of the frames and the start of the assembly, you can enter a value that reflects this delay in the queue time before field and select the appropriate unit.
The other options are not correct, because they do not involve queue times. Building capabilities for each resource related to color would allow you to assign resources based on their color proficiency, but it would not account for paint drying time. Entering a value in the transit time on the painting operation would indicate how long it takes to move the painted bicycle frames from one work center to another, but it would not include the waiting time before or after the movement. Making a resource group for each size and color and assigning that group to the operation would allow you to group resources that have similar characteristics and can be used interchangeably in production, but it would not affect the queue times.
1: Queue times 2: Set up operations scheduling
질문 # 63
An automobile manufacturer leases cars to companies for use as company cars.
A car leased to a company breaks down and requires repairs.
You must open a maintenance request and replace the car with an equivalent model until the original car is repaired and returned to the company. When the manufacture' receives and inspects the car, the replacement car can be released to the company.
You need to select the maintenance request components to use.
Which components should you use? To answer, drag the appropriate components to the correct assets. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Note: Each correct selection is worth one point.
정답：
설명：
Explanation:
To select the maintenance request components to use, you should use the following:
* The leased car that must be repaired: You should use the Inbound asset component. An inbound asset is an asset that is received from a customer or vendor for maintenance or repair1. You can use the Inbound assets page to create and manage inbound assets in Asset Management2. You can also create a maintenance request for an inbound asset and link it to a work order3.
* The replacement car for the leased car: You should use the Outbound asset component. An outbound asset is an asset that is sent to a customer or vendor as a temporary replacement for an asset that is being maintained or repaired1. You can use the Outbound assets page to create and manage outbound assets in Asset Management. You can also link an outbound asset to an inbound asset or a work order.
1: Inbound and outbound assets 2: Inbound assets 3: Create a maintenance request for an inbound asset :
[Outbound assets]
질문 # 64
......
MB-335덤프공부: https://www.koreadumps.com/MB-335_exam-braindumps.html
참고: KoreaDumps에서 Google Drive로 공유하는 무료, 최신 MB-335 시험 문제집이 있습니다: https://drive.google.com/open?id=13_zWlDUDZ6LarW9rCsKKO6fWP2SUAp0n