높은적중율을자랑하는NSE6_FMG_AD-7.6시험대비덤프최신샘플문제최신덤프

우리 Fast2test에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리Fortinet NSE6_FMG_AD-7.6인증시험을 패스하고 싶으시다면 우리 Fast2test를 장바구니에 넣으시죠 . Fast2test는 여러분의 아주 좋은 합습가이드가 될것입니다. Fast2test로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.

Fortinet NSE6_FMG_AD-7.6 Exam Syllabus Topics:

Section	Weight	Objectives
Administration	20%	- FortiManager system features and architecture - Administrative Domains (ADOMs) creation and configuration - Initial system configuration and setup
Troubleshooting	10%	- Deployment and installation issues - System performance and connectivity troubleshooting - ADOM and device synchronization problems
Device Manager	25%	- Revision history and configuration rollback - Using scripts for configuration changes - Registering and managing devices in ADOMs
Advanced Configuration	15%	- FortiManager High Availability (HA) setup - FortiGuard services and distribution server - Global ADOM and multi-ADOM environments
Policy and Objects	30%	- Workspace mode and policy import/installation - Global database and ADOM policy inheritance - Policy package creation and management - Shared and dynamic objects management

>> NSE6_FMG_AD-7.6시험대비 덤프 최신 샘플문제 <<

NSE6_FMG_AD-7.6시험대비 덤프 최신 샘플문제 인증시험패스하여 자격증 취득하기

다년간 IT업계에 종사하신 전문가들이 자신의 노하우와 경험으로 제작한 Fortinet NSE6_FMG_AD-7.6덤프는 NSE6_FMG_AD-7.6 실제 기출문제를 기반으로 한 자료로서 NSE6_FMG_AD-7.6시험문제의 모든 범위와 유형을 포함하고 있어 높을 적중율을 자랑하고 있습니다.덤프구매후 불합격 받으시면 구매일로부터 60일내 주문은 덤프비용을 환불해드립니다.IT 자격증 취득은 Fast2test덤프가 정답입니다.

최신 NSE 6 Network Security Specialist NSE6_FMG_AD-7.6 무료샘플문제 (Q45-Q50):

질문 # 45
Refer to the exhibit.

What are two results from the configuration shown in the exhibit? (Choose two.)

A. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out.
B. The administrator can lock policy blocks and FortiManager global ADOM.
C. The same administrator can lock more than one ADOM at the same time.
D. The administrator must have access to the ADOM to approve changes.

정답：A,C

설명：
The command set workspace-mode normal enables Workspace (ALL ADOMs). The study guide states that in this mode "All ADOMs can be locked" and workspace mode lets administrators lock ADOMs, devices, policy packages, and objects. The lab guide then gives the exact behavior for ungraceful session closure: "If a session is not closed gracefully ... FortiManager does not close the administrator session until it times out or the session is deleted. Until this time, the ADOM remains in a locked state." That directly proves A.
C is also verified by the lab guide statement: "If an administrator locked one or more ADOMs, and then logs out of FortiManager, all of those ADOMs are unlocked." The phrase "one or more ADOMs" confirms the same administrator can lock multiple ADOMs at once.
D is a workflow mode approval concept, not workspace normal.

질문 # 46
Refer to the exhibits.

FortiGate HQ-NGFW-1 downloads and validates FortiGuard databases from FortiManager which acts as a local FortiGuard Distribution Server (FDS) in a closed network. An administrator pushes a new firewall policy with an intrusion prevention system (IPS) profile from FortiManager to FortiGate HQ- NGFW-1 However, FortiGate does not recognize the new IPS signature from FortiManager.
What is the most likely reason why FortiGate HQ-NGFW-1 does not recognize the new IPS signature?

A. FortiGate must enable rating for the FortiManager IP address, 192.168.1.120, in server list 1.
B. The administrator must enable the fortiguard-anycast option to correctly download all signatures from the local FDS.
C. The administrator must enable IPv6 connections for FortiGuard services on FortiManager.
D. FortiManager and FortiGate have different IPS database versions.

정답：D

설명：
The most likely reason FortiGate HQ-NGFW-1 does not recognize the new IPS signature is that FortiManager and FortiGate have different IPS database versions. The FortiManager may have pushed a signature update that FortiGate has not yet synchronized or validated locally, causing the signature to be unrecognized.

질문 # 47
Refer to Exhibit:

An administrator admin used the Configuration Revision History window to revert the FortiGate device configuration to revision ID 6. After running the reinstall policy package, the administrator noticed problems with the firewall policy- they could not see the unset comment on policy ID 1.
Why did FortiManager not remove the comment from policy ID 1 when the administrator ran reinstall policy package?

A. Because the administrator student must install the configuration changes to correctly see the expected results.
B. Because the administrator must import the firewall policies to update the firewall policy package.
C. Because every time the administrator uses the revert config file, they must use the Install Wizard instead of running the reinstall policy package.
D. Because the administrator used the Revision Diff view, which shows what changed, not what will be installed.

정답：B

설명：
The correct answer is B. The FortiManager 7.6 Administrator Study Guide gives the exact extract:
"Performing a revert operation followed by an installation only reverts device-level changes and does not revert policy packages. To achieve full synchronization, you must run the Import Configuration tool on FortiManager to synchronize the policy package." The guide also states: "After every retrieve, auto-update, or revert operation, you must use Import Configuration to ensure the policy information is synchronized." In the exhibit, the missing unset comment for policy ID 1 is a policy package issue, not just a device-level revert issue. Reinstalling the existing policy package does not automatically rebuild it from the reverted revision. The administrator must import the firewall policies again so the policy package reflects the reverted policy state. That is why the comment was not removed.
=========

질문 # 48
What can you conclude from the failed installation log shown in the exhibit?

A. Policy ID 2 is installed without the remote user student.
B. Policy ID 2 is installed in the disabled state.
C. Policy ID 2 is installed without a source address.
D. Policy ID 2 will not be installed.

정답：A

설명：
The correct answer is D. The lab guide explains that when an installation fails, the installation log shows the commands that the managed device received and accepted, as well as the commands that the managed device did not accept.
From the exhibit, FortiGate accepted the policy creation commands for policy ID 2 such as set srcintf port3, set dstintf port1, set srcaddr all, set dstaddr all, set action accept, and set schedule always. However, the line set users student failed with "entry not found in datasource" and "value parse error before ' student ' ". That shows the user reference was not accepted, while the rest of the policy commands were processed. Therefore, policy ID 2 is still created, but without the remote user student. This rules out A, B, and C.
=========

질문 # 49
Refer to the exhibit.

An administrator assigned a new policy package to FortiGate HQ-NGFW-1. In the installation preview, they noticed some settings they did not modify and are unsure about the changes.
Based on the exhibit, which two things will happen if they continue with the installation? (Choose two.)

A. FortiGate HQ-NGFW-1 can use FortiManager firmware templates to upgrade firmware and ratings.
B. FortiGate HQ-NGFW-1 can contact the FortiManager acting as FortiGuard Distribution Server (FDS) to download FortiGuard updates.
C. FortiManager will install the CA certificate named root_CA3 to authenticate FortiGate-to-FortiManager communication protocol (FGFM) tunnel connections with FortiGate HQ- NGFW-1.
D. FortiGate HQ-NGFW-1 will use the root_CA3 certificate in firewall address objects or policies.

정답：B,C

설명：
The configuration includes a server-list with server-type set to " update rating, " which enables FortiGate HQ- NGFW-1 to contact FortiManager as a FortiGuard Distribution Server (FDS) for FortiGuard updates.
The installation includes a root_CA3 certificate, which FortiManager will install on FortiGate HQ-NGFW-1 to authenticate FGFM tunnel connections between the devices.

질문 # 50
......

Fast2test의 Fortinet인증 NSE6_FMG_AD-7.6덤프는 최근 유행인 PDF버전과 소프트웨어버전 두가지 버전으로 제공됩니다.PDF버전을 먼저 공부하고 소프트웨어번으로 PDF버전의 내용을 얼마나 기억하였는지 테스트할수 있습니다. 두 버전을 모두 구입하시면 시험에서 고득점으로 패스가능합니다.

NSE6_FMG_AD-7.6퍼펙트 덤프샘플 다운로드: https://kr.fast2test.com/NSE6_FMG_AD-7.6-premium-file.html