P.S. Free & New JN0-481 dumps are available on Google Drive shared by Exam4Tests: https://drive.google.com/open?id=1nUhiBN4q7sYnjanOBGym47WFoT7rooCG
You can practice all the difficulties and hurdles which could be faced in an actual Juniper exam. It also assists you in boosting confidence and reducing problem-solving time. The Pass4future designs JN0-481 desktop-based practice software for desktops, so you can install it from a website and then use it without an internet connection. You only need an internet connection to verify the license of the products. No other plugins are required to employ it.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Dear, hurry up to get the 100% pass JN0-481 exam study dumps for your preparation. You will get original questions and verified answers for the Juniper certification. After purchase of the JN0-481 exam dumps, you can instant download the JN0-481 practice torrent and start your study with no time wasted. The validity and useful JN0-481 will clear your doubts which will be in the actual test. When you prepare well with our JN0-481 pdf cram, the 100% pass will be easy thing.
NEW QUESTION # 67
In Juniper Apstra, what is the primary purpose of a Property Set?
Answer: B
Explanation:
A Property Set in Juniper Apstra defines a collection of reusable key-value pairs that can be referenced within Configlets or other parts of the design. This enables dynamic, parameterized configuration generation, allowing the same Configlet template to render differently based on the property values assigned to different blueprints or devices.
NEW QUESTION # 68
Which attribute enables Juniper Apstra to scale and manage thousands of devices with a single server instance?
Answer: A
Explanation:
The attribute that enables Juniper Apstra to scale and manage thousands of devices with a single server instance is that Apstra is a distributed state system. This means that Apstra uses a graph database to store the network topology and configuration data in a distributed and replicated manner across multiple server nodes. This allows Apstra to handle large-scale networks with high performance, reliability, and availability. Apstra also uses a stateful orchestration engine that ensures the network state is always consistent with the intent of the blueprint, which is the logical representation of the network design and behavior. Apstra can automatically detect and resolve any discrepancies between the desired and actual network state, as well as handle any changes or failures in the network.
NEW QUESTION # 69
What is correct about the selected device shown in the exhibit?
Answer: B
Explanation:
In the exhibit, the selected node node100 is labeled as a Generic System. In Juniper Apstra, a generic system represents an external device (such as a server, firewall, or third-party system) that connects to the fabric but is not managed as part of the internal fabric infrastructure.
Therefore, it is an external generic system.
NEW QUESTION # 70
You have a configuration deviation in the Juniper Apstra dashboard. What does this anomaly indicate in this scenario?
Answer: C
Explanation:
A configuration deviation (also called a configuration anomaly) in Apstra indicates that the device's running configuration differs from Apstra's intended (golden) configuration for that node. In day-to-day operations, this most commonly occurs when an operator makes a change outside of Apstra's control, such as entering commands directly on the device CLI (for example, on a Junos v24.4 switch), using another automation system, or applying an out-of-band configuration method.
Apstra continuously compares the device's operational configuration against what it expects based on blueprint intent. When it detects drift, it raises a deviation anomaly so operators can decide how to restore compliance. Typical remediations are either (1) remove/revert the out-of-band change so the device matches intent again, or (2) explicitly acknowledge the change in Apstra (for example, via an accept/suppress workflow, depending on the exact UI action and version), so the deviation is no longer treated as unexpected.
While it is also possible for a deviation to be triggered by a device not accepting a rendered command (capability mismatch), the question asks what the anomaly indicates in this scenario; the primary meaning of "configuration deviation" is configuration changed outside of Apstra and therefore the network is no longer aligned with the intended state. That corresponds to option C.
NEW QUESTION # 71
Which two actions are required during Juniper Apstra's deploy phase? (Choose two.)
Answer: A,B
Explanation:
The deploy phase is the final step in the Juniper Apstra data center fabric design and deployment process. In this phase, you apply the Apstra-rendered configuration to the devices and verify the intent of the blueprint. Based on the web search results, we can infer the following actions are required during the deploy phase12:
Assign device profiles to the blueprint. This action associates a specific vendor model to each logical device in the blueprint. Device profiles contain extensive hardware model details, such as form factor, ASIC, CPU, RAM, ECMP limit, and supported features. Device profiles also define how configuration is generated, how telemetry commands are rendered, and how configuration is deployed on a device. Device profiles enable the Apstra system to render and deploy the configuration according to the Apstra Reference Design34.
Assign resources to the blueprint. This action allocates the physical devices, IP addresses, VLANs, and ASNs to the logical devices, networks, and routing zones in the blueprint. Resources can be assigned manually or automatically by the Apstra system. Assigning resources ensures that the blueprint has all the necessary elements to generate the configuration and deploy the fabric5 .
Assign user roles to the blueprint. This action is not required during the deploy phase. User roles are defined at the system level, not at the blueprint level. User roles determine the permissions and access levels of different users in the Apstra system. User roles can be system-defined or custom-defined .
Assign interface maps to the blueprint. This action is not required during the deploy phase. Interface maps are defined at the design phase, not at the deploy phase. Interface maps are objects that map the logical interfaces of a logical device to the physical interfaces of a device profile. Interface maps enable the Apstra system to generate the correct interface configuration for each device in the fabric . Reference:
Deploy
Deploy Device
Device Profiles
Juniper Device Profiles
Resources
NEW QUESTION # 72
......
In today's competitive industry, only the brightest and most qualified candidates are hired for high-paying positions. Obtaining JN0-481 is a wonderful approach to be successful because it can draw in prospects and convince companies that you are the finest in your field. Pass the JN0-481 Exam to establish your expertise in your field and receive certification. However, passing the Data Center, Specialist (JNCIS-DC) JN0-481 exam is challenging.
Books JN0-481 PDF: https://www.exam4tests.com/JN0-481-valid-braindumps.html
DOWNLOAD the newest Exam4Tests JN0-481 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1nUhiBN4q7sYnjanOBGym47WFoT7rooCG