P.S. Free & New NSE7_OTS-7.2 dumps are available on Google Drive shared by CramPDF: https://drive.google.com/open?id=10Ew9lnGckVWBD5aom2p8eF4eco0tTHWc
If you want to finish it with minimum efforts, CramPDF Fortinet NSE7_OTS-7.2 test questions and answers is your best choice. CramPDF Fortinet NSE7_OTS-7.2 test contains high quality exam dumps. Like the actual test, CramPDF test questions and test answers is of the same standard. Now, the best choice is to choose CramPDF Fortinet NSE7_OTS-7.2 Certification Training for exam preparation. You must pass at 100%. If you fail, FULL REFUND is allowed.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Risk Assessment | 25% | - Security event analysis and reporting - Logging and monitoring with FortiAnalyzer, FortiSIEM - Risk assessment and mitigation strategies - Security automation and response |
| Protecting OT Network | 25% | - Industrial protocol security - IPS and application control for OT environments - Threat prevention and filtering - Security policy design for ICS/SCADA |
| Network Access Control | 25% | - Industrial network protocols and standards - Availability and redundancy design - Network segmentation between IT and OT - Device authentication and authorization |
| Asset Management | 25% | - Asset inventory and lifecycle management - OT asset identification and classification - Vulnerability assessment for OT assets |
>> Actual NSE7_OTS-7.2 Test Pdf <<
The online version of our NSE7_OTS-7.2 exam questions is convenient for you if you are busy at work and traffic. Wherever you are, as long as you have an access to the internet, a smart phone or an I-pad can become your study tool for the NSE7_OTS-7.2 exam. This version can also provide you with exam simulation. And the good point is that you don't need to install any software or app. All you need is to click the link of the online NSE7_OTS-7.2 Training Material once, and then you can learn and practice offline.
NEW QUESTION # 26
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
Answer: D
Explanation:
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
* Allow: The FortiGate unit allows the traffic without any further inspection.
* Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
* Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
* The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
* The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
* The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
* The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
* The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 27
Refer to the exhibits. Which statement about some of the generated report elements from FortiAnalyzer is true?
Answer: C
NEW QUESTION # 28
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
Answer: A,C
NEW QUESTION # 29
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM. Which step must the administrator take to achieve this task?
Answer: B
Explanation:
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 30
What is the primary objective of implementing SD-WAN in operational technology (OT) networks'?
Answer: A
NEW QUESTION # 31
......
Fortinet NSE7_OTS-7.2 exam certification is widely recognized IT certifications. People around the world prefer NSE7_OTS-7.2 exam certification to make their careers more strengthened and successful. Speaking of Fortinet NSE7_OTS-7.2 exam, CramPDF Fortinet NSE7_OTS-7.2 exam training materials have been ahead of other sites. Because CramPDF has a strong IT elite team, they always follow the latest Fortinet NSE7_OTS-7.2 Exam Training materials, with their professional mind to focus on Fortinet NSE7_OTS-7.2 exam training materials.
NSE7_OTS-7.2 Valid Exam Review: https://www.crampdf.com/NSE7_OTS-7.2-exam-prep-dumps.html
2026 Latest CramPDF NSE7_OTS-7.2 PDF Dumps and NSE7_OTS-7.2 Exam Engine Free Share: https://drive.google.com/open?id=10Ew9lnGckVWBD5aom2p8eF4eco0tTHWc