P.S. Free & New JN0-352 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=12m2BcCO6FJgrNUuFcuB90HHYPoihJAYk
No matter where you are or what you are, JN0-352 practice questions promises to never use your information for commercial purposes. If you attach great importance to the protection of personal information and want to choose a very high security product, JN0-352 Real Exam is definitely your first choice. And we always have a very high hit rate on the JN0-352 study guide by our customers for our high pass rate is high as 98% to 100%.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: OSPF | 15-20% | - Configuration, verification and troubleshooting - Neighbor formation, area design and LSA types - Route summarization and redistribution |
| Topic 2: Layer 2 Security | 10-15% | - DHCP snooping, Dynamic ARP Inspection and IP Source Guard - Port security, MAC limiting and storm control - Layer 2 firewall filters and security features |
| Topic 3: IS-IS | 10-15% | - Adjacency establishment, levels and metrics - Scalable enterprise deployment and troubleshooting - Configuration and route exchange |
| Topic 4: Tunnels and Overlays | 5-10% | - Overlay network design and connectivity - GRE, IP-IP and dynamic tunnel configuration - Tunnel types, encapsulation and operation |
| Topic 5: High Availability and Resiliency | 5-10% | - Network resiliency design and troubleshooting - Graceful restart and non-stop routing - Redundancy protocols and failover mechanisms |
| Topic 6: BGP | 15-20% | - Neighbor relationships and session establishment - Routing policies, filtering and common troubleshooting - Route advertisement, attributes and path selection |
| Topic 7: Layer 2 Switching and VLANs | 15-20% | - VLAN concepts, configuration, trunking and tagging - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration - Link Aggregation Groups (LAG) and Virtual Chassis |
| Topic 8: IP Multicast | 5-10% | - IGMP operation and configuration - Multicast routing monitoring and troubleshooting - PIM Dense Mode, Sparse Mode and RP mechanisms |
| Topic 9: Protocol Independent Routing | 10-15% | - Basic routing policy and filter operation - Routing instances and route selection criteria - Routing tables, static routes and route preference |
>> JN0-352 Latest Test Simulator <<
Genius is 99% of sweat plus 1% of inspiration. You really don't need to think that you can succeed for nothing. If you still have a trace of enterprise, you really want to start working hard! Our JN0-352 exam questions are the most effective helpers on your path. As the high pass rate of our JN0-352 study braindumps is as 98% to 100%, you can pass the exam without any doubt. And with the JN0-352 certification, you will lead a better life!
NEW QUESTION # 91
What is the default MAC age-out timer on an EX Series switch?
Answer: B
Explanation:
The default MAC age-out timer on an EX Series switch is 300 seconds. The MAC age-out timer is the maximum time that an entry can remain in the MAC table before it "ages out," or is removed.
This configuration can influence efficiency of network resource use by affecting the amount of traffic that is flooded to all interfaces. When traffic is received for MAC addresses no longer in the Ethernet routing table, the router floods the traffic to all interfaces.
NEW QUESTION # 92
Refer to Exhibit:
You have applied a firewall filter as an ingress filter on the ge-0/0/0 interface of your Juniper Networks EX Series Switch as shown in the exhibit. An external host sends an ICMP ping packet to the router.
Which statement is correct about how this packet is processed?
Answer: B
Explanation:
Junos firewall filters evaluate terms sequentially from top to bottom, and a term is only terminal for a packet if its then clause contains an explicit terminating action such as accept, discard, reject, or next term without a match. The count and log actions used in track-icmp are non-terminating; they update statistics and generate a log entry but do not stop evaluation, so a matching ICMP packet falls through to the next term after being counted. The second term, allow-tcp-established, matches only TCP packets carrying the ACK or RST flags as defined by the tcp-established keyword; an ICMP echo request does not satisfy protocol tcp, so this term is skipped entirely and does not accept the packet. Evaluation therefore reaches the implicit catch-all term block- rest, which has no from conditions and matches every remaining packet, incrementing blocked-counter and discarding it. The net effect for the described ICMP ping is that icmp-counter is incremented by the first term, the packet is neither accepted nor rejected by the second term, and blocked-counter is incremented immediately before the packet is silently discarded by the final term. This layered-term behavior, where counting is independent of the accept/discard decision, is a frequently tested nuance of Junos firewall filter processing logic. Reference topics: Junos Enterprise Switching - Layer 2 Security and Firewall Filters, Filter Term Evaluation Order.
NEW QUESTION # 93
You are required to ensure that Switch 1 will always be designated as the root bridge when participating in your switched network.
What do you need to do to satisfy this requirement?
Answer: B
Explanation:
Because root bridge election is decided primarily by comparing bridge priority values - with the switch advertising the numerically lowest priority always winning, and MAC address serving only as a fallback tiebreaker when priorities are tied - the only deterministic, reliable way to guarantee that a specific switch is elected root regardless of any other switch's hardware characteristics is to explicitly configure that switch with a lower bridge priority than every other participating switch in the topology. Relying on MAC address alone, as the first distractor suggests, is fundamentally unreliable: MAC addresses are burned in at the factory, cannot be predicted or controlled by the administrator, and any future hardware replacement or newly introduced switch with a numerically lower MAC address could unexpectedly seize the root role since MAC comparison only comes into play at equal priority in the first place, meaning a 'highest MAC' strategy does not even align with how the tiebreak actually favors the lowest value. Port priority and port cost are entirely separate STP parameters that influence which port on a non-root switch is selected as its root port, or which port is selected as designated versus blocking on a given segment; neither parameter has any bearing whatsoever on which switch is elected root bridge for the whole topology, since that decision is made purely from the Bridge ID comparison, independent of any per-port settings. Explicitly and deliberately lowering Switch 1's configured bridge priority is the only correct, industry-standard method. Reference topics: Junos Enterprise Switching - Spanning Tree Protocols, Guaranteeing Root Bridge Placement via Bridge Priority.
NEW QUESTION # 94
Referring to the exhibit, what will be the IS-IS adjacency result of the configurations?
Answer: B
NEW QUESTION # 95
You are deploying a Juniper Networks EX Series Switch to connect 24 end devices to VLAN 70, with an uplink interface to a distribution switch that carries VLANs 30, 50, and 70. You need to correctly configure the interface type for the end-device interfaces.
In this scenario, which statement is correct?
Answer: C
Explanation:
Each of the 24 end-device-facing interfaces in this scenario needs to carry traffic for exactly one VLAN, and the end devices themselves are ordinary hosts that neither expect nor generate 802.1Q-tagged frames. This is precisely the definition of an access port in Junos: family ethernet-switching interface-mode is set to access, and a single vlan members statement assigns the port to VLAN 70. Access mode ensures frames egressing toward the host are untagged and any frames received are implicitly treated as belonging to the configured VLAN, which is both simpler to manage and more efficient than trunking, since access ports do not carry the
802.1Q tag overhead nor process VLAN pruning logic relevant only to multi-VLAN links. Trunk mode, by contrast, is reserved for switch-to-switch or switch-to-router links that must simultaneously carry frames for multiple VLANs, such as the uplink toward the distribution switch that transports VLANs 30, 50, and 70 together - configuring the 24 host-facing ports as trunks (with or without a native VLAN) would be functionally incorrect and operationally wasteful, since end devices have no need to interpret VLAN tags.
There is also no such behavior in Junos where VLAN-ID numeric value dictates default port behavior, making the 'no configuration needed' option a distractor with no basis in EX Series switching architecture.
Reference topics: Junos Enterprise Switching - VLANs, Configuring Access and Trunk Port Modes.
NEW QUESTION # 96
......
In addition, you can print these Juniper JN0-352 PDF questions for paper study in this format of Pass4suresVCE product frees you from restrictions of time and place as you can study JN0-352 exam questions from your comfort zone in your spare time. The second version is the web-based format of the Juniper JN0-352 Practice Test. Browsers such as Internet Explorer, Microsoft Edge, Firefox, Safari, and Chrome support the web-based practice exam.
JN0-352 Test Simulator: https://www.pass4suresvce.com/JN0-352-pass4sure-vce-dumps.html
P.S. Free 2026 Juniper JN0-352 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=12m2BcCO6FJgrNUuFcuB90HHYPoihJAYk