Our H19-404_V1.0 study guide in order to allow the user to form a complete system of knowledge structure, the qualification examination of test interpretation and supporting course practice organic reasonable arrangement together, the H19-404_V1.0 simulating materials let the user after learning the section, and each section between cohesion and is closely linked, for users who use the H19-404_V1.0 training quiz to build a knowledge of logical framework to create a good condition.
| Section | Objectives |
|---|---|
| CloudCampus and Intelligent Campus Solutions | - CloudCampus Architecture
|
| Campus WLAN Planning and Design | - WLAN Technologies
|
| Campus SD-WAN Planning and Design | - SD-WAN Solutions
|
| Huawei Campus Network Products and Solutions | - Campus Network Product Portfolio
|
| Campus Network Solution Architecture and Design | - Enterprise Campus Network Architecture
|
| Pre-sales Methodology and Solution Presentation | - Pre-sales Skills
|
| Industry Scenario Solution Design | - Industry-Oriented Campus Solutions
|
| Campus Network Security Design | - Security Planning
|
If the user fails in the H19-404_V1.0 exam questions for any reason, we will refund the money after this process. In addition, we provide free updates to users for one year long. If the user finds anything unclear in the H19-404_V1.0 practice materials exam, we will send email to fix it, and our team will answer all of your questions related to the H19-404_V1.0 Guide prep. What is more, we provide the free demows of our H19-404_V1.0 study prep for our customers to download before purchase.
NEW QUESTION # 30
Which of the following wireless security standards was proposed by China?
Answer: C
Explanation:
WAPI, or WLAN Authentication and Privacy Infrastructure, is the wireless LAN security standard proposed by China. It provides wireless link authentication and data-protection mechanisms and was developed as an alternative security framework for WLAN environments. Huawei's training material explicitly identifies WAPI as a WLAN security standard proposed in China and states that it provides stronger protection than legacy WEP and WPA mechanisms.
WPA, WPA2, and WPA3 belong to the Wi-Fi Protected Access family maintained through Wi-Fi industry certification. WPA was introduced as an interim improvement over WEP. WPA2 adopted stronger IEEE
802.11i security mechanisms, including AES-based CCMP. WPA3 later introduced stronger password- authentication and enterprise-security options.
WAPI incorporates authentication and encryption as part of an integrated wireless security architecture. Its deployment depends on regional requirements, terminal compatibility, AP support, and the organization's regulatory or cryptographic-policy obligations. The question asks which standard originated as a Chinese wireless security standard, not which standard is most widely deployed internationally. Therefore, WAPI is the only correct choice, making option B the verified answer.
NEW QUESTION # 31
Intelligent policy recommendation can achieve network-level load balancing.
Answer: B
Explanation:
The statement is true. Intelligent policy recommendation does not consider only the traffic load of an individual interface or device. iMaster NCE-Campus obtains network topology, application, link-quality, bandwidth-utilization, and traffic-distribution information from multiple devices. It can then recommend or orchestrate policies that distribute traffic across the network's available paths and resources.
For example, when multiple WAN links have the same priority and satisfy an application's SLA requirements, per-flow load balancing can distribute different application flows among those links.
Bandwidth-proportional balancing can also account for differences in link capacity, preventing a lower- bandwidth link from being overloaded. Huawei explains that load-balancing-based traffic steering can fully utilize multiple links and distribute flows across links meeting the required SLA.
Because iMaster NCE-Campus centrally manages CPEs and uniformly orchestrates service intent across the overlay network, recommendations can be evaluated from a network-wide perspective instead of through isolated local decisions. Therefore, intelligent policy recommendation can implement network-level load balancing.
NEW QUESTION # 32
Which of the following BGP NLRI address-family combinations is used to transmit SD-WAN tunnel encapsulation information?
Answer: D
Explanation:
AFI 1 with SAFI 74 is the correct combination. In Multiprotocol BGP, the Address Family Identifier defines the basic network-layer address family, while the Subsequent Address Family Identifier specifies how the associated NLRI is interpreted. AFI 1 represents IPv4. SAFI 74 is assigned for SD-WAN capabilities and is used to distribute information required for SD-WAN edge discovery and tunnel establishment, including transport and encapsulation-related attributes.
The other combinations represent different forms of reachability information. AFI 1/SAFI 1 is ordinary IPv4 unicast NLRI. AFI 1/SAFI 2 represents IPv4 multicast reachability. AFI 25 represents Layer 2 VPN information, while SAFI 70 represents Ethernet VPN routes; that combination is associated with EVPN rather than the specific SD-WAN capability NLRI requested.
Huawei's architecture uses BGP-based control channels to exchange transport network port information, IPsec security-association information, and service routes. These parameters allow edge devices to determine peer endpoints and create GRE or GRE-over-IPsec data channels after the relevant service routes trigger tunnel establishment.
NEW QUESTION # 33
What is the function of the PROFINET DCP?
Answer: B
Explanation:
PROFINET DCP, meaning Discovery and Basic Configuration Protocol, is used during device discovery and initial network configuration. It operates at the data-link layer and enables an engineering station or PROFINET IO controller to locate devices on the local Ethernet segment, identify them by MAC address or station name, assign a PROFINET device name, and configure IP parameters such as the IP address, subnet mask, and default gateway.
DCP is therefore not responsible for normal cyclic process-data exchange. Real-time PROFINET communication performs that function after the controller and I/O device have been configured and an application relationship has been established. Alarm exchange and acyclic parameterization are also handled through other PROFINET communication relationships and services.
The distinction matters during commissioning. A new I/O device may initially have no usable IP configuration. DCP allows the controller or engineering tool to discover it at Layer 2 and provision the identity and addressing information required before higher-layer communication can begin. PROFINET documentation identifies DCP as mandatory for assigning IP addresses and configuring station names on the local network.
NEW QUESTION # 34
Which of the following are WAN interconnection models for multi-branch campus networks?
Answer: B,C,D
Explanation:
Huawei SD-WAN supports full-mesh, hub-spoke, and partial-mesh interconnection models. In a full-mesh topology, every site can communicate directly with the other sites. This model minimizes intermediate forwarding and is appropriate when branches frequently exchange latency-sensitive traffic such as voice, video, or collaborative application data.
In a hub-spoke topology, branch sites communicate with a central headquarters or data-center hub. Branch-to- branch traffic normally traverses that hub. The model is simple, scalable, and suitable for enterprises whose applications and shared resources are concentrated at headquarters.
Partial-mesh is used when most sites can communicate directly but some sites lack direct underlay connectivity or do not require direct tunnels. Those sites can communicate through a redirect or intermediate site. Huawei describes full-mesh, hub-spoke, and partial-mesh as supported topology designs and explains the role of a redirect site in partial-mesh networking.
"Partial-spoke" is not a defined SD-WAN topology model. A spoke is a role within hub-spoke networking rather than an independent partial-spoke topology. Therefore, A, B, and D are correct.
NEW QUESTION # 35
......
Our company conducts our H19-404_V1.0 real questions as high quality rather than unprincipled company which just cuts and pastes content into their materials and sells them to exam candidates. We have always been the vanguard of this field over ten years. It means we hold the position of supremacy of H19-404_V1.0 practice materials by high quality and high accuracy. Besides, all exam candidates who choose our H19-404_V1.0 real questions gain unforeseen success in this exam, and continue buying our H19-404_V1.0 practice materials when they have other exam materials’ needs. It is our running tenet to offer the most considerate help and services for exam candidates just like you. By virtue of our H19-404_V1.0 Study Tool, many customers get comfortable experiences of whole package of services and of course passing the H19-404_V1.0 exam successfully. Just hold the supposition that you may fail the exam even by the help of our H19-404_V1.0 study tool, we can give full refund back or switch other versions for you to relieve you of any kind of losses. What is more, we offer supplementary content like updates for one year after your purchase.
Training H19-404_V1.0 For Exam: https://www.topexamcollection.com/H19-404_V1.0-vce-collection.html