P.S. Free 2026 F5 F5CAB3 dumps are available on Google Drive shared by PracticeMaterial: https://drive.google.com/open?id=16LRtVBSPQR12sX_5mLB6_2VHGFqJM84k
The F5CAB3 study guide to good meet user demand, will be a little bit of knowledge to separate memory, but when you add them together will be surprised to find a day we can make use of the time is so much debris. The F5CAB3 exam prep can allow users to use the time of debris anytime and anywhere to study and make more reasonable arrangements for their study and life. Choosing our F5CAB3 simulating materials is a good choice for you, and follow our step, just believe in yourself, you can do it perfectly!
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
The PracticeMaterial wants to win the trust of F5 F5CAB3 exam candidates at any cost. To fulfill this objective the PracticeMaterial is offering top-rated and real F5CAB3 exam practice test in three different formats. These F5CAB3 exam question formats are PDF dumps, web-based practice test software, and web-based practice test software. All these three F5CAB3 Exam Question formats contain the real, updated, and error-free F5CAB3 exam practice test.
NEW QUESTION # 84
Due to a change in application requirements, a BIG-IP Administrator needs to modify the configuration of a Virtual Server to include a Fallback Persistence Profile.
Which persistence profile type should the BIG-IP Administrator use?
Answer: B
Explanation:
Fallback persistence is used when the primary persistence method fails. Source Address Affinity is a Layer 4 persistence method and is fully supported as a fallback option for most virtual server types.
NEW QUESTION # 85
A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers.
Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server? (Choose one answer)
Answer: C
Explanation:
In this scenario, each backend node (server) hosts multiple services and is referenced by multiple pools and virtual servers. The goal is to ensure an equal number of total connections per backend server, regardless of how many pool members (services/ports) exist on that server.
According to the BIG-IP Administration: Data Plane Configuration documentation:
* Least Connections (node) tracks the total number of active connections to a node across all pool members and services.
* This algorithm ensures load distribution is balanced at the server level, not just at the individual service (member) level.
* It is specifically recommended when:
* Multiple pool members exist on the same backend server
* Multiple virtual servers reference the same backend servers
Why the other options are incorrect:
* B. Predictive (member)Predictive algorithms are advanced and traffic-pattern based, but they operate at the member level and do not guarantee equal connections per server.
* C. Least Connections (member)This balances connections per pool member, which can overload a server hosting multiple members while still appearing "balanced" per member.
* D. Predictive (node)Although node-aware, predictive algorithms are less deterministic and not the best choice when strict equality of connections is required.
Correct Resolution:
Using Least Connections (node) ensures that each backend server carries an equal connection load across all services and pools.
NEW QUESTION # 86
A BIG-IP Administrator configures a node with a standard icmp Health Monitor. The Node shows as DOWN although the Backend Server is configured to answer ICMP requests. Which step should the administrator take next to find the root cause of this issue?
Answer: A
Explanation:
In the F5 BIG-IP ecosystem, a standard ICMP health monitor functions by sending an ICMP echo request to a target node and expecting an ICMP echo reply within a specified timeout period. When a node is marked
"DOWN" despite the backend server being configured to respond to ICMP, the issue typically lies in the network path or the specific packet exchange between the BIG-IP's self IP and the node's IP. Running a tcpdump is the most effective next step because it provides a real-time packet capture of the actual monitor traffic leaving the BIG-IP and any return traffic coming back from the server. This allows the administrator to verify if the BIG-IP is actually sending the echo request, if the request is reaching the server, and if the server is indeed replying or if the reply is being dropped by an intermediate firewall or a security policy.
While other tools have their place, they are inappropriate for this specific layer 3/4 connectivity issue. A qkview is a comprehensive diagnostic file used primarily for F5 Support to analyze the entire system's state but is overkill for initial connectivity troubleshooting. An ssldump is used for inspecting SSL/TLS handshakes and encrypted payloads, which is irrelevant for a non-encrypted ICMP monitor. A curl command is a tool for testing HTTP/HTTPS application-level responses; it cannot be used to troubleshoot ICMP (ping) connectivity directly. By using tcpdump -ni <vlan_name> host <node_ip>, the administrator can see the ICMP "type 8" (request) and "type 0" (reply) packets, immediately identifying if the monitor failure is due to a "Destination Unreachable" message or a simple lack of response, thereby pinpointing the root cause in the data plane.
NEW QUESTION # 87
Refer to the exhibit.
A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B.
Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable? (Choose one answer)
Answer: D
Explanation:
From the exhibit, the pool contains different applications on different service ports (for example, HTTP/80, FTP/21, HTTPS/443, SSH/22). To mark pool members correctly, BIG-IP must be able to verify the actual service running on each member's port.
In BIG-IP Administration: Data Plane Configuration, monitor behavior is described as follows:
When multiple monitors are assigned to a pool, the Availability Requirement controls how monitor results are evaluated:
At least one = the pool member is marked up if any one of the assigned monitors succeeds.
All = the pool member is marked up only if every assigned monitor succeeds.
For pools containing members with different services/ports, using All can incorrectly mark members down because monitors intended for other services will fail on the wrong port.
Why C is correct:
Assigning HTTPS, HTTP, FTP, and SSH covers the actual services shown in the pool.
Setting the Availability Requirement to at least one ensures that each pool member is considered available when its appropriate service monitor succeeds, without being forced to pass unrelated service monitors.
Why the other options are incorrect:
A / D (Availability Requirement = all): would cause members to be marked down when unrelated monitors fail (e.g., SSH monitor against an HTTP member).
B (includes ICMP): ICMP can indicate the host is reachable even if the application service is down, which does not "accurately" reflect service availability.
Therefore, the best choice is HTTPS, HTTP, FTP, and SSH with Availability Requirement of at least one health monitor.
NEW QUESTION # 88
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue? (Choose one answer)
Answer: A
Explanation:
SSH is a Layer 4 TCP-based protocol that operates on TCP port 22 and does not use HTTP in any capacity. In the exhibit, the Virtual Server is configured with an HTTP Profile applied, which is inappropriate for SSH traffic and causes connection failures.
According to the BIG-IP Administration: Data Plane Configuration documentation:
* An HTTP profile must only be applied to Virtual Servers handling HTTP or HTTPS traffic.
* When an HTTP profile is attached, BIG-IP expects HTTP headers and attempts to parse application- layer data.
* Non-HTTP protocols such as SSH, FTP (control), SMTP, and other raw TCP services will fail if an HTTP profile is enabled.
Why the other options are incorrect:
* A. Set Protocol to UDPSSH uses TCP, not UDP. Changing the protocol would break SSH entirely.
* B. Set Source Address to 10.1.1.2The source address setting controls client access restrictions and is unrelated to protocol parsing issues.
* C. Set Destination Address/Mask to 0.0.0.0/0The destination address is already valid for a specific SSH service and does not impact protocol handling.
Correct Resolution:
The BIG-IP Administrator should remove the HTTP Profile (set it to None) so the Virtual Server functions as a pure Layer 4 TCP service, allowing SSH connections to pass through successfully.
NEW QUESTION # 89
......
Since the F5CAB3 study quiz is designed by our professionals who had been studying the exam all the time according to the changes of questions and answers. Our F5CAB3 simulating exam is definitely making your review more durable. To add up your interests and simplify some difficult points, our experts try their best to simplify our F5CAB3 Study Material and help you understand the learning guide better.
Valid F5CAB3 Test Materials: https://www.practicematerial.com/F5CAB3-exam-materials.html
2026 Latest PracticeMaterial F5CAB3 PDF Dumps and F5CAB3 Exam Engine Free Share: https://drive.google.com/open?id=16LRtVBSPQR12sX_5mLB6_2VHGFqJM84k