Newest JN0-352 Exam Questions: Enterprise Routing and Switching, Specialist (JNCIS-ENT) supply you high-quality Preparation Dump - FreeDumps

Before joining any platform, the Juniper JN0-352 exam applicant has a number of reservations. They want JN0-352 Questions that satisfy them and help them prepare successfully for the JN0-352 exam in a short time. Studying with Juniper JN0-352 Questions that aren't real results in failure and loss of time and money. The FreeDumps offers updated and real Juniper JN0-352 questions that help students crack the JN0-352 test quickly.

Juniper JN0-352 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: OSPF15-20%- Configuration, verification and troubleshooting
- Neighbor formation, area design and LSA types
- Route summarization and redistribution
Topic 2: High Availability and Resiliency5-10%- Graceful restart and non-stop routing
- Network resiliency design and troubleshooting
- Redundancy protocols and failover mechanisms
Topic 3: Layer 2 Security10-15%- Port security, MAC limiting and storm control
- Layer 2 firewall filters and security features
- DHCP snooping, Dynamic ARP Inspection and IP Source Guard
Topic 4: Layer 2 Switching and VLANs15-20%- Link Aggregation Groups (LAG) and Virtual Chassis
- Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration
- VLAN concepts, configuration, trunking and tagging
Topic 5: IP Multicast5-10%- PIM Dense Mode, Sparse Mode and RP mechanisms
- IGMP operation and configuration
- Multicast routing monitoring and troubleshooting
Topic 6: Protocol Independent Routing10-15%- Routing tables, static routes and route preference
- Routing instances and route selection criteria
- Basic routing policy and filter operation
Topic 7: IS-IS10-15%- Adjacency establishment, levels and metrics
- Configuration and route exchange
- Scalable enterprise deployment and troubleshooting
Topic 8: BGP15-20%- Neighbor relationships and session establishment
- Route advertisement, attributes and path selection
- Routing policies, filtering and common troubleshooting
Topic 9: Tunnels and Overlays5-10%- GRE, IP-IP and dynamic tunnel configuration
- Overlay network design and connectivity
- Tunnel types, encapsulation and operation

>> JN0-352 Reliable Study Notes <<

Unparalleled JN0-352 Reliable Study Notes, JN0-352 Books PDF

Users using our JN0-352 study materials must be the first group of people who come into contact with new resources. When you receive an update reminder from JN0-352 practice questions, you can update the version in time and you will never miss a key message. If you use our study materials, you must walk in front of the reference staff that does not use valid JN0-352 Real Exam. And you will get the according JN0-352 certification more smoothly.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q168-Q173):

NEW QUESTION # 168

Click the Exhibit button.
You have two routers on your network that are not able to establish BGP sessions.
Which two statements are correct in this scenario? (Choose two.)

Answer: A,D

Explanation:
The diagnostic output explicitly states the root cause: the local router has only the inet6-unicast address family configured for this peer, while the remote router advertised inet-unicast and inet-vpn-unicast in its OPEN message, and BGP requires at least one common negotiated address family (NLRI type) between two peers for a session to remain established; with zero overlap between the two sides' configured families, the session is torn down immediately after the OPEN exchange, which is precisely why the peer state shows Active rather than Established. This confirms the mismatched-address-family statement directly and unambiguously from the exhibit's own Down reason and Detail reason fields. The diagnostic tool's own embedded Suggestion text goes further, explicitly advising the administrator to additionally verify that the local-address configured for the peer matches the remote router's configured neighbor address and vice versa - a secondary, commonly encountered condition in which mismatched or effectively duplicated/incorrect address bindings between the two sides' neighbor statements can independently prevent a session from completing correctly, even once the family mismatch is resolved. This is why address-configuration consistency between the peers is flagged as a second concern worth checking in this scenario. Nothing in the exhibit references NTP or time synchronization at all, nor does anything in the output reference authentication, an MD5 mismatch, or any related failure signature; both of those conditions would present through entirely different diagnostic messages than the one shown here. Reference topics: Junos Enterprise Routing - BGP, Address Family Negotiation and the show bgp diagnostics neighbor Command.


NEW QUESTION # 169
Which two statements are true about the default VLAN on Juniper switches? (Choose two.)

Answer: B,C

Explanation:
On Juniper switches, the default VLAN is set to a VLAN ID of 1 by default. This means that all interfaces on the switch are members of VLAN until they are specifically assigned to another VLAN. Therefore, option A is correct.
The default VLAN ID can be changed. This allows network administrators to configure the switch to use a different VLAN as the default, if necessary. Therefore, option D is correct.


NEW QUESTION # 170
Which two fields must match in an OSPF hello packet to form an adjacency over a broadcast link? (Choose two.)

Answer: B,D

Explanation:
RFC 2328 specifies a precise set of parameters that two OSPF routers on a broadcast network must agree upon before a valid neighbor relationship can be established, and a mismatch in any of these mandatory fields causes the routers to reject each other's Hello packets outright rather than forming even a basic 2-Way state.
The network mask carried in each Hello packet must match between neighbors on a broadcast segment, since OSPF uses this field to confirm both routers agree on the subnet boundaries of the shared segment; a mismatched mask (for example, one router configured with a /24 and its neighbor with a /25 on the same physical wire) is treated as a configuration error and blocks adjacency formation. The router dead interval, which defines how long a router will wait without receiving a Hello before declaring a neighbor down, must likewise match exactly between neighbors, alongside the closely related hello interval, since these timers govern the shared expectations both sides have for how frequently Hellos should arrive and how quickly a failure should be detected; Junos explicitly checks and rejects Hello packets carrying a mismatched dead interval value. Router priority, by contrast, is intentionally allowed to differ between neighbors on the same segment - it exists precisely so that administrators can differentiate router preference for the DR/BDR election, and differing values are expected and normal rather than being blocked. The designated router field, as advertised within each Hello, is informational about the sender's current view of the segment's DR and is not a value that must be identical between the two Hello senders to permit adjacency formation. Reference topics: Junos Enterprise Routing - OSPF, Required Hello Parameter Matching on Broadcast Networks.


NEW QUESTION # 171
You are establishing a new BGP session to an EBGP peer using loopback addresses. In addition to your general EBGP settings, which BGP feature must be enabled for this session to establish?

Answer: C

Explanation:
By default, EBGP sessions are built with the expectation that peers are directly connected at Layer 3, and Junos enforces this by sending EBGP packets with a TTL of 1. When loopback addresses are used as the session endpoints instead of the directly connected physical interface addresses, the resulting IP packets must traverse at least one additional router hop between the two loopbacks, and a TTL of 1 will expire in transit before reaching the remote loopback, causing the TCP handshake -- and therefore the BGP session -- to fail even though a valid route to the peer's loopback exists. The multihop statement (configured as an EBGP multihop parameter with an accompanying TTL value, most commonly set to 2 for a single intermediate hop) instructs Junos to increase the TTL used for that peer's BGP packets so they survive the extra hop count between loopbacks. This is a mandatory addition any time an EBGP session is deliberately built against non-directly-connected addresses, whereas IBGP sessions, by contrast, do not have this default restriction because IBGP already assumes peers may be multiple hops apart within the same AS. Multipath affects load-balancing across equal-cost paths, damping suppresses flapping routes, and passive controls whether a router waits for the remote peer to initiate the TCP connection -- none of these resolve the TTL expiration problem inherent to loopback-based EBGP peering.


NEW QUESTION # 172
Click the Exhibit button. A network has three Juniper Networks EX Series Switches connected together. No changes have been made to the default spanning-tree configuration. Referring to the exhibit, which statement is correct about the root bridge?

Answer: C

Explanation:
Root bridge election is based on comparing each switch's full Bridge Identifier, which combines the bridge priority value with the switch's MAC address, with priority always evaluated first and MAC address serving strictly as a tiebreaker when two or more switches present identical priority values. In this scenario, the network has been left entirely at the default spanning-tree configuration, meaning every switch is operating at the standard IEEE and Junos default bridge priority of 32768; since all three switches share the exact same priority value, the comparison necessarily falls through to the MAC address tiebreak, where the switch with the numerically lowest MAC address wins the election. Comparing the three addresses shown --
00:1a:2b:3c:4d:01, 00:1a:2b:3c:4d:02, and
00:1a:2b:3c:4d:03 -- Switch A's address is the lowest, since only the final octet differs and 01 is less than both 02 and 03, making Switch A the elected root bridge. RSTP uses the identical Bridge ID comparison mechanism as legacy STP for root election, so there is no special 'median MAC address' rule that applies uniquely under RSTP, making that distractor factually invalid regardless of protocol version. The election process also does not require any manual bridge priority configuration to complete; the default priority value is entirely sufficient on its own to allow a deterministic election to occur, since default priorities are still numerically comparable Bridge IDs.


NEW QUESTION # 173
......

before making a choice, you can download a trial version of JN0-352 preparation materials. After you use it, you will have a more complete understanding of this JN0-352 exam questions. In this way, you can use our JN0-352 study materials in a way that suits your needs and professional opinions. We hope you will have a great experience with JN0-352 Preparation materials. At the same time, we also hope that you can realize your dreams with our help. We will be honored.

JN0-352 Books PDF: https://www.freedumps.top/JN0-352-real-exam.html