Exam Dumps JN0-351 Zip | Latest JN0-351 Exam Online

2026 Latest DumpsActual JN0-351 PDF Dumps and JN0-351 Exam Engine Free Share: https://drive.google.com/open?id=1NAxmZMuSdXFUeXfqAPW7fzE_mk1RvYYq

Our JN0-351 study materials are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. Pass rate is what we care for preparing for an examination, which is the final goal of our JN0-351 study materials. According to the feedback of our users, we have the pass rate of 99%, which is equal to 100% in some sense. The high quality of our products also embodies in its short-time learning. You are only supposed to practice JN0-351 Study Materials for about 20 to 30 hours before you are fully equipped to take part in the examination.

Juniper JN0-351 Exam Overview:

Certification Vendor:	Juniper Networks
Exam Name:	Enterprise Routing and Switching, Specialist (JNCIS-ENT)
Exam Number:	JN0-351
Exam Duration:	90 minutes
Exam Price:	USD varies by region (typically around $200–$300 USD)
Exam Format:	Single-answer multiple choice, Multiple-answer multiple choice, Multiple choice
Available Languages:	English
Related Certifications:	JNCIP-ENT JNCIE-ENT JNCIA-Junos
Passing Score:	~60-70%
Real Exam Qty:	65
Certificate Validity Period:	3 years
Recommended Training:	Juniper Enterprise Routing & Switching Training Juniper Learning Portal
Exam Registration:	Juniper Certification Registration Pearson VUE Juniper Exams
Sample Questions:	Juniper JN0-351 Sample Questions
Exam Way:	Pearson VUE proctored exam (online or test center)
Pre Condition:	JNCIA-Junos (JN0-105) recommended as prerequisite knowledge
Official Syllabus URL:	https://www.juniper.net/us/en/training/certification/certification-tracks/enterprise-routing-switching/jncis-ent.html

>> Exam Dumps JN0-351 Zip <<

Pass Guaranteed Quiz JN0-351 - Enterprise Routing and Switching, Specialist (JNCIS-ENT) Marvelous Exam Dumps Zip

Our JN0-351 guide torrent not only has the high quality and efficiency but also the perfect service system after sale. If you decide to buy our JN0-351 test torrent, we would like to offer you 24-hour online efficient service, and you will receive a reply, we are glad to answer your any question about our JN0-351 Guide Torrent. You have the right to communicate with us by online contacts or by an email. The high quality and the perfect service system after sale of our JN0-351 exam questions have been approbated by our local and international customers. So you can rest assured to buy.

Juniper JN0-351 Exam Syllabus Topics:

Topic	Details
Topic 1	Tunnels: The fundamentals of IP tunneling are emphasized, highlighting their requirements and functionalities. Mastery in configuring, monitoring, and troubleshooting tunnels equips professionals to meet the demands of the JN0-351 exam.
Topic 2	Layer 2 Security: This topic introduces Layer 2 protection mechanisms and firewall filters to fortify network security. Practical skills in configuring, monitoring, and troubleshooting these features prepare candidates to address exam objectives and real-world challenges effectively.
Topic 3	BGP: This topic focuses on the operational and conceptual elements of BGP, a cornerstone in enterprise networks.
Topic 4	Protocol Independent Routing: An essential domain for understanding routing components outside protocol dependencies, this topic enhances expertise in configuring, monitoring, and troubleshooting critical elements.
Topic 5	OSPF: The concepts and operational details of OSPF are explored, providing tools for routing efficiency. Configuration and troubleshooting mastery ensure readiness for both the exam and complex enterprise environments.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q98-Q103):

NEW QUESTION # 98
Which statement correctly describes the function of a Junos OS "generated route"?

A. It cannot be redistributed into other protocols.
B. It is a static route created manually with a single next hop.
C. It is a route dynamically created based on the existence of one or more contributing routes in the routing table, often used for route summarization.
D. It only applies to OSPF external routes.

Answer: C

Explanation:
A generated route in Junos OS is a type of aggregate-like route that becomes active in the routing table only when at least one contributing (more specific) route is present. Generated routes are commonly used for route summarization, allowing an administrator to advertise a summarized prefix only when the underlying specific routes actually exist.

NEW QUESTION # 99
What are two characteristics of RSTP alternate ports? (Choose two.)

A. RSTP alternate ports provide an alternate lower cost path to the root bridge.
B. RSTP alternate ports are active ports used to forward frames toward the root bridge.
C. RSTP alternate ports provide an alternate higher cost path to the root bridge.
D. RSTP alternate ports block traffic while receiving superior BPDUs from a neighboring switch.

Answer: C,D

Explanation:
A is correct because RSTP alternate ports block traffic while receiving superior BPDUs from a neighboring switch. An alternate port is a backup port for a root port, which means it receives better BPDUs from another bridge than the current root port1. However, an alternate port does not forward any traffic, as it is in a discarding state2. It only listens to BPDUs and waits for the root port to fail. If the root port fails, the alternate port can immediately transition to a forwarding state and become the new root port1.
C is correct because RSTP alternate ports provide an alternate higher cost path to the root bridge. An alternate port is selected based on the same criteria as the root port, which are the lowest bridge ID, the lowest path cost, the lowest sender port ID, and the lowest receiver port ID3. However, an alternate port receives a higher cost BPDU than the root port, otherwise it would be the root port itself1. Therefore, an alternate port provides an alternate higher cost path to the root bridge than the root port.

NEW QUESTION # 100
Click the Exhibit button.

Which statement concerning Bidirectional Forwarding Detection (BFD) is true for the configuration shown in the exhibit?

A. The effective interval for neighbor 172.30.1.2 is 500 ms.
B. The link 1o neighbor 192.168.100.2 is not using BFD.
C. The minimum-interval must match on both ends.
D. The effective interval for neighbor 192.168.100.2 is 500 ms.

Answer: C

NEW QUESTION # 101
You are asked to create a new firewall filter to evaluate Layer 3 traffic that is being sent between VLANs. In this scenario, which two statements are correct? (Choose two.)

A. You should apply the firewall filter to the appropriate VLAN.
B. You should create a family Ethernet-switching firewall filter with the appropriate match criteria and actions.
C. You should create a family inet firewall filter with the appropriate match criteria and actions.
D. You should apply the firewall filter to the appropriate IRB interface.

Answer: C,D

Explanation:
A firewall filter is a configuration that defines the rules that determine whether to forward or discard packets at specific processing points in the packet flow. A firewall filter can also modify the attributes of the packets, such as priority, marking, or logging. A firewall filter can be applied to various interfaces, protocols, or routing instances on a Juniper device 1 .
A firewall filter has a family attribute, which specifies the type of traffic that the filter can evaluate. The family attribute can be one of the following: inet, inet6, mpls, vpls, iso, or ethernet-switching 2 . The family inet firewall filter is used to evaluate IPv4 traffic, which is the most common type of Layer 3 traffic on a network.
To create a family inet firewall filter, you need to specify the appropriate match criteria and actions for each term in the filter. The match criteria can include various fields in the IPv4 header, such as source address, destination address, protocol, port number, or DSCP value. The actions can include accept, discard, reject, count, log, policer, or next term 3 .
To apply a firewall filter to Layer 3 traffic that is being sent between VLANs, you need to apply the filter to the appropriate IRB interface. An IRB interface is an integrated routing and bridging interface that provides Layer 3 functionality for a VLAN on a Juniper device. An IRB interface has an IP address that acts as the default gateway for the hosts in the VLAN. An IRB interface can also participate in routing protocols and forward packets to other VLANs or networks 4 .
Therefore, option C is correct, because you should create a family inet firewall filter with the appropriate match criteria and actions. Option D is correct, because you should apply the firewall filter to the appropriate IRB interface.
Option A is incorrect, because you should not create a family ethernet-switching firewall filter with the appropriate match criteria and actions. A family ethernet-switching firewall filter is used to evaluate Layer 2 traffic on a Juniper device. A family ethernet-switching firewall filter can only match on MAC addresses or VLAN IDs, not on IP addresses or protocols 5 .
Option B is incorrect, because you should not apply the firewall filter to the appropriate VLAN. A VLAN is a logical grouping of hosts that share the same broadcast domain on a Layer 2 network. A VLAN does not have an IP address or routing capability. A firewall filter cannot be applied directly to a VLAN; it must be applied to an interface that belongs to or connects to the VLAN 6 .
References:
1 : Firewall Filters Overview 2 : Configuring Firewall Filters 3 : Configuring Firewall Filter Match Conditions and Actions 4 : Understanding Integrated Routing and Bridging Interfaces 5 : Configuring Ethernet-Switching Firewall Filters 6 : Understanding VLANs
https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/task/firewall-filter-qfx- series-cli.html

NEW QUESTION # 102
You are receiving multiple BGP routes from an upstream neighbor and only want to advertise a single summarized prefix to your internal OSPF neighbors. This route should only be advertised when you are receiving these BGP routes from this neighbor.
In this scenario, which type of route should you create?

A. aggregate route
B. static route using qualified next hops
C. generate route
D. static route using the resolve feature

Answer: C

Explanation:
Both aggregate and generated routes would work, but the best choice is generated routes.
One key difference:
With aggregated routes any prefix in the routing table counts as a contributing route.
With generated routes only prefix with a valid next-hop qualifies.

NEW QUESTION # 103
......

Latest JN0-351 Exam Online: https://www.dumpsactual.com/JN0-351-actualtests-dumps.html

BTW, DOWNLOAD part of DumpsActual JN0-351 dumps from Cloud Storage: https://drive.google.com/open?id=1NAxmZMuSdXFUeXfqAPW7fzE_mk1RvYYq