300-425 Guaranteed Success - 300-425 Valid Exam Book

What's more, part of that DumpsActual 300-425 dumps now are free: https://drive.google.com/open?id=161o5f0DdecWJaMiY2BK_up6oYSPhdIxh

Do you have registered for the Cisco 300-425 exam and are worried about Cisco 300-425 exam preparation? Try Cisco 300-425 PDF Questions and practice tests which help you prepare the whole course in less duration. The Cisco 300-425 practice test material gives you a clear idea to prepare for the Cisco 300-425 Exam and saves you preparation time. An 300-425 exam is a time-based exam, and the candidate must be fast enough to solve the problems in a limited time.

Cisco 300-425 Exam Syllabus Topics:

SectionWeightObjectives
Mobility25%- Design mobility groups based on roles
- Optimize client roaming
- Validate mobility tunneling
  • 1. Data path
  • 2. Control path
WLAN High Availability20%- Design high availability for controllers
  • 1. Anchor controller redundancy
  • 2. Stateful Switchover
  • 3. Link Aggregation Group
- Design high availability for access points
  • 1. Fallback configuration
  • 2. Access point prioritization
Wireless Site Survey25%- Describe material attenuation and wireless impact
- Utilize planning and analysis tools
  • 1. Prime Infrastructure
  • 2. Chanalyzer
  • 3. AirMagnet
  • 4. Spectrum Analyzer
  • 5. Ekahau
- Perform pre-deployment site survey
- Perform post-deployment site survey
- Perform and analyze Layer 1 site survey
- Collect design requirements and evaluate constraints
  • 1. Security
  • 2. Deployment type
  • 3. Real-time applications
  • 4. Access point type
  • 5. Client density
- Perform predictive site survey
Wired and Wireless Infrastructure30%- Design radio management
  • 1. RRM
  • 2. RxSOP
  • 3. RF profiles
- Design high-density wireless networks
  • 1. Lecture halls
  • 2. Campus
  • 3. Conference rooms
- Apply wireless network design requirements
  • 1. Hyperlocation
  • 2. Data
  • 3. Voice and video
  • 4. Location services
- Determine physical infrastructure requirements
  • 1. Mounting
  • 2. Cabling
  • 3. Access point power
  • 4. Grounding
  • 5. Switch port capacity
- Design wireless bridging
  • 1. Workgroup bridge and roaming
  • 2. Modes of operation
  • 3. Ethernet bridging
- Determine logical infrastructure requirements
  • 1. WLC licensing
  • 2. Wireless architecture selection

>> 300-425 Guaranteed Success <<

300-425 Valid Exam Book - Exam 300-425 Vce

Only to find ways to success, do not make excuses for failure. To pass the Cisco 300-425 Exam, in fact, is not so difficult, the key is what method you use. DumpsActual's Cisco 300-425 exam training materials is a good choice. It will help us to pass the exam successfully. This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have.

Cisco Designing Cisco Enterprise Wireless Networks Sample Questions (Q135-Q140):

NEW QUESTION # 135
A network engineer is preparing for an office site survey with a height of 2.5 meters.
Which three components are recommended to complete the survey? (Choose three.)

Answer: C,D,F

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/84/b_mesh_84/Site_Preparatio n_and_Planning.html#ID3405


NEW QUESTION # 136
An AP is receiving 802.11 packets on its 802.11a radio with an RSSI value of -77 dBm. The current AP is part of an AP group that has been assigned an RF profile with RX-SOP set to Medium for 802.11A. Which action does the AP take with the packets?

Answer: C

Explanation:
The 5Ghz radio will decode the packet just fine because the rxop is set to medium (which drop packets with a rssi of -76. Packets arrive with -78 dBm will be dropt -77 not.


NEW QUESTION # 137
A wireless engineer is using Ekahau site survey to validate that an existing wireless network is operating as expected, which type of survey should be using to identify the end-to-end network performance?

Answer: D

Explanation:
An active ping survey is used to validate network performance by sending and receiving data packets to measure the end-to-end network performance, including latency, packet loss, and throughput. Ekahau site survey tools can perform active ping surveys to test the connectivity and performance of the wireless network, ensuring that it operates as expected and meets the required service levels.
References := Configuring Active Surveys - Ekahau Customer Support


NEW QUESTION # 138
What are the three RSTP port states? (Choose three.)

Answer: B,D,E

Explanation:
Rapid Spanning Tree Protocol (RSTP) uses only three port states: discarding, learning, and forwarding. The learning and forwarding states are the same as the original STP standard, but the discarding state performs the functions originally performed in the disabled, blocking, and listening STP states.
With STP, you can safely assume that a listening port is either designated or root, and is on its way to the forwarding state. Unfortunately, once a port is in the forwarding state, there is no way to tell whether the port is root or designated. There is no difference in the operation of a port in blocking state and a port in listening state, since they both discard frames and do not learn MAC addresses. The real difference is in the role the spanning tree assigns to the port. RSTP decouples the role and the state of a port.
With RSTP, a role is assigned to a port. The root port and designated port roles are the same as with STP, while the blocking port role is split into the backup and alternative port roles. The Spanning Tree Algorithm (STA) determines the role of a port based on Bridge Protocol Data Units (BPDUs). The RSTP roles can be defined as follows:
Root port: The port receiving the best BPDU on a bridge (lowest-cost path to the root bridge) is the root port.
Designated port: The port that has the best path to the root bridge on a given segment is the designated port.
The bridges connected to a given segment listen to each other's BPDUs and agree on the bridge sending the best BPDU as the designated bridge for the segment. The corresponding port on that bridge is the designated port.
Alternative port: An alternative port is a port blocked by receiving more useful BPDUs from another bridge. It becomes the root port if the active port fails.
Backup port: A backup port is a port blocked by receiving more useful BPDUs originating from the same bridge. It becomes the designated port if the existing designated port fails.
Ports on the switch can also be classified as edge ports and non-edge ports. Access ports or edge ports are those that attach to devices such as workstations or printers. Non-edge ports are those that connect to other switches. If a non-edge port transitions to a forwarding state, a TC BPDU will be generated. On the other hand, when an edge ports transitions to the forwarding state, such as after a computer boots up or a device is connected to the port, no TC BPDU is generated.
Objective:
Layer 2 Technologies
Sub-Objective:
Configure and verify spanning tree
References:
Cisco > Support > Technology Support > LAN Switching > Spanning Tree Protocol > Technology Information > Technology White Paper > Understanding Rapid Spanning Tree Protocol (802.1w)


NEW QUESTION # 139
A customer has this wireless design:
- two Cisco Catalyst 9800 Series wireless controllers that are
configured in a high-availability SSO cluster to manage the APs in a
local office network
- 100 APs in local mode that are registered to the high-availability
cluster
- one Catalyst 9800 Series wireless controller that is deployed as an
anchor in a DMZ
- a CAPWAP tunnel in UP state between the high-availability cluster and the anchor WLC The customer wants the anchored traffic to remain up if a single WLC in the high-availability cluster fails. How must this requirement be incorporated into the design?

Answer: B


NEW QUESTION # 140
......

Overall we can say that Designing Cisco Enterprise Wireless Networks; 300-425 certification can provide you with several benefits that can assist you to advance your career and achieve your professional goals. Are you ready to gain all these personal and professional benefits? Looking for a sample, is smart and quick for Cisco 300-425 Exam Dumps preparation? If your answer is yes then you do not need to go anywhere, just download DumpsActual 300-425 Questions and start Cisco 300-425 exam preparation with complete peace of mind and satisfaction.

300-425 Valid Exam Book: https://www.dumpsactual.com/300-425-actualtests-dumps.html

2026 Latest DumpsActual 300-425 PDF Dumps and 300-425 Exam Engine Free Share: https://drive.google.com/open?id=161o5f0DdecWJaMiY2BK_up6oYSPhdIxh