여러분은 먼저 우리 DumpTOP사이트에서 제공되는Fortinet인증NSEI_OTS_AR-7.6시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. DumpTOP는 여러분이 한번에Fortinet인증NSEI_OTS_AR-7.6시험을 패스하도록 하겠습니다. 만약Fortinet인증NSEI_OTS_AR-7.6시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Access Control | 25% | - Authentication and access policies for OT devices - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models |
| Topic 2: Monitoring and Risk Assessment | 25% | - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 |
| Topic 3: Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC |
| Topic 4: Network Security | 25% | - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems |
>> NSEI_OTS_AR-7.6시험패스 가능한 공부 <<
취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. Fortinet인증 NSEI_OTS_AR-7.6시험은 널리 인정받는 인기자격증의 시험과목입니다. Fortinet인증 NSEI_OTS_AR-7.6시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. DumpTOP의Fortinet인증 NSEI_OTS_AR-7.6덤프는 시험패스율이 높아Fortinet인증 NSEI_OTS_AR-7.6시험준비에 딱 좋은 공부자료입니다. DumpTOP에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.
질문 # 21
You want to improve the security of your OT network and therefore deploy a FortiGate device with the OT signatures database. Which two statements about this database are true? (Choose two answers)
정답:A,B
설명:
The correct answers are A and D .
Option A is correct because the study guide states that for OT protocol coverage, "a valid OT security service license is required to receive updates on both intrusion prevention and application control signatures." It also shows "Valid license required" in the FortiGuard subscriptions section for OT protocol coverage. This confirms that a valid OT security service license is required to use and maintain the OT signatures database correctly.
Option D is also correct because the guide explicitly shows the CLI configuration used "To enable OT signatures" :
config ips global
set exclude-signatures none
end
It then states that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI." This directly confirms that you must set exclude-signatures to none in the CLI to enable OT signatures.
Option B is incorrect because the study guide does not say you manually import the OT signatures database.
Instead, it explains that FortiGuard maintains updated OT signatures and that a valid license is required to receive updates. Option C is incorrect because the guide clearly says OT signatures are excluded by default until enabled from the CLI.
질문 # 22
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
정답:D
설명:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
질문 # 23
Refer to the exhibit.
An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)
정답:C
설명:
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .
질문 # 24
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
정답:D
설명:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
질문 # 25
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
정답:B
설명:
The correct answer is A. FortiGate queries FortiGuard servers . The study guide explains the device detection process very clearly: "First, FortiGate attempts to detect the devices based on the information in the local device database (CIDB). If FortiGate cannot detect the devices locally, it queries the FortiGuard servers by sending data about the unknown devices to the FortiGuard servers. In response, the FortiGuard servers provide additional information about those devices." This directly answers the question and shows that querying FortiGuard is the next step after local detection fails.
Option D is incorrect because the guide says FortiGate checks the local device database (CIDB) first, before this next step. Option B refers more to FortiNAC-style profiling logic, not FortiGate's OT device detection flow. Option C is also incorrect because service connectors are not described here as the immediate follow-up step for unknown local device detection. The study guide specifically identifies FortiGuard servers as the next destination for device identification assistance.
질문 # 26
......
DumpTOP에서 출시한 Fortinet NSEI_OTS_AR-7.6덤프만 있으면 학원다닐 필요없이 시험패스 가능합니다. Fortinet NSEI_OTS_AR-7.6덤프를 공부하여 시험에서 떨어지면 불합격성적표와 주문번호를 보내오시면 덤프비용을 환불해드립니다.구매전 데모를 받아 덤프문제를 체험해보세요. 데모도 pdf버전과 온라인버전으로 나뉘어져 있습니다.pdf버전과 온라인버전은 문제는 같은데 온라인버전은 pdf버전을 공부한후 실력테스트 가능한 프로그램입니다.
NSEI_OTS_AR-7.6최신 업데이트버전 덤프문제: https://www.dumptop.com/Fortinet/NSEI_OTS_AR-7.6-dump.html