P.S. Free & New VNX301 dumps are available on Google Drive shared by PracticeMaterial: https://drive.google.com/open?id=14ZYRtTmgl1BmRZ6Ga9_X9UCZpOHRkAU7
VNX301 certification exam opens the doors for starting a bright career. After passing the Versa Certified SD-WAN Specialist (VNX300) VNX301 test you will easily apply for well-paid jobs in top companies all over the world. VNX301 exam offers multiple advantages including, high salaries, promotions, enhancing resumes, and skills improvement. Once you pass the VNX301 Exam, you can avail all these benefits. If you want to pass the Versa Networks VNX301 certification exam, you must find the best resource to prepare for the VNX301 test.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Reliable VNX301 Test Testking <<
Are you very eager to pass the VNX301 exam? Then you must want to see this amazing learning product right away! After you decide to purchase our VNX301 guide questions, please pay immediately. If your page shows that the payment was successful, you will receive a link of our VNX301 Exam Materials we sent to you within five to ten minutes. And the pass rate of VNX301 study braindumps is high as 98% to 100%.
NEW QUESTION # 16
You are configuring the BGP routing protocol between a Versa Secure SD-WAN CPE with AS number
64514 and two upstream service providers: SP1 with AS number 64515 and SP2 with AS number 64519. You want to prefer BGP routes learned from AS 64515 over routes learned from AS 64519. Which BGP path attribute would be used to accomplish this task?
Answer: D
Explanation:
The correct answer is LOCAL_PREF . In BGP, the Local Preference attribute is used inside an autonomous system to influence which exit path is preferred for outbound traffic. In this scenario, the Versa Secure SD- WAN CPE receives routes from two upstream service providers, SP1 and SP2. To prefer routes learned from AS 64515 over routes learned from AS 64519, you would apply a BGP import or route policy that assigns a higher local preference to routes received from SP1. Versa SD-WAN design guidance shows this exact routing concept: an import policy can manipulate the Local-Pref attribute to prefer one advertised route path over another. The Versa output examples also display "Local Preference" as a BGP route attribute used in route selection.
MULTI_EXIT_DISC, or MED, is generally used to influence how a neighboring AS enters your AS, not how your CPE prefers routes learned from different upstreams. ORIGIN is part of BGP best-path selection but is not normally the administrative tool used to prefer one provider. NEXT_HOP identifies the next-hop address and does not directly define route preference.
NEW QUESTION # 17
A CGNAT rule is configured, but traffic is not being translated. You want to confirm whether the expected source and destination prefixes are programmed in the CGNAT access list for the tenant. Which command is most appropriate?
Answer: D
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation states that, after connecting to the vsmd daemon, administrators can view CGNAT access lists used for traffic matching with the command show cgnat acl info < tenant-id > . The sample output shows ACL handle, rule ID, category, precedence, VRF, source IP, destination IP, tenant ID, and total filters.
This is the correct command when NAT configuration appears present but translations do not occur, because it verifies whether the runtime dataplane has the correct traffic-match rules. If the source prefix, destination prefix, VRF, or precedence is wrong, the session may never match the NAT rule, and no translation will be applied.
show system status checks system services. show device clients shows active and failed sessions, CPU usage per session, and memory load for processes. show system storage shows disk usage. These commands are useful in other troubleshooting workflows, but they do not validate CGNAT ACL matching criteria for tenant traffic.
NEW QUESTION # 18
During onboarding, Versa Director shows the first branch-connect notification for a new CPE, but no later staged branch-connect notification appears. Which troubleshooting area should be investigated first?
Answer: C
Explanation:
The correct answer is B . Versa branch lifecycle notifications are generated at different stages of onboarding.
The first notification indicates that the branch connected using factory-default configuration. After that notification, Versa Director pushes the staging configuration to the branch and requests a reboot. After rebooting with staging configuration, the branch should connect again to the Controller, and a later branch- connect notification should appear.
If this later staged connection notification does not appear, Versa's troubleshooting guidance says to debug either the data path or IPsec connectivity from the branch to the Controller. This makes sense because the branch must have working transport reachability and IKE/IPsec establishment toward the Controller before it can continue the SD-WAN lifecycle.
Analytics disk usage, LDAP authentication, and URL filtering are not part of the branch staging control path. They may affect monitoring, user identity, or security inspection after the site is operational, but they do not explain why the branch stops after the initial factory-default onboarding notification.
NEW QUESTION # 19
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: C
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 20
You are troubleshooting a branch that cannot form SD-WAN overlay tunnels. The branch has WAN interfaces up, but you suspect remote endpoint objects were not learned. Which VSM command should you use to verify whether remote site objects were learned from BGP or from configuration?
Answer: D
Explanation:
The correct answer is A . Versa data-path troubleshooting documentation gives a specific VSM control-plane workflow for checking SD-WAN tunnel objects. After connecting to the VSM daemon, administrators can use show vsm p2mp local-tunnel-sites 0 to inspect local site objects. To check whether remote site objects were learned from BGP or from configuration , Versa instructs administrators to issue show vsm p2mp tunnel-remote-endpoint tenant < tenant-id > on the VSM control plane.
This command is highly relevant when local WAN interfaces are operational, but overlay tunnel formation is incomplete. It shows remote endpoints such as Controllers, hubs, or branches, along with site type, site name, branch ID, tenant ID, remote WAN link information, and tunnel state-related fields.
show interfaces brief confirms interface state and IP addresses, but it does not show learned remote SD- WAN endpoint objects. CGNAT summary is unrelated to tunnel endpoint learning. System storage is useful for disk checks, but not for SD-WAN overlay endpoint troubleshooting.
NEW QUESTION # 21
......
Of course, when we review a qualifying exam, we can't be closed-door. We should pay attention to the new policies and information related to the test VNX301 certification. For the convenience of the users, the VNX301 test materials will be updated on the homepage and timely update the information related to the qualification examination. Annual qualification examination, although content broadly may be the same, but as the policy of each year, the corresponding examination pattern grading standards and hot spots will be changed, as a result, the VNX301 Test Prep can help users to spend the least time, you can know the test information directly what you care about on the learning platform that provided by us, let users save time and used their time in learning the new hot spot concerning about the knowledge content.
VNX301 Exam Topic: https://www.practicematerial.com/VNX301-exam-materials.html
P.S. Free & New VNX301 dumps are available on Google Drive shared by PracticeMaterial: https://drive.google.com/open?id=14ZYRtTmgl1BmRZ6Ga9_X9UCZpOHRkAU7