ExamDiscuss provides Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) practice tests (desktop and web-based) to its valuable customers so they get the awareness of the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) certification exam format. Likewise, Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam preparation materials for Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam can be downloaded instantly after you make your purchase.
| Section | Objectives |
|---|---|
| Topic 1: SD-WAN | - SD-WAN architecture - Performance SLA - Overlay VPN - Application steering - Deployment and troubleshooting - SD-WAN routing |
| Topic 2: Enterprise Firewall | - Security Fabric integration - High availability - Centralized management and analytics - Routing and advanced networking - VPN technologies - Authentication and identity - Troubleshooting - Advanced firewall deployment |
>> New Fortinet NSE7_FSN_AR-7.6 Practice Questions <<
The NSE7_FSN_AR-7.6 authorized training exams provided by ExamDiscuss helps you to clear about your strengths and weaknesses before you take the exam. You can get exam scores after each practice test with NSE7_FSN_AR-7.6 test engine, which allow you to self-check your knowledge of the key topical concepts. The frequently updated of NSE7_FSN_AR-7.6 Latest Torrent can ensure you get the newest and latest study material. You will build confidence to make your actual test a little bit easier with NSE7_FSN_AR-7.6 practice vce.
NEW QUESTION # 54
In the SAML negotiation process, which section does the Identity Provider (IdP) provide the SAML attributes utilized in the authentication process to the Service Provider (SP)?
Answer: C
Explanation:
The correct answer is D. Assertion dump .
The study guide states that: "SAML attributes are pieces of information about a user that are exchanged between IdPs and SPs during the SAML authentication process. These attributes are included in the SAML assertion, which is built by the IdP as part of the authentication process." It also shows the real-time SAML debug output under " ** Assertion Dump ****"**, where the SAML attributes appear inside the assertion, such as:
* < saml:Attribute Name= " username " >
* < saml:Attribute Name= " groups " >
The same study-guide page explicitly labels this area as "Attributes sent by IdP" So, although the IdP sends an authentication response overall, the actual section that contains the SAML attributes is the Assertion dump
NEW QUESTION # 55
Refer to the exhibit.
The exhibit shows a session entry. Which statement about this TCP session is true?
Answer: A
Explanation:
The correct answer is C. The session is offloaded using NPU.
The exact session example in the study guide shows:
proto=6 # this is a TCP session
expire=3599 # the session will expire in 3599 seconds, not in one second hook=post dir=org act=snat 10.9.31.117:45388- > 200.8.57.5:443(10.1.0.3:45388) hook=pre dir=reply act=dnat 200.8.57.5:443- > 10.1.0.3:45388(10.9.31.117:45388) npu info: ... offload=8/8 ...
and the slide explicitly states: "Offloaded in both directions using NP6" The study guide also explains this exact point clearly:
"Counters for hardware acceleration-The presence of the npu info field indicates the session has been offloaded to hardware acceleration. In this example, traffic is being offloaded in both directions using network processor (NP) 6, which is represented by the value of 8." Why the other options are wrong:
A is wrong because expire=3599, not 1. The duration=1 field means the session has existed for 1 second, not that it will expire in 1 second.
B is wrong because the original session is from 10.9.31.117 to the remote server 200.8.57.5:443. The IP
10.1.0.3 is the SNAT-translated source address, not the final destination.
D is not the best answer for this single-select question. The reply is indeed DNATed back toward the original client, but the exact validated takeaway highlighted by the study guide for this exhibit is the NPU offload state.
NEW QUESTION # 56
Refer to the exhibit, which shows the partial output of a diagnose command.
Which two conclusions can you draw from the output shown in the exhibit? (Choose two.)
Answer: A,B
Explanation:
The study guide identifies this exact output as an expectation session created by the FTP session helper:
"run helper-ftp" indicates the FTP helper is in use.
"FortiGate created an expectation session and opened the pinhole port for the expected return traffic" It also explains why this exists:
"Another important function of the session helper is to temporarily create an expected session (or pinhole) for the data channel connection that comes from the server."
"The session helper automatically creates the session and opens the door for the incoming connection."
"These incoming TCP sessions use random TCP port numbers."
That directly proves C is correct.
For A, the exhibit shows expire=23. The study guide explains the expire field as the length of time until the session expires if no matching traffic arrives, and the FortiOS guide states for expectation sessions:
"Expectation sessions usually have a timeout value of 30 seconds. If the communication from the server is not initiated within 30 seconds the expectation session times out and traffic will be denied." So with expire=23, FortiGate will allow that expected traffic only for the remaining 23 seconds; after that, it times out and the traffic is denied. That makes A correct.
Why the other options are wrong:
B is not supported. The study guide describes expectation sessions as being created by the session helper from the control-session negotiation, not as independent objects unaffected by the master session.
D is wrong as stated. Even though the output contains policy_id=25, the study guide explicitly says the incoming expected connection is allowed by the expected session itself, "even when no firewall policy allows it."
NEW QUESTION # 57
Refer to the exhibit.
The health-check configuration on a FortiGate device used as a spoke is shown.
You notice that the hub FortiGate does not prioritize the traffic as expected.
Which two configuration elements should you check on the hub? (Choose two.)
Answer: C,D
Explanation:
Comprehensive and Detailed 100 to 150 words of Explanation From Secure Networking Architect Study Guides topics:
The spoke configuration enables embed-measured-health, which causes SD-WAN SLA status to be embedded in ICMP probes sent toward the hub. For the hub to use this information correctly, Fortinet requires a remote- mode health check and appropriate IKE-route priorities.
The SD-WAN 7.6 Enterprise Administrator Study Guide states that the hub must define priority-in-sla and priority-out-sla, so B is correct. It also explicitly requires the same link-cost factor and metric on the spoke and hub when remote detection is used. In this exhibit, the spoke evaluates latency with a threshold of 100, making the matching SLA criteria on the hub essential and A correct. The hub does not need identical member identifiers because its local SD-WAN members are independently defined. set embedded-measure accept is not the required FortiOS hub configuration for receiving embedded SLA information.
NEW QUESTION # 58
Refer to the exhibits,
which show the configuration on FortiGate and partial session information for internet traffic from a user on the internal network. If the priority on route ID 2 were changed from 10 to 0, what would happen to traffic matching that user session? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. This behavior is dictated by the configuration command set snat-route-change enable shown in Exhibit 1 under config system global.
Routing Change: By changing the priority of route ID 2 from 10 to 0, it becomes lower than route ID 1 (priority 5). In FortiOS, a lower priority value indicates a more preferred route. Consequently, the active route for the destination changes from port1 to port2.
SNAT Implication: The existing session (shown in Exhibit 2) is using Source NAT (SNAT) with the IP address associated with port1 (10.200.1.1). If the traffic were simply switched to port2, the source IP would be incorrect for that interface and the return traffic would likely fail or be dropped.
snat-route-change enable: This specific setting instructs the FortiGate on how to handle established SNAT sessions when a routing change occurs that alters the preferred outgoing interface. When enabled, if a route change forces an SNAT session to a new interface, FortiGate flushes (deletes) the session from the session table. This is necessary because a live TCP session cannot survive a change in its source IP address. The client must initiate a new session, which will then be created using the new correct route (port2) and the corresponding new SNAT IP.
If this setting were disabled, the session would likely remain " sticky " to the original interface (port1) until it closed, provided the route still existed. However, the explicit configuration forces the deletion.
NEW QUESTION # 59
......
The Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) certification is one of the hottest career advancement credentials in the modern Fortinet world. The Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) certification can help you to demonstrate your expertise and knowledge level. With only one badge of Fortinet NSE 7 - Secure Networking 7.6 Architect in NSE7_FSN_AR-7.6 Certification, successful candidates can advance their careers and increase their earning potential.
NSE7_FSN_AR-7.6 Exam Material: https://www.examdiscuss.com/Fortinet/exam/NSE7_FSN_AR-7.6/