H19-404_V1.0 Reliable Guide Files, Flexible H19-404_V1.0 Learning Mode

Once you use our H19-404_V1.0 exam materials, you don't have to worry about consuming too much time, because high efficiency is our great advantage. You only need to spend 20 to 30 hours on practicing and consolidating of our H19-404_V1.0 learning material, you will have a good result. After years of development practice, our H19-404_V1.0 test torrent is absolutely the best. You will embrace a better future if you choose our H19-404_V1.0 exam materials.

Huawei H19-404_V1.0 Exam Syllabus Topics:

SectionObjectives
Campus Network Fundamentals- Typical campus network deployment models
- Enterprise campus network architecture principles
Presales Solution Design- Solution proposal and design methodology
- Customer requirement analysis
Switching and Routing in Campus Networks- Layer 2 and Layer 3 design principles
- VLAN and segmentation design
Huawei Campus Network Solutions- iMaster NCE-Campus management platform
- CloudCampus solution architecture
WLAN Planning and Design- Capacity and performance design considerations
- Wireless coverage planning
Network Security Design- Campus security architecture considerations
- Access control strategies

>> H19-404_V1.0 Reliable Guide Files <<

Flexible Huawei H19-404_V1.0 Learning Mode | H19-404_V1.0 New Study Guide

If you want to buy Huawei H19-404_V1.0 exam information, BraindumpsVCE will provide the best service and the best quality products. Our exam questions have been authorized by the manufacturers and third-party. And has a large number of IT industry professionals and technology experts, based on customer demand, according to the the outline developed a range of products to meet customer needs. Huawei H19-404_V1.0 Exam Certification with the highest standards of professional and technical information, as the knowledge of experts and scholars to study and research purposes. All of the products we provide have a part of the free trial before you buy to ensure that you fit with this set of data.

Huawei HCSE-Presales-Campus Network Planning and Design V1.0 Sample Questions (Q53-Q58):

NEW QUESTION # 53
Which of the following are common terminal identification methods?

Answer: A,B,C,D

Explanation:
All four options are recognized terminal identification methods. MAC OUI examines the first three bytes of a device's MAC address to determine its manufacturer, although it generally cannot identify the exact model or operating system. DHCP option identification analyzes fields such as DHCP options 12, 55, and 60, which can reveal the hostname, parameter-request list, vendor class, and other terminal characteristics. SNMP query is an active identification method that retrieves device details from relevant MIB objects and is particularly useful for printers, network devices, and other SNMP-capable equipment.
Nmap is also an active scanning method. It analyzes open ports, service responses, protocol behavior, and operating-system fingerprints to estimate a terminal's device type and OS. Huawei distinguishes information- reporting methods from proactive scanning methods: MAC OUI and DHCP options generally use information observed in traffic, whereas SNMP and Nmap actively query or scan the endpoint. iMaster NCE-Campus can correlate multiple fingerprints to improve identification accuracy and automatically apply terminal-specific access policies.


NEW QUESTION # 54
On a campus fabric network, which of the following methods can be used for non-authenticated terminals to access a VN?

Answer: D

Explanation:
Non-authenticated terminals can access a virtual network by using statically configured VLANs. Such terminals may include printers, cameras, sensors, industrial devices, and other dumb terminals that cannot perform 802.1X, Portal, or comparable interactive authentication. Their access interfaces and service VLANs are therefore configured in advance and mapped to the required VN.
Dynamic VLAN authorization requires a completed authentication or identification process. Normally, an authentication server returns a VLAN or other authorization attribute after validating the user or terminal.
Because the question specifically refers to non-authenticated terminals, dynamically authorizing a VLAN is not the applicable mechanism. The wired-mode and wireless-mode authorization options are likewise associated with authentication-based policy delivery rather than unconditional VN access.
Huawei's VN design guidance states that LAN-side physical interfaces and VLANs are assigned to the appropriate departments or services and then associated with corresponding VRFs or VNs. It also explains that a department may use an independent physical interface or share an interface while maintaining isolation through VLANs. Therefore, configuring a static VLAN is the correct method.


NEW QUESTION # 55
Which of the following statements are true about traffic encryption on SD-WAN links?

Answer: A,C

Explanation:
Huawei SD-WAN allows encryption to be controlled by virtual network and by specific device relationships.
When encryption is enabled for a VN, the overlay data channels carrying that VN's traffic use IPsec protection across the relevant WAN links. This provides consistent isolation and confidentiality for the department or service represented by that VN.
Encryption can also be enabled between selected devices or sites. In that case, secure data channels are established for traffic exchanged between those specified endpoints, while other device relationships can continue using GRE without IPsec according to their policies.
Application-specific encryption, as described in option C, is not the supported control granularity. Application identification can influence intelligent traffic steering, QoS, and security-policy selection, but it does not mean that only the payload of a selected application is independently encrypted inside an otherwise unencrypted SD-WAN tunnel.
A transport network is an underlay WAN such as MPLS or the Internet. Enabling encryption is an overlay tunnel policy rather than a mechanism that encrypts all traffic belonging to an entire TN. Huawei distinguishes TNs as underlay networks and GRE or IPsec VPNs as overlay data channels. Therefore, only A and B are correct.


NEW QUESTION # 56
iMaster NCE-Campus can identify terminals. Which of the following services can be provided after terminal identification?

Answer: A,C,D

Explanation:
After identifying a terminal, iMaster NCE-Campus can use the identification result for security monitoring, visibility, and policy automation. Spoofing detection is supported because the platform can compare a terminal's current type and traffic behavior with its previously identified characteristics. For example, if a device originally identified as an IP phone suddenly behaves like a PC, the system can generate a spoofing alarm or apply an isolation policy.
Terminal identification also supports statistics and reporting by vendor, operating system, device category, access port, and policy status. Huawei explicitly describes terminal-type statistics, report export, and visibility of access policies.
In addition, iMaster NCE-Campus can automatically deliver VLAN, security-group, QoS, authentication, and access-permission policies according to the identified terminal type. Option B is incorrect because wired authentication is an admission process, not a service produced after terminal identification. Therefore, A, C, and D are correct.


NEW QUESTION # 57
Which of the following statements are true about predefined security zones on a firewall?

Answer: B,C,D

Explanation:
Huawei firewalls provide four commonly predefined security zones: Local, Trust, DMZ, and Untrust. The Local zone represents the firewall itself, including traffic generated by or destined for the device, and has the highest default security priority of 100. The Trust zone normally represents an organization's protected internal network and has a default priority of 85, not 95. Therefore, option C is false.
The DMZ typically hosts public-facing or semi-trusted resources, such as web, email, and application servers.
Its default priority is 50, placing it between the trusted internal network and the external untrusted network.
The Untrust zone normally represents the Internet or another uncontrolled network and has the lowest predefined priority of 5.
Zone priority expresses the relative security level used to classify inbound and outbound traffic direction; it does not independently permit traffic. Security policies still determine whether matched traffic is allowed or denied. Huawei's SD-WAN design uses Trust and Untrust zones on CPEs, and iMaster NCE can orchestrate the corresponding zones and firewall policies for Internet-access protection.


NEW QUESTION # 58
......

The pass rate for H19-404_V1.0 study guide materials is 99%, and if you choose us, we can ensure you that you will pass the exam successfully. You can also enjoy free update for one year if you buy H19-404_V1.0 study materials from us, and the update version will be sent to your email automatically, therefore in the following year, you can get the free update version without spending money. Besides, our technicians will check the website constantly to ensure you have a good online shopping environment while buying H19-404_V1.0 Exam Dumps from us.

Flexible H19-404_V1.0 Learning Mode: https://www.braindumpsvce.com/H19-404_V1.0_exam-dumps-torrent.html