2026 Latest PDFDumps NCP-DB PDF Dumps and NCP-DB Exam Engine Free Share: https://drive.google.com/open?id=12FaZU8N6S3L1jyJzyZyueXsAr-bGa_I0
We have harmonious cooperation with exam candidates. The relation comes from the excellence of our NCP-DB training materials. We never avoid our responsibility of offering help for exam candidates like you, so choosing our NCP-DB practice dumps means you choose success. Moreover, without the needs of waiting, you can download the NCP-DB Study Guide after paying for it immediately. And we have patient and enthusiastic staff offering help on our NCP-DB learning prep.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
May be you doubt the ability of our Nutanix test dump; you can download the trial of our practice questions. All NCP-DB exam prep created by our experienced IT workers who are specialized in the certification study guide. We checked the updating of NCP-DB vce braindumps to make sure the preparation successful.
NEW QUESTION # 309
An administrator begins an SQL database clone deletion, but notices it fails almost immediately.
What could be the cause of this failure?
Answer: B
Explanation:
If an SQL database clone deletion fails immediately in NDB, the most likely cause is that the clone has been marked as Immutable. An immutable clone is protected from deletion to prevent accidental data loss, often set for critical development or testing environments. This protection must be explicitly removed by the administrator (e.g., via the NDB GUI or CLI) before the deletion can proceed.
* Option A (A refresh operation is in progress) is incorrect because a refresh operation would delay but not immediately fail the deletion.
* Option B (The clone has been marked as Immutable) is correct as immutability blocks deletion until changed.
* Option C (The database was not marked as Offline before the operation) is incorrect because the offline state is not a prerequisite for clone deletion.
* Option D (The database data drives are shared with other applications) is incorrect because shared drives might cause issues, but immutability is a more direct cause of immediate failure.
References
* Nutanix Database Service (NDB) User Guide, Chapter 5: Configuring Time Machines, Section:
Managing Clones and Deletion
* Nutanix Support & Insights, Knowledge Base Article: "Troubleshooting Clone Deletion Failures in NDB"
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 5: Protect Databases Using Time Machine
NEW QUESTION # 310
Which NDB HA control plane VM is upgraded first during an NDB upgrade?
Answer: B
Explanation:
During an NDB upgrade, the upgrade process follows a specific order to maintain stability and HA. The Leader NDB API Server is upgraded first. This server coordinates API requests and ensures the control plane remains operational. Upgrading the leader first minimizes disruption, as subsequent components (e.g., other API servers, HAProxy) rely on its leadership role. Once the leader is upgraded, the remaining NDB HA control plane VMs (e.g., follower API servers, HAProxy) are updated in sequence.
Other options are incorrect:
* A. NDB Server: Refers to the main NDB instance, not upgraded first.
* C. Leader HAProxy: Upgraded after API servers to maintain load balancing.
* D. NDB Agent VMs: Upgraded last, as they are client-side components.
Thus, the verified answer is B, reflecting the upgrade sequence.
Official Nutanix Database Automation References
* Nutanix Database Management & Automation (NDMA) course, Module 2: Deploying and Configuring an NDB Solution, Lesson 2.4: Updating NDB.
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Knowledge Objectives, Section
2: Deploy and Configure an NDB Solution, Objective 2.3: Perform NDB Updates (applicable to v6.10).
* Nutanix NDB Administration Guide: "NDB Upgrade Process" section.
NEW QUESTION # 311
An administrator needs to deploy a cumulative update (CU) for SQL Server.
What steps would the administrator take to prepare this deployment with NDB?
Answer: C
Explanation:
The correct answer is C because it follows the recommended procedure for applying a CU to a SQL Server Software Profile in NDB. By applying the patch to the profile VM, the administrator ensures that the CU is compatible with the existing Software Profile settings and configuration. By creating a new Software Profile version, the administrator preserves the previous version of the Software Profile for rollback purposes and allows the new version to be tested and published. Option A is incorrect because it deletes the existing Software Profile, which may cause data loss and prevent rollback. Option B is incorrect because it does not apply the patch to the profile VM, which may result in errors or inconsistencies in the Software Profile. Option D is incorrect because it creates a new Software Profile instead of a new version, which may cause confusion and duplication.
References: The following sources provide more information about the Software Profile management and patching in NDB:
* Nutanix Database Management & Automation (NDMA) course, Module 5: Patching Databases Using NDB, Lesson 5.2: Creating and Modifying Software Profiles
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5, Knowledge Objectives, Section
4 - Operate and Maintain an NDB Environment
* Nutanix Database Service (NDB) User Guide, Chapter 5: Patching Databases Using NDB, Section 5.2:
Creating and Modifying Software Profiles
* Nutanix Database Service (NDB) User Guide, Chapter 5: Patching Databases Using NDB, Section 5.3:
Testing and Publishing Database Patches
NEW QUESTION # 312
An administrator is initially setting up Time Machine for a newly-provisioned database. What is the maximum number of snapshots per day that can be configured in the GUI?
Answer: D
Explanation:
When setting up a Time Machine for a newly-provisioned database in NDB, the GUI allows the administrator to configure the frequency of snapshots for data protection. The maximum number of snapshots per day that can be configured in the NDB GUI is 6. This limit ensures a balance between data granularity (for point-in- time recovery) and storage overhead, preventing excessive resource consumption. The administrator can schedule these snapshots at regular intervals (e.g., every 4 hours) within the Time Machine configuration wizard.
Other options are incorrect based on NDB's design:
* A. 4: This is below the maximum supported limit.
* C. 8: Exceeds the GUI-configurable maximum.
* D. 12: Far exceeds the limit, suggesting manual or unsupported customization.
Thus, the verified answer is B, aligning with NDB's snapshot scheduling constraints.
Official Nutanix Database Automation References
* Nutanix Database Management & Automation (NDMA) course, Module 5: Data Protection and Recovery, Lesson 5.1: Configuring Time Machine.
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Knowledge Objectives, Section
5: Protect Databases Using NDB, Objective 5.1: Configure Time Machine Settings (applicable to v6.
10).
* Nutanix NDB Administration Guide: "Time Machine Snapshot Scheduling" section.
NEW QUESTION # 313
For supported Linux based database VM's managed by NDB, how would an administrator keep software profiles updated for provisioning new database VMs?
Answer: D
Explanation:
For supported Linux-based database VMs managed by NDB, keeping software profiles updated for provisioning new database VMs requires a structured process. The administrator must first apply the necessary patches (e.g., OS updates and database engine patches) to an existing database VM for each supported database engine (e.g., PostgreSQL, Oracle). Then, a new software profile version must be created using the updated VM as the source. This new version captures the patched configuration and can be used to provision new VMs, ensuring they are deployed with the latest updates.
* Option A (Create a Maintenance window under the policy menu, then under Database VM, add the database VMs to that maintenance window and check both Database and Operating system updates) is incorrect because a Maintenance Window schedules updates for existing VMs, not for updating software profiles for new provisions.
* Option B (Apply patches to a database VM for each supported database engine, then create a new software profile version for each supported database VM for each one using the updated database VM as the source) is correct as it follows the standard NDB process for profile updates.
* Option C (Associate the newly provisioned database VMs with a maintenance window so they are kept updated) is incorrect because this applies to ongoing maintenance, not initial profile updates for provisioning.
* Option D (In the Administrator menu drop down, go the Maintenance tab and choose Download Upgrade) is incorrect because downloading upgrades is part of the patch process, not the profile creation step.
This method ensures new VMs are provisioned with the latest software configurations.
References
* Nutanix Database Service (NDB) User Guide, Chapter 4: Managing Software Profiles, Section:
Updating Software Profiles
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 4: Manage Database Software Profiles
NEW QUESTION # 314
......
Our website has focused on the study of NCP-DB vce braindumps for many years and created latest NCP-DB dumps pdf for all level of candiates. All questions and answers are tested and approved by our IT professionals who are specialized in the NCP-DB Pass Guide. You can completely trust the accuracy of our NCP-DB exam questions because we will full refund if you failed exam with our training materials.
Reliable NCP-DB Test Camp: https://www.pdfdumps.com/NCP-DB-valid-exam.html
BONUS!!! Download part of PDFDumps NCP-DB dumps for free: https://drive.google.com/open?id=12FaZU8N6S3L1jyJzyZyueXsAr-bGa_I0