BONUS!!! PassTIP FlashArray-Implementation-Specialist 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1w7-Z3J_kjpLuEraz3ZFCPUOXwhB43hrp
만약PassTIP선택여부에 대하여 망설이게 된다면 여러분은 우선 우리 PassTIP 사이트에서 제공하는Pure Storage FlashArray-Implementation-Specialist시험정보 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후PassTIP 에서 출시한Pure Storage FlashArray-Implementation-Specialist덤프에 신뢰감을 느끼게 될것입니다. PassTIP는 여러분이 안전하게Pure Storage FlashArray-Implementation-Specialist시험을 패스할 수 있는 최고의 선택입니다. PassTIP을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
| Section | Objectives |
|---|---|
| Installation and Initial Configuration | - System setup
|
| Data Protection and Availability | - Snapshot and protection strategies
|
| FlashArray Architecture and Core Concepts | - FlashArray hardware and architecture overview
|
| Monitoring, Performance, and Troubleshooting | - System monitoring
|
>> FlashArray-Implementation-Specialist시험준비 <<
IT업계에 종사하고 계신 분은Pure Storage FlashArray-Implementation-Specialist 시험을 패스하여 자격증을 취득하려고 검색하다 저희 블로그를 보게 되시고 저희 사이트까지 방문하게 될것입니다. 방문하는 순간 Pure Storage FlashArray-Implementation-Specialist시험에 대한 두려움이 사라질것입니다. 완벽한 구매후 서비스까지 겸비하고 있어 자격증을 취득하는데서의 믿음직스러운 동반자로 되어드릴게요.
질문 # 171
Which PCI cards must be validated on the Bill of Materials (BOM) to allow an Implementation Engineer to attach a DirectFlash Shelf to a FlashArray//XL130R5?
정답：B
설명：
When expanding a Pure Storage FlashArray//XL130 R5 with an external DirectFlash Shelf (DFS), the backend connection between the shelf controllers and the main chassis relies on massive 100GbE bandwidth via the NVMe-oF (RoCE) protocol. Validating the Bill of Materials (BOM) before an onsite installation is a critical preparatory step to ensure the correct internal hardware was shipped to support this connection.
According to the official Pure Storage hardware matrix, the supported PCIe expansion card required for //XL series shelf connectivity is the FA-XL-100G Ethernet/RoCE 2-Port CX6 . This card utilizes the modern Mellanox/Nvidia ConnectX-6 (CX6) chipset, which is explicitly engineered to provide the necessary 100GbE RDMA capabilities to maintain ultra-low latency, NVMe-level speeds across the external storage fabric.
Option B (the CONNECTX-5 card) is an older, End-of-Sale component generally associated with legacy deployments or specific frontend iSCSI requirements, not the modern //XL backend loop. Option C (a 200G CX7 card) is not the standard validated BOM component for a single DFS loop on an //XL130 R5.
Confirming the presence of the 100G CX6 card ensures the engineer has the exact hardware required to successfully cable the 100GbE backend ports.
질문 # 172
An Implementation Engineer is performing a capacity consolidation on an X50R2 that is 83% full. The starting config is X50R2-20/10-22/0. The end config is X50R2-91/0. What steps should the Implementation Engineer follow to complete the work?
정답：C
설명：
The correct consolidation process involves evacuating data from the existing chassis drives first, then installing the new larger 91TB data pack, and finally evacuating shelf 0 to complete the consolidation efficiently.
질문 # 173
Support requests a powercycle on a newly-installed FlashArray. What is the correct way to perform this action?
정답：C
설명：
To perform a "powercycle" or restart of the FlashArray system as typically requested by Support for diagnostic or initialization purposes, the correct and safe method is to run the purearray reboot command.
While the term "power cycle" often implies a physical interruption of power in general IT terminology, Pure Storage FlashArrays are designed as "Always-On" systems and do not have standard physical power buttons on the controllers for this purpose (Option A is incorrect as no such button exists for system-wide power cycling). Physically unplugging the power cables (Option B) constitutes a "hard" power cycle or "cold boot," which is generally reserved for specific hardware replacements or emergency procedures, not standard support requests on a healthy or newly installed system.
The purearray reboot command gracefully shuts down the Purity operating system services, flushes data from the volatile memory to the non-volatile storage, and restarts both controllers sequentially or simultaneously depending on the arguments. This ensures that the system returns to a clean state without the risk of data inconsistency or "dirty" shutdowns that physical cable removal might cause. In the context of a new installation or support troubleshooting, this software-driven restart is the standard procedure.
질문 # 174
For FlashArray//XL, which PCIe card slot is reserved for control upgrades?
정답：A
설명：
On the FlashArray//XL, PCIe Slot 5 is explicitly reserved for Non-Disruptive Upgrade (NDU) procedures and specific control plane functions.
The FlashArray//XL chassis (5U) features a redesigned controller layout with 9 PCIe slots per controller (numbered 0-8). While slots 0-3 and 6-8 are generally available for Host I/O (FC/iSCSI) or Backend Expansion (SAS/NVMe-oF), Slot 5 is kept open or populated with specific interconnect cards used during controller upgrades.
During a "Data-in-Place" upgrade (e.g., moving from an //X to an //XL or upgrading //XL generations), this slot facilitates the high-speed link required to cluster the old and new controllers or to transfer state information. Implementation Engineers must ensure this slot is not populated with standard customer I/O cards (like FC HBAs) during the initial configuration, as doing so would block the ability to perform future non-disruptive hardware upgrades.
질문 # 175
Which ports are used by default for replication on a FlashArray//XR4?
정답：C
설명：
When cabling and configuring the network topology for a Pure Storage FlashArray (including the //XR4 platform equipped with standard OCP mezzanine networking cards), the physical Ethernet ports are strictly mapped to default services by the Purity//FA operating system. Understanding these defaults prevents network collisions and ensures traffic is isolated appropriately.
The first two onboard ports, explicitly labeled eth0 and eth1, are always reserved for out-of-band Management traffic. These 1GbE ports handle GUI access, SSH, API calls, and outbound Pure1 telemetry.
To support heavy data mobility workloads without impacting administrative access, Purity defaults the next sequential pair of high-speed ports- eth2 and eth3 -to Replication services. These 10GbE, 25GbE, or
100GbE ports are meant to be cabled directly to the customer's redundant WAN links or replication switches.
They carry all asynchronous snapshot transfers, continuous ActiveDR replication, and synchronous ActiveCluster traffic between arrays. While an Implementation Engineer can manually reassign these services using the purenetwork CLI suite if the customer requires a custom topology, utilizing eth2 and eth3 as the default replication interfaces remains the universally documented Pure Storage best practice for baseline installations. Ensuring these specific ports are properly patched into the designated replication VLANs prior to running the initialization scripts guarantees a smooth, error-free setup process.
질문 # 176
......
다른 사이트에서도Pure Storage FlashArray-Implementation-Specialist인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 PassTIP의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론PassTIP을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한PassTIP를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.
FlashArray-Implementation-Specialist인기자격증 시험덤프: https://www.passtip.net/FlashArray-Implementation-Specialist-pass-exam.html
그리고 PassTIP FlashArray-Implementation-Specialist 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1w7-Z3J_kjpLuEraz3ZFCPUOXwhB43hrp