P.S. JPTestKingがGoogle Driveで共有している無料かつ新しいEDGE-Expertダンプ：https://drive.google.com/open?id=1722xeS2odl2YGHrHQkG2ce1gp_UI2Bgm
全てのIT職員はEDGEのEDGE-Expert試験をよく知っています。これは一般的に認められている最高級の認証で、あなたのキャリアにヘルプを与えられます。あなたはその認証を持っているのですか。EDGEのEDGE-Expert試験は非常に難しい試験ですが、JPTestKingのEDGEのEDGE-Expert試験トレーニング資料を手に入れたら大丈夫です。試験が難しいと感じるのは良い方法を選択しないからです。JPTestKingを選んだら、成功の手を握ることがきるようになります。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Software & Methodology | 25% | - Baseline & Proposed Building Models
|
| Topic 2: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 3: EDGE System Overview | 15% | - EDGE Certification Process
|
| Topic 4: Energy Efficiency | 25% | - HVAC Systems
|
| Topic 5: Water Efficiency & Materials | 25% | - Water Demand
|
EDGE完璧な素材の選択については、品質、価格、アフターサービスなどに反映される場合があります。 EDGE-Expert試験シミュレーションは、JPTestKing試験のシラバスに厳密に基づいた試験に関する知識の蓄積です。 情報や試験へのアクセスをユーザーに提供し、教室のように参加したときに模擬的なテスト環境を提供します。 また、EDGE-Expert学習ガイドの内容は、日常生活での実践に適した専門家によって選択されます。 EDGE-Expert準備資料Excellence in Design for Greater Efficiencies (EDGE Expert) Examを渡すのに十分な時間がない忙しい労働者にとって特に有利です。
質問 # 35
To maintain their licensed status, what must EDGE Auditors do?
正解：B
解説：
EDGE Auditors must meet specific requirements to maintain their licensed status, ensuring they remain active and competent in their role. The EDGE Expert and Auditor Protocols provide detailed guidance: "To maintain their licensed status, EDGE Auditors must undertake at least one building project audit every two years. This requirement ensures that Auditors remain actively engaged in the certification process and maintain their practical experience in verifying EDGE projects" (EDGE Expert and Auditor Protocols, Section 5.1:
Maintaining Auditor Status). Option A, undertake at least one building project audit every two years, directly aligns with this requirement. Option B (attend refresher training for at least two hours every two years) and Option C (attend refresher training for at least two hours every three years) are incorrect, as the protocols specify a different training requirement: "EDGE Auditors must attend refresher training as required by IFC, typically every three years, but the duration is not specified as a minimum of two hours; the focus is on completing the training, not the exact hours" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). Option D (undertake at least one building project audit every three years) is also incorrect, as the required frequency is every two years, not three: "A three-year interval for audits does not meet the requirement of one audit every two years, which is necessary to ensure ongoing competence" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). The EDGE User Guide supports this by stating: "Auditors maintain their status by conducting at least one audit every two years, ensuring they stay familiar with EDGE standards and procedures through active practice" (EDGE User Guide, Section 6.5:
Working with EDGE Auditors). Additionally, the protocols note: "Failure to conduct an audit within two years may result in a lapse of Auditor status, requiring recertification through additional training or re- examination" (EDGE Expert and Auditor Protocols, Section 5.2: Recertification Conditions). Thus, undertaking at least one audit every two years (Option A) is the correct requirement for maintaining EDGE Auditor status.
Reference:EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status, Section5.2:
Recertification Conditions; EDGE User Guide Version 2.1, Section 6.5: Working with EDGE Auditors.
質問 # 36
The EDGE definition of a green building is a building that uses less resources quantified as
正解：A
解説：
According to the CBCI EDGE curriculum, the foundational definition of an EDGE Certified green building is one that achieves a minimum of 20 percent savings in energy, 20 percent savings in water, and 20 percent reduction in embodied carbon in materials when compared to a local baseline or benchmark defined within the EDGE software. This local benchmark reflects standard building practices, climatic conditions, and typical construction methods for the specific country where the project is located.
The 20-20-20 threshold represents the minimum performance requirement for achieving EDGE Certified status. Higher performance levels, such as EDGE Advanced, require at least 40 percent energy savings but still maintain the 20 percent thresholds for water and materials. Therefore, option B reflects the requirement for EDGE Advanced, not the base definition of a green building under EDGE.
Option C is incorrect because EDGE comparisons are always made against a locally defined baseline, not buildings in other countries. Option D is incorrect because EDGE evaluates embodied carbon in materials, not waste reduction as a core certification metric. Therefore, the correct definition aligns with option A.e, the user type that has access to the Share Subproject function is the Owner.
質問 # 37
What is a valid use for collected rainwater to qualify for savings under EDGE?
正解：A
解説：
In the EDGE water assessment, rainwater harvesting contributes to savings only when the collected rainwater is used to directly reduce the building's demand for potable or municipal water. The curriculum explains that qualifying water savings must come from substituting potable water in recognized end uses such as toilet flushing, irrigation, and cooling tower make-up water where applicable. When rainwater is used as make-up water for cooling towers, it displaces treated potable water that would otherwise be required for heat rejection systems, and this reduction is captured in the EDGE software water calculations.
By contrast, options such as groundwater recharge or simply redirecting rainwater to drains or nearby water bodies do not reduce the building's potable water consumption. These actions may be beneficial for stormwater management, flood control, or environmental protection, but they do not represent a direct offset of the building's indoor or process water demand in the way EDGE quantifies water savings for certification.
Therefore, the valid use that qualifies for EDGE water savings in this question is using collected rainwater for cooling towers.
質問 # 38
Energy consumption calculations in EDGE are based on:
正解：A
解説：
The EDGE software uses a simplified approach to calculate energy consumption, focusing on accessibility and speed for users in emerging markets. The EDGE Methodology Report explains the calculation method:
"Energy consumption in EDGE is calculated using steady state calculations, which assume constant conditions over a period to estimate energy use for heating, cooling, lighting, and other systems. This method simplifies the modeling process while providing sufficiently accurate results for the purposes of EDGE certification" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option B, steady state calculations, directly matches this approach. Option A (hourly simulation) is incorrect, as EDGE does not use dynamic simulations: "EDGE does not employ hourly simulations, which are more complex and resource-intensive, as the goal is to provide a fast and simple tool" (EDGE User Guide, Section 2.1: EDGE Software Overview). Option C (quasi-steady state calculations) is also incorrect, as EDGE does not use this intermediate method: "Quasi-steady state methods, which account for some dynamic effects, are not used in EDGE to maintain simplicity" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option D (cooling and heating degree days) is a metric used to estimate climate impact, not the calculation method: "Degree days are inputs to the steady state calculations, not the method itself" (EDGE User Guide, Section 3.2: Climate Data Inputs). Thus, steady state calculations (Option B) are used for energy consumption in EDGE.
Reference:EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods; EDGE User Guide Version 2.1, Section 2.1: EDGE Software Overview, Section 3.2: Climate Data Inputs.
質問 # 39
Which of the following measures require testing by the EDGE Auditor at the site audit?
正解：B
解説：
According to the CBCI EDGE certification procedures, certain measures require physical verification and performance testing during the site audit to confirm that installed systems match the design-stage commitments entered in the EDGE software. Low-flow faucets for bathrooms fall into this category because their compliance depends on measurable flow rates. During the audit, the EDGE Auditor may use flow- measuring devices to test fixture discharge rates and verify that they meet the specified liters per minute used in the improved case calculations. This ensures that projected water savings are genuinely achieved in practice.
In contrast, measures such as a green roof are typically verified visually and through documentation such as drawings and material specifications rather than performance testing. Condensate water recovery and wastewater treatment systems are usually confirmed through installed system inspection, capacity checks, and documentation review, but not necessarily through direct flow-rate testing at each fixture point like low-flow faucets. The curriculum emphasizes that fixtures with defined performance parameters, such as flow rates, are subject to on-site testing to maintain the integrity and credibility of EDGE water savings claims.
質問 # 40
......
長年にわたり、JPTestKingはずっとIT認定試験を受験する皆さんに最良かつ最も信頼できる参考資料を提供するために取り組んでいます。IT認定試験の出題範囲に対して、JPTestKingは豊富な経験を持っています。また、JPTestKingは数え切れない受験生を助け、皆さんの信頼と称賛を得ました。ですから、JPTestKingのEDGE-Expert問題集の品質を疑わないでください。これは間違いなくあなたがEDGE-Expert認定試験に合格することを保証できる問題集です。JPTestKingは試験に失敗すれば全額返金を保証します。このような保証があれば、JPTestKingのEDGE-Expert問題集を購入しようか購入するまいかと躊躇する必要は全くないです。この問題集をミスすればあなたの大きな損失ですよ。
EDGE-Expert模擬問題: https://www.jptestking.com/EDGE-Expert-exam.html
さらに、JPTestKing EDGE-Expertダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1722xeS2odl2YGHrHQkG2ce1gp_UI2Bgm